This is the 3rd time i watch this because i keep forgetting.. DONT YOU EVER DELETE THIS VIDEO !! Thank you :3
@muteFPV6 жыл бұрын
Hehehe :) Your welcome :)
@donphobos2 жыл бұрын
You are my savior! Have read the manual, but it is impossible to do it right. Watched your tutorial, and now I can use any power. Huge thanks!
@muteFPV2 жыл бұрын
I am so happy (and surprised) that this video is still helpful! Thank you very much for the feedback
@ivoryviking6 жыл бұрын
Right on. Mine is in the mail. Just researching all I can. Will be back to review and unlock when it gets here. Thx again. Super helpful videos.
@muteFPV6 жыл бұрын
:D You're welcome!
@danielsfamily90966 жыл бұрын
You sir or mam, are a life saver!!! Im new to this and i blew my old vtx up. So i put a new one in and this video was perfect for showing me how to set it up! Thank you so much!
@muteFPV6 жыл бұрын
Your welcome! Glad to hear that I helped :)
@kerashinnaidoo30132 жыл бұрын
Thanks for the help. Great video with instructions.
@muteFPV2 жыл бұрын
You're welcome, I am glad you found it useful!
@davidanderson62226 жыл бұрын
I’ve been buying the tbs vtx’s for a while, but this one puzzled me. Thanks bro!
@muteFPV6 жыл бұрын
You're welcome :)
@SkullDrones5 жыл бұрын
Best tutorial for this!!!
@muteFPV5 жыл бұрын
Thanks! I should redo it with my current editing "skills", I never expected it to last so long
@SkullDrones5 жыл бұрын
simplicity and clarity is one of the secrets of success! keep creating good tutorials!
@muteFPV5 жыл бұрын
Stick around, working on some new stuff ;)
@graywoulf4 жыл бұрын
Thanks for the tutorial. I now have an unlocked VTX. And yes, I do have a ham licence. I missed the last part at first to save the settings but I figured it out. ;^)
@muteFPV4 жыл бұрын
You're welcome! I am happy to see that this video keeps helping people :)
@quisdcccful7 жыл бұрын
Can't wait for the test. 😀
@muteFPV7 жыл бұрын
+Marquis Hubbard probably ready by Monday ;)
@RYVENANT4 жыл бұрын
Thank you very much for this video!
@muteFPV4 жыл бұрын
You're welcome!
@iNaateeDaawgg Жыл бұрын
How do you put this into bind mode?
@muteFPV Жыл бұрын
Hello! This video is for a VTx board, it transmits video signal and does not need to bind, like a receiver board would.
@iNaateeDaawgg Жыл бұрын
@@muteFPV thanks for replying! I have a tbs source one build from a few years ago that I’ve just got out the attic, do I bind to the f4 fc?
@muteFPV Жыл бұрын
Sorry I just saw your reply. I suppose you already figured things out after all this time :)
@MCsCreations7 жыл бұрын
Really nice! And interesting!
@muteFPV7 жыл бұрын
Thank you +MC's Creations :)
@MikeLaRock887 жыл бұрын
Wow! Thank you so much. I just got the Diatone GTR90 and it has this unify vtx. Never knew I could get soooo much range. Subbed 🖒
@muteFPV7 жыл бұрын
+Infinity FPV :) do you like it? Any comments? I haven't tried it.
@MikeLaRock887 жыл бұрын
muteFPV yeah I love it! I have no complaints so far. After getting some gemfan props and a little tune(stock pids aren't bad, just not great), I can keep up with bigger quads like it's almost unfair. It takes corners so fast because of the low weight and it's power is through the roof on 4s. If you decide to get it, Id stick with 3s for now and found these pids to be spot on kzbin.info/www/bejne/fHq5l5mdo5mkhbs.
@muteFPV7 жыл бұрын
+Infinity FPV sounds great, thanks! :D
@worstpersonview5365 жыл бұрын
huge help! Thanks!
@muteFPV5 жыл бұрын
You're welcome :)
@Switch180fpv4 жыл бұрын
Haha I think I saw this video a year ago and just got a unify and needed a reminder thanks
@muteFPV4 жыл бұрын
Hehehe nice! :D
@florianadam81936 жыл бұрын
VERRY GOOD TUTO THX ELLO FROM FRANCE
@muteFPV6 жыл бұрын
Your welcome :)
@markusackermann46687 жыл бұрын
That really helped me out. Thanks!
