Just received mine in the mail today. Thanks for your videos! They really help a lot
@DrewCreal3 жыл бұрын
Congrats Ryan, enjoy your new amp!
@TacticalDingus Жыл бұрын
where I go for all my THR learning xD, thanks brotha!
@Killthemall42 жыл бұрын
Yes,I update the amp and now the AIRSTEP yet works thank you
@DrewCreal2 жыл бұрын
Glad that worked for you!
@frederickthompson86863 жыл бұрын
Extremely helpful! Thanks.
@DrewCreal3 жыл бұрын
Glad it was helpful!
@michael_caz_nyc2 жыл бұрын
Off topic: Whats the difference between the G10T or G10TII in terms of Using a THR30II without Guitar cables? Appreciate any input.
@musicalengineer Жыл бұрын
I like the sound and generally love Yamaha products, but I find the App Very Buggy! And I've used it with MacOs, Windows, and iOS, with USB and Bluetooth. The Firmware Update feature almost always fails and the App hangs. Other than that, it's a good sounding portable "amp"
@luisalbertomoreiragodoy27792 жыл бұрын
I did this and now my thr30II that just came today doesnt work anymore. in the tunner leds a letter "u" appears and thr remote says "no device". reseting with buttons doesn't work. the firmware update ended succesfully and turned off the thr after. when i turned back on it was like this.
@Ramonstreak Жыл бұрын
Bro any solution for your THR I had same problem?
@elvarwinston Жыл бұрын
Ohh im having the same problem with it being stuck on U ! Did you guys find a solution?
@njojje3 жыл бұрын
thanks for making these videos
@DrewCreal3 жыл бұрын
You are welcome, thanks for watching!
@watchfan61802 жыл бұрын
Very helpful and it worked eventually
@lassefredriksen3532 Жыл бұрын
PS! I ve got failure warning every times. It’s not enough to use USB cable. Even THR IS FULLY CHARGED YOU HAVE TO USE power cable when updating 👍
@Afterasimplelife Жыл бұрын
thanks!
@graycolors28793 жыл бұрын
How do you find new "Open" cabinet tuning vs old "Focused"? I tried THRII30 twice and returned it, because I didn't like that focuses, dull sound....
@DrewCreal3 жыл бұрын
I guess the THR is not for everyone. I happen to really like the amp though.
@greg6162 Жыл бұрын
I think you select it in the mobile app… should be an option to use open and I’ve heard it sounds better
@permculture2 жыл бұрын
I think I got it but at minute :57 all of a sudden you got a screen showing the Yamaha installation. Did I miss where you installed the downloaded app? Does it automatically install to a specific location on a drive?
@DrewCreal2 жыл бұрын
Usually you want to download the app to your "C" drive or operating drive, not another storage location. Hope that helps.
@latheofheaven1017 Жыл бұрын
Thanks for the video Drew, but I'm afraid I fell at the first hurdle. When I open up the Tools window, it doesn't show the update button. What now? I was going to try the firmware update to see if I could kickstart the Bluetooth connection which stopped working about a month after the 12-month guarantee expired. Pressing the Bluetooth button no longer does anything. Nice little amp, but perhaps not the most reliable. Whereas your version says it's 1.31.0k, my version is 1.40.1a)
@tito_pane8 күн бұрын
hi there fellas! can anyone confirm that the leatest version is the 1.44.0a ?
@w1ndedits6063 ай бұрын
My thr remote app usb symbol keeps blinking
@DrewCreal3 ай бұрын
Sorry to hear this, I’m not exactly sure what issue you may be having. Try turning the THR off and then on again, while it’s plugged into the computer via USB, I’ve had to do this a few times and then the computer will recognize the amp. Then I would make sure you’re running the latest firmware and update.
@jean-philippecote6403 Жыл бұрын
Hi, Sorry to disturb you I have problem. With my thr30. When i turn it on ... there is always a buzzing sound... Have you ever heard of this problem. because I don't know what to do. I have it for just 1 year and it work well since 2 week.
@coolgmr15178 ай бұрын
Hi Drew. Just asking about my thr10ii, why it shows U once I turn on the power. Even the app couldn’t be used. Thanks.
@DrewCreal8 ай бұрын
The only time I've seen the U is when it's been updated. I would try updating the firmware on your amp and see if that fixes it.
@coolgmr15178 ай бұрын
@@DrewCreal it shows U since I was updating the amp last night. It currently not working at moment. Might my amp need to restore.
@DrewCreal8 ай бұрын
@@coolgmr1517 yes try a factory reset. Make sure the computer that you're updating with has the newest version of the THR remote app.
@coolgmr15178 ай бұрын
@@DrewCreal yes, the app is newest version. Even I tried holding 1,3,5 while turn on power. Still shows U
@DrewCreal8 ай бұрын
@@coolgmr1517 I'm really sorry you're having this issue. I haven't had this issue with my amp, so I can't speak to the specific problem. Check some forums and see if anyone else has the same issue. You may need to return the amp to the store you bought it from or see if there's a manufacturer warranty from Yamaha and return it.
