Link below to access the Shure Software & Firmware archives. www.shure.com/en-US/support/d...
Пікірлер: 16
@knoxy_de2 жыл бұрын
Thanks for the "Secret Menu"... without this information I would have despaired
@georgeiphone1619 Жыл бұрын
Thank you so much for this
@hodgesofficial2 жыл бұрын
Thank you so much for this!
@jaimefigueroa63662 жыл бұрын
Thank you!
@bernardbiju2581 Жыл бұрын
great work!
@linhanh28162 жыл бұрын
Thank you
@davidstephens820 Жыл бұрын
not helpful when you don't address connecting the Reciever to the computer/mac. Anyone know how you do this? thanks
@claudegervais209 Жыл бұрын
Not very complicated a network wire between the Laptop and the QLX, and in DHCP mode automatic address. The Shure update program will find it.
@kodybryantmusic7357 Жыл бұрын
@@claudegervais209 what is dhcp mode?
@SKu112142 Жыл бұрын
@@kodybryantmusic7357 The Dynamic Host Configuration Protocol (DHCP) is a network management protocol used on Internet Protocol (IP) networks for automatically assigning IP addresses and other communication parameters to devices connected to the network using a client-server architecture.
@chynamanmusictv29 күн бұрын
Great video! I was able to correct my initial error of 007 by updating the microphone. However, I now have an error 008. I've tried to re- update the transmitter 5 times, but it's still the same issue. It syncs and works perfectly, but it can't seem to detect the amount of power in the Shure sb900 battery. Please help.
@nslnz18 күн бұрын
We have found this from a user guide that may assist. Err.008 - Shure SB900 Battery runtime does not appear on the display. Check that the batter is firmly installed into the battery compartment, if condition persists, replace the battery.
@jsjohn701727 күн бұрын
How to update receiver qlxd4 from firmware 1.1.1.x to 2.7.1.x?
@nslnz18 күн бұрын
If the receiver won’t update straight to the current version, try 2.1.5.0 as a starting point and then try again. The older versions of firmware are selected in the SUU from the “Version to Install” field. From 1.36min in our video - the “Version to Install” field has a drop down menu. If you click in this field you will be able to select the older versions of firmware
@pabloparadajerez8549 ай бұрын
Thanks, how fix the 007 error?
@nslnz9 ай бұрын
Hi Pablo, thanks for watching. ‘007 error’ is a firmware mismatch. QLX-D requires all transmitters and recievers on the network to be running the same firmware version. Can you update both, please note that the IR-link to be held steady for the entire duration of the update, otherwise you can cause an error again.