@muteFPV7 жыл бұрын
Your welcome +Markus Ackermann!
@sneekysmurf20846 жыл бұрын
You the man thank you
@muteFPV6 жыл бұрын
Your welcome :)
@martinmacko72979 ай бұрын
by any chance VTX table for BF?
@muteFPV9 ай бұрын
Hello! Please check the TBS data here: www.team-blacksheep.com/vtx-table-for-betaflight.txt
@martinmacko72979 ай бұрын
@@muteFPV but is it valid for v1.0 too?
@thepio14343SWEG3 жыл бұрын
I know this was all well presented etc.. but I just need to double check.. my vtx doesnt save power level.. do I need to hold button for 3 sec or more to save?
@muteFPV3 жыл бұрын
If I remember correctly yes, you press and hold for 3 sec to toggle between the options and then exit/save. Which frequency are you trying to save? Have you unlocked the VTx?
@thepio14343SWEG3 жыл бұрын
@@muteFPV vtx unlocked, both red and blue stay on.. so channel 5 and band E save, only the power mode doesn't save.. I literally have to power on and change power setting before every flight..
@muteFPV3 жыл бұрын
Based on the manual, E5 should be fine if unlocked. Can you please try other frequencies and see if it saves the power level or not? For example A1 and R5.
@fabioicardi85463 жыл бұрын
Hi, it is possible to unlock sixty9 tbs vtx?
@muteFPV3 жыл бұрын
Hello, I have not used it so I am not familiar with it at all
@erad054 жыл бұрын
what is PIT Mode?
@muteFPV4 жыл бұрын
Pit mode is a very low power mode so you can power on your quad (to set it up, troubleshoot etc) around other pilots that are flying, without causing interference to their video feed.
@erad054 жыл бұрын
Thank you
@Nerotheos Жыл бұрын
Helo, locked mode this Vtx did not Show the frecuency?
@muteFPV11 ай бұрын
Sorry I don't understand what you mean
@leninegarcia83913 жыл бұрын
Hi! I have a question Does it matter if I connect this vtx to a 9V pad on the flight controller?
@muteFPV3 жыл бұрын
The Unify Pro HV can work with voltage from 2S to 6S, so it will be perfectly fine. Please make sure that you have the exact same VTx, or check the operating voltage of your VTx first.
@leninegarcia83913 жыл бұрын
Thanks!
@CrixyTnT7 жыл бұрын
Awesome tips keep it up
@muteFPV7 жыл бұрын
Thank you +TriniRCmodels!
@doktordrone5 жыл бұрын
thank you very much 👍😁👍🙏❤️
@muteFPV5 жыл бұрын
You're welcome!
@garethhayman6 жыл бұрын
thanks mate!
@muteFPV6 жыл бұрын
You're welcome :)
@adrianboimvaser4 жыл бұрын
Does the TBS Unify v1.0 have led lights? I believe it's fried after I almost turn my drone into a submarine.
@muteFPV4 жыл бұрын
Damn! I can't remember :S Did anything else survive?
@adrianboimvaser4 жыл бұрын
@@muteFPV the RC didn't work for a day, but now everything else is working fine.
@muteFPV4 жыл бұрын
OK, that is very good news!
@adrianboimvaser4 жыл бұрын
@@muteFPV vtx is still dead though, and I can find replacements in this shitty third world country
@muteFPV4 жыл бұрын
Where are you located? Any local FPV groups over there?
@oliverlao6 жыл бұрын
Hi, mine is solid orange at power up... What does that mean please? Thanks
@muteFPV6 жыл бұрын
I think this means that it is in pit mode. You can find the manual from TBS website (or google TBS Unify manual .pdf), it has all the info and status LED meanings in detail.
@rasenmaher76666 жыл бұрын
Is there a Short way, to leave the Pit Mode via the osd?
@muteFPV6 жыл бұрын
I don't know +Linus st if there is a short way via OSD, maybe a LUA script would be quicker but I haven't tried it.
@ora31326 жыл бұрын
How can I also unlock the channels marked with Grey?
@muteFPV6 жыл бұрын
I haven't bought any Unifies recently but I have been told that some frequencies have been restricted and remain restricted even if you unlock the VTx. Do you mean those?