@Toquelibre2 жыл бұрын
Hi there, Unfortunately I keep getting the Failure message every time I try to reboot. Am I not holding the power button down long enough? It shouldn't be this complicated.
@PlouplePoupi3 жыл бұрын
Thanks a lot🇫🇷👍🏼🍒
@DrewCreal3 жыл бұрын
You are welcome!
@jimhansen53953 жыл бұрын
Can your Line6 G10 transmitted firmware be updated using the Yamaha USB connection to your computer?
@DrewCreal3 жыл бұрын
Yes, when you have your THR plugged into your computer via USB, the Line 6 G10 will automatically update when you run a firmware update.
@SteveStockmalMusic3 жыл бұрын
Absolutely frustrating folks. 😔 I run ProTools, I record bands all the time, and for some reason I’m just completely lost as to how to get this amp to record via USB. I’ll just keep going direct unless anyone has any helpful suggestions.
@silveroliver43463 жыл бұрын
Connect the THR-ii to USB into your computer and ProTools should instantly recognize the THR-ii as an audio interface. If not, select it manually.
@SteveStockmalMusic3 жыл бұрын
@@silveroliver4346 Tried it, didn’t work, I don’t know where to find the option to select it manually. Any ideas? Thank you
@DrewCreal2 жыл бұрын
Hey Steve, sorry to hear that you're having issues. Did you get it resolved? Feel free to give us an update if you can.
@nahuelp.l.35262 жыл бұрын
I just solved the second problem. It was just installing the lastest version of the thr app, then it could detect the update needed.
@SteveStockmalMusic2 жыл бұрын
@@nahuelp.l.3526 woohoo Thanks !!!!!
@DeGroove2 жыл бұрын
Just updatet my THR-II 30 for the first time and also had troubles first time. Second try...worked but presets didn't restore... all presets gone and unfortunately I just don't seem to get the same sounds out of it anymore, it just sounds a lot thinner...Anyone knows if I can find the back-up presets on my computer or maybe the factory presets online or experienced something like this? Kinda frustrating...sounded really good before the update...
@DrewCreal2 жыл бұрын
Try doing a factory reset on your THR, and maybe running the firmware update again. Sorry you're having issues man!
@DeGroove2 жыл бұрын
@@DrewCreal Thanks for the response, no worries, these things happen. In the meantime I did discover the factory presets through the app and was able to create some nice new sounds but I still have a feeling that it’s not entirely sounding as before the update. Especially the clean amp setting seems to be thinner. Might try that factory reset. This is probably also done through the app somehow? Thanks again. Take care.
@greg6162 Жыл бұрын
@@DeGroove there’s a setting you can change that I’ve heard makes the speaker better. Something in that app you set it to open? Not sure I just got mine delivered today and I’ll mess with it when I get home from work. I don’t have a working PC unfortunately but I’ve heard the newer ones may already be updated? Again not sure just what I’ve read online
@quit2933 жыл бұрын
I didn't turn on amp for 2 weeks no it sounds like crap. The Bluetooth speaker sound is horrible any idea how to fix it?
@DrewCreal3 жыл бұрын
I think you can control the treble and bass for the bluetooth playback portion of the amp. I didn't think it sounded that bad.
@quit2933 жыл бұрын
@@DrewCreal thanks I will try it.
@SteveStockmalMusic3 жыл бұрын
hi, at 1:03 you're looking at the amp simulation on your computer screen. Where did you find that please? Signed, "lost but hopeful"
@cmeimgee3 жыл бұрын
Also wondering about this!
@DrewCreal2 жыл бұрын
Here you go: Windows: usa.yamaha.com/support/updates/thr_remote_win.html Mac: usa.yamaha.com/support/updates/thr_remote_mac.html
@SteveStockmalMusic2 жыл бұрын
Thanks 🙏
@michaelforde43733 жыл бұрын
Just won't sync with brand new computer , sync just spins , good amp lousy software
@DrewCreal3 жыл бұрын
I've had similar issues before, pretty frustrating that it does that. I hope they update it and fix the bugs!
@montigol Жыл бұрын
the app is absolutely brutal. completely useless. fun amp tho.
@DrewCreal Жыл бұрын
What kind of problem are you having with app?
@montigol Жыл бұрын
@@DrewCreal If it doesn't crash immediately, it only recognises the amp via Bluetooth or USB about 50% of the time, and it never ever makes it past the "back up your presets" stage. Didn't work? Try again. And on and on and on.
@montesa91364 ай бұрын
Anyone know why my "update section" is greyed out so I can't select updates?
@greg6162 Жыл бұрын
With today’s technology there’s no reason why you shouldn’t be able to do this with an app? I don’t even have a working PC anymore unfortunately… haven’t needed one until now