@NunoFlyer5 жыл бұрын
Hello my friend, I tried in my tbs unify pro hv 25-1000mw but I can't unlock, do you have any idea how to do that? Regards
@muteFPV5 жыл бұрын
Is that the SE version? I don't know if they changed the button sequence, I don't have that VTx. Better consult the TBS manual :)
@NunoFlyer5 жыл бұрын
@@muteFPV Yes, TBS Unify PRO HV SE 1000mW 5.8Ghz MMCX, I can unlock but some channels that show in black on manual are blocked always.
@muteFPV5 жыл бұрын
Ah yes, it must be in order to comply to regulations. Still, I don't have such Unify to check for you. Does the manual say if it can be fully unlocked?
@NunoFlyer5 жыл бұрын
@@muteFPV I can understand now, black channels marked in the manual only possible with special requests(custom firmware) 👍 Thanks for your support
@muteFPV5 жыл бұрын
Thanks for the feedback, now I know too :)
@rl27696 жыл бұрын
This video was huge help to set up manually. Thanks. I have set up smart audio and I can change my pids and every thing from the osd. But for some reason when I go to the vtx menu , it doesn’t have any info, only ------. (In SA vtx menu and I’m using tbs unify pro hv ). If I look in TA vtx menu , it shows channels and everything. But if I change them nothing happens. Do you know what I might be doing wrong? Smart audio works fine on my other rigs.
@muteFPV6 жыл бұрын
I assume wiring and betaflight settings are correct, since you have other setups like this. Is there any chance that the TX pad you are using has been mapped to something else?
@rl27696 жыл бұрын
muteFPV this set up is still on betaflight 3.1.3. I read a comment somewhere else that says I may need to try a newer release of betaflight. I’ll down load 3.5 next time I get a chance and see if that helps.
@rl27696 жыл бұрын
muteFPV I’m using an frsky xsrf40 board. Uart 6 is smartport and serial rx is smart audio. It works fine with the same board on betaflight 3.3.6. Maybe there is just a bug with 3.1.3
@muteFPV6 жыл бұрын
Let's hope so :) Let me know if this solves it, for future reference
@rl27696 жыл бұрын
muteFPV will do. Thanks for the reply . ( no one else did)
@makerhobbyist54076 жыл бұрын
I dit the wrong way how to start from the first ?? And I’m getting red&blue solid lights so I’m done on unlock for 800mw or not ?
@muteFPV6 жыл бұрын
To start over, do the same from the beginning. I cannot know what you did exactly and at what point of the setup you are. RED and BLUE are solid so it should be unlocked, yes. You can go into the power selection mode and see if it lets you choose 800mW.
@makerhobbyist54076 жыл бұрын
muteFPV in power it’s not increasing more than 600
@muteFPV6 жыл бұрын
500mW you mean. So it only blinks 3 times for 500mW and then goes back to 1 blink for 25mW?
@muteFPV6 жыл бұрын
Also check this manual, it also has a schematic of the user interface: www.team-blacksheep.com/tbs-unify-pro-5g8-manual.pdf
@thomasfetter6 жыл бұрын
thx
@muteFPV6 жыл бұрын
Your welcome :)
@NickB25137 жыл бұрын
I've just bought the Unify pro but when it arrived its the TBS unify Pro HV race edition. Is this able to go up to 800mw?
@muteFPV7 жыл бұрын
No, the RACE version goes up to 200mW. You can check the comparison table of TBS here: team-blacksheep.com/img/gallery/Unify-Pro-Guide.jpg The RACE version costs less so you should at least get a partial refund, if not a replacement. Just curious, where did you buy it from?
@NickB25137 жыл бұрын
Hello, I bought it from Quadcopters UK. I've contacted them today and they said that they will swap it if I send it back! Luckily I didn't open the packaging. Lesson learned, I should have done a little more research before buying it.
@muteFPV7 жыл бұрын
+Nick Boylan oh I thought it was the store's mistake - good to hear they can replace it
@e23464377 жыл бұрын
Question: I've just started using this VTX with SmartAudio and the Betaflight LUA script on Taranis, and I wonder if using the LUA script actually changes the power output to 800mw if I haven't manually unlocked the unit? On a locked VTX straight out of the package, the LUA script will let me select 800mw, but I have no way of knowing if it actually puts out 800mw as I don't have an RF power meter.
@muteFPV7 жыл бұрын
If I remember correctly, adjusting the VTx via LUA unlocks the VTx automatically.
@NotebookElite5 жыл бұрын
tried it at the moment with the betaflight osd menu.. the vtx is locked, but i changed to 200mw and the red light flashes 3 times and the blue one 2 times, but only the blue light is lighting solid.. so am i in the 25mw mode or in the 200mw? xD
@MojoPapiFPV7 жыл бұрын
After unlocking and setting all 3 options, I hold it down till I see the blue light but settings are sometimes reset. Any idea what could cause this?
@muteFPV7 жыл бұрын
Hey +MojoPapi FPV! Try pressing the button for ~2 sec and then releasing it (instead of waiting for the blue led) when entering / cycling through / exiting the 3 settings. I can't check it right now and I usually do it without thinking so I don't remember why this could happen.
@MojoPapiFPV7 жыл бұрын
I had. Turns out it was the Crossfire Micro. When running SA through CRSF Channel 4, it resets when you set via buttons.
@muteFPV7 жыл бұрын
Oh, OK :) Good to know from now on :)
@MojoPapiFPV7 жыл бұрын
muteFPV at least true for Raceflight.
@jandomingo98066 жыл бұрын
I got my diatone gtm3, i set my channel, i set my band then power output. Hold 3 sec for blue light to go on to save and exit. But after i pull the battery out and power up again all my channel and bands n power output are back at stock... how do i save my setting or can it not do that?
@muteFPV6 жыл бұрын
Is it also set up to use smart audio? If I remember correctly, this could be the reason
@jandomingo98066 жыл бұрын
muteFPV if it is set up by default to on does that mean i can chose and save my settings in the osd instead?
@muteFPV6 жыл бұрын
I don't have any of the Diatone BNFs but I would expect that it is set up properly right out of the box. Try changing it through your OSD and let me know if it worked :)
@jandomingo98066 жыл бұрын
muteFPV omg... i went in the osd and set them. I think it saved because i powered off and on and it stayed the same band and channel. No wonder people want smart audio.. awesome. Will test my gt m3 when i get a chance to fly.
@muteFPV6 жыл бұрын
:D
@sinablookat92605 жыл бұрын
mine wont save it , I tried with 3 different unify pro, !!! I could change it to 800mw but after removing the battery it will back to 25mw next time I connect the battery, is there anyway to save it please, ? I think that I am doing something wrong although i did exactly as you showed, but there should be a way to be able to save it , isnt it ? thanks
@muteFPV5 жыл бұрын
Are you using smart audio / lua script at the same time?
@neilrobertson13457 жыл бұрын
Yes just use band 4 because i have Dom v3 fatsharks, and channel 3 because 3 off fly at same time like to keep cpuple channels apart seems to work good,have noticed with tbs unify when you plug in when someone eles flying does not black out other poilts when they flying top vtx yes more info testing vids be so nice keep up great work
@muteFPV7 жыл бұрын
Thank you +neil robertson
@Habaneropeppah5 жыл бұрын
I have this VTS in a new Diatone GT-m530 and I am struggling to get the video setup correctly. The video feed is acting like its in PIT mode. I have no data that displays in my status display. Followed the instructions in the video, and now I have it in Unlocked mode (both lights on), but my smartaudio settings will not save, and I lose all video beyond 20ft line of sight. Any ideas?
@muteFPV5 жыл бұрын
Just to be sure, can you please check page 14 of the manual and make sure you are not always in Pit mode when powering on? www.team-blacksheep.com/tbs-unify-pro-5g8-manual.pdf
@Habaneropeppah5 жыл бұрын
@@muteFPV I appear to not be in Pit mode. According to the manual, my vtx is in unlocked deactivated pit mode, as I have both the red and blue lights on after startup. My smartaudio settings sill does not display the status of my channel, and it wont save anything. I use "save and exit" and "save and reboot" but all settings go back to default each time. Video signal is still sketchy at close, line of sight range, and 100% lost after 25ft line of sight. I cant find any other resources to help me figure this out. Any additional suggestions?
@muteFPV5 жыл бұрын
Firstly I would remove the smart audio wire and confirm that the VTx works properly through the hardware button. Enter Pit mode and Exit Pit mode again to make sure. Then set the Band, Channel and Power values you want, and confirm it works as expected. If so, then there is something wrong with the way Smart Audio has been set up. Also check the info in this link (operational models etc), I found it in my bookmarks: github.com/betaflight/betaflight/wiki/Unify-Smartaudio
@abeclassified4915 жыл бұрын
I was wondering why my transmitter was so weak
@muteFPV5 жыл бұрын
:)
@p010fpv7 жыл бұрын
your timing could not be better, thanks!👍🏻
@muteFPV7 жыл бұрын
Your welcome +p010fpv!
@neilrobertson13457 жыл бұрын
Very reiable vtxs have 5 off them on all my quads
@muteFPV7 жыл бұрын
+neil robertson yep :) which frequencies are you using the most?
@mybluebelly5 жыл бұрын
It`s actually difficult for the eye to read the red letters with the cutting mat background.
@muteFPV5 жыл бұрын
It was, yes. I have changed many things since then ;)
@Budrick3Gaming5 жыл бұрын
They couldnt make this anymore of a pain in the asssss if they tried.
@muteFPV5 жыл бұрын
I honestly never expected that so many people would look for instructions about this. It is a pain indeed.
@mybluebelly5 жыл бұрын
@@muteFPV You know i still don`t understand what pit mode is and if this is something i need to access to make the vtx work. It is the term PIT MODE i don`t understand what is. Please tell me in plain letters what pit mode means. Thankyou !
@muteFPV5 жыл бұрын
@@mybluebelly in simple words PIT MODE refers to a mode in which the VTx transmits at negligible power (if at all, don't know if some brands refer to their 0mW setting as pit mode). They call it PIT mode because it is very important to use it for example in a race, when powering the quad in the "pits" (like the pits in car races), where you don't want to affect other pilots in the pits or in the race. This is why I am worried that maybe you power your Unify in pit mode, but the LEDs you described don't indicate that.
@k1ortia4 жыл бұрын
Amen...been pissing about with mine for over an hour... Had a £10 eachine 800mw with lcd display....absolutely amazing...all set up in under 3 minutes, none of this stress!!
@muteFPV4 жыл бұрын
Yep, far from user friendly imho...
@x_Heffe_X5 жыл бұрын
Whoever thought this was a good way to adjust settings on a VTX needs to be punched in the dick. Good lord...
@muteFPV5 жыл бұрын
@Heffe yep, it is far from intuitive :P
@daveyknowlton80307 жыл бұрын
Rf tests pleeeeeeese
@muteFPV7 жыл бұрын
+Davey Knowlton tonight ;)
@daveyknowlton80307 жыл бұрын
muteFPV I think akk teck is looking for revewers. You sould ask to get an akk x2. I ordered one to test. :)
@muteFPV7 жыл бұрын
They have already been in touch with me. I think they have sent the X2 and X2P.
@daveyknowlton80307 жыл бұрын
muteFPV cool looking forword to them :)
@GURUSPHOTOGRAPHER4 жыл бұрын
dont enter in power level after the 20 seconds
@muteFPV4 жыл бұрын
The procedure I show in the video has worked for a lot of people. Unless TBS changed something or you are using a different TBS VTx, better check the manual to see if the button sequence and/or timing is different.
@graywoulf4 жыл бұрын
I didn't have any problems with that.
@GURUSPHOTOGRAPHER4 жыл бұрын
Its ríght I was wrong
@johnfpv69896 жыл бұрын
i have the same vtx but my range is around 1 metres and then i lose singal WHYY help any1 when i power up my quad the lights is 1 red 1 blue and then 2 red 4 blue and 3red 1 blue and then blue remains on wtf is happening my goggles is vr007 ik they are crap any1 can help???
@muteFPV6 жыл бұрын
What band and channel have you selected on your goggles?
@johnfpv69896 жыл бұрын
i have the 007 so i just click and if i find the singal thats it
@johnfpv69896 жыл бұрын
@@muteFPV think yes but now i cannot save my power lvl to 500 or 800 mw...
@muteFPV6 жыл бұрын
Better use autosearch while the VTx is a bit further away. If it is very close the signal is very dominant and may make your goggle's autosearch to stop on the wrong channel.
@muteFPV6 жыл бұрын
I cannot check right now but I remember that the more recent Unify VTXs don't allow certain mW power levels on certain frequencies. Please check the frequency chart that was included in the packaging and let me know.
@neilrobertson13457 жыл бұрын
All on band 4 channnel 3
@muteFPV7 жыл бұрын
+neil robertson I have results coming soon on that ;)
@rougeneon19975 жыл бұрын
for f$ucks sakes no wander ppl switch to smart audio
@muteFPV5 жыл бұрын
Unlocking is the tricky part, the rest is OK (although other manufacturers make it much simpler). But yeah, smart audio is amazing compared to all this non-sense.
@bernardhfox5 жыл бұрын
Audio information from speech would have been better than music. Music distracts from following along. Only opinion of course.
@muteFPV5 жыл бұрын
I am fully aware that it would be more convenient (and trust me, much easier and faster for me) but this is my concept for the channel and I have decided to stick with it for as long as I can.
@DAKOROB6 жыл бұрын
Next tym please talk! This was very hard to follow.
@muteFPV6 жыл бұрын
You can always pause or reduce the playback speed. It is tricky for me to choose a duration for the captions that suits everyone, but I am planning to stick to my muted style ;)
@DAKOROB6 жыл бұрын
I should say your instructions were dare I say perfect..but there is a step no matter how many tyms watch this..*12tyms* yeah 12 I'm stuck on the unlock. Sometimes voice commands help some of us (slower kats). But I reiterate your step by step was perfect. I might just be frustrated because I can't unlock the vtx. After the 20sec hold I just get a blue led but can't go above 200 watts on output. I cannot read, see, or find the step I'm missing. Anyways keep up the fantastic work. This vid did at least get me to the menus!
@muteFPV6 жыл бұрын
Which version of the Unify is it exactly?
@mybluebelly5 жыл бұрын
The guy is greek, you sure you still want him to make greek fpv videos?
@mybluebelly5 жыл бұрын
What the hell is smart audio ? I have this device and trying to make it work..........
@muteFPV5 жыл бұрын
Smart audio allows you to change the frequency and power output level of the VTx without having to use its physical buttons.
@mybluebelly5 жыл бұрын
@@muteFPV What, so i can talk to the device and it will obey?? You`re not really telling me a whole lot here. I hate having to sit down for hours trying to figure things out but i don`t have much choice here. YT is a big help ofcourse :) I`m gonna ask you a couple questions and i would be very grateful if you would take the time & respond. What i`ve done so far is hooked up my 800mw VTX to a 3S 450mah battery and using a Triumph RHCP antenna on a separate battery. I have an FS Recon. First time i got a live feed right away so figured this was plug & play. Next time i had to browse around a little bit before getting the feed. So far i figure, good now all i need to do is get airborne. What happens is this: signal rapidly declines from a perfect feed upclose to a screen full of snow a mere 10 feet away. UGH! I`ve tried another CP antenna with the very same result. I tried with and without the motor system hooked up but no difference. I have my vtx directly behind an Eflite Park 400 motor (slowflyer) so the unit has sufficient cooling. What am i doing wrong? I learned how to toggle between channels, band and power today using the blue/red lights and managed to unlock the power setting so i set it to 800mw. I still don`t understand what channels or bands i need to select and if they need to match/corelate with eachother. Today i selected channel 4 and the band with 4 blue blinks. please tell me what channels and what band i should select and just in case i have a dud, how do i diagnose this? Yesterday i had to abandon my flight and go home, no fun :( Thanks!
@muteFPV5 жыл бұрын
OK we need to start from the basics here :) It is too much to type so you will definitely need to dig into explanatory youtube videos or forum posts to comprehend everything. But for the problem you describe I suspect that your VTx and your Recon goggles are not on the same frequency. Channel 4 and Band 4, according to the manual of your VTx, should be F4, which is 5800GHz. You should set the Recon goggles also on F4, manually. If you scan manually or automatically (if there is such feature on the Recon goggles) when being close to the VTx, you will receive a video feed from adjacent frequencies, but this signal will degrade very quickly as soon as you move further away. Try setting both on the same frequency and let me know. Better to take everything one step at a time, I don't want to confuse you :)
@mybluebelly5 жыл бұрын
@@muteFPV Hey, and thanks for taking the time! I`m completely new to fpv so need some pointers :) Exactly how i have to set my vtx is strange magic as of today. So far i havent actually used the goggles to view the menu while tweaking my vtx, just looked at those red/blue flashes. F4 doesn`t ring a bell so need to check that to see if the shoe fits. All them number and combos are confusing a man ;-) I`ll try out your tip and get back to you on this tomorrow. Thanks a million & one :)
@muteFPV5 жыл бұрын
No worries, there is a loooot to learn so take it slow and do solid steps. One thing at a time, trust me, it is better than all things at once :)