Very informative, I will check my diamonds using this technique
@mendozaconsultation3 жыл бұрын
Does that tester work with other gemstones like emaralds,saphires ex. And if so,how do you use it to test those.?
@kathyrobberstad55223 жыл бұрын
Best video explains how to actually use this tester
@insanity33353 жыл бұрын
When testing for a diamond that's mounted on a ring, necklace etc., you first need to make sure you're using your bare hands to hold the metal part of the jewelry. Make sure you are touching the metal plate on the back of the device. With only touching the diamond, you should be able to get a reading. If you accidentally touch the metal part of the jewelry, it is possible to get a false reading. All the other steps were demonstrated in this video.. If I am wrong in anyway, please notify me please.
@Dannyfr33sh2 жыл бұрын
Thank you so much!!! I kept getting false positive on my gold and silver and this comment helped figure this out !!
@charlescollier3154 Жыл бұрын
I have the same tester I need help I'm stuck on a 6-carat emerald if you put that tester on this Emerald what will it do it would go will it go all the way up to Diamond or will it not move it all
@Jub90004 жыл бұрын
Just a heads up, the first LED is number one, not zero. Yours was just printed off a little just count the total number of LEDs. There are are 4 green, 4 yellow and 4 red. 12 in all. No zero.
@ItAintMeBabe99 Жыл бұрын
That’s funny, other videos say that the 1st LED doesn’t count. Consider it Zero. Which concept is correct ?
@charlescollier3154 Жыл бұрын
If anyone knows this question please help me I have the same tester if I put it on an emerald what will the tester read go all the way up to Diamond or nothing at all thank you
@katiejo1095 Жыл бұрын
It is for diamonds only.
@katiejo1095 Жыл бұрын
Get a Presidium gem tester.
@6Sheepies9 Жыл бұрын
The Snowfurfee Collection¡
@vesa64242 жыл бұрын
Thank you so much for teachings me thank you Universe
@robertbuhrman-nightnova Жыл бұрын
I thought this was a good video but one thing in the instructions was not followed m. It says to test the Top of the Diamond straight not at angles. Does that affect the test ?
@tonymontana27534 жыл бұрын
Mines not working do you have any tips
@corgems39514 жыл бұрын
Nah 😂
@denysephenix23494 жыл бұрын
i have a large Alexandrite and it goes right up as if a diamond.. is that possible?
@autumn80343 жыл бұрын
How do you test something if it is not loose. You can weigh your stones cuz they are not in a ring or necklace. How do you test if the diamond is in a ring or necklace or earrings? I also wanted to know can this machine be used to check if something is silver. Thanks. Hope you get back to me. Nore
@insanity33353 жыл бұрын
When testing for a diamond that's mounted on a ring, necklace etc., you first need to make sure you're using your bare hands to hold the metal part of the jewelry. Make sure you are touching the metal plate on the back of the device. With only touching the diamond, you should be able to get a reading. All the other steps were demonstrated in this video.. The smaller the stone, the harder it is to get an accurate reading. If you touch the metal part of the jewelry, it is possible to get a false reading.
@coltongray352 жыл бұрын
@@insanity3335 I'm confused when you say make sure you are using your bare hand to hold the metal part of the jewelry, then at the end you say if you touch the metal part of the jewelry you can get a false reading. Should you touch the metal part of the jewelry or have it sitting on something and not touch it?
@insanity33352 жыл бұрын
@@coltongray35 I see where it was confusing. I worded the sentence incorrectly. When testing a diamond that is mounted on a ring, make sure you are holding the jewelry with your bare hands (in other words, don't use gloves or lay the jewelry on the table while testing). There is a metal plate on the side of the device that needs to be touched with your skin while the diamond is being tested. With the tip of the device, make sure you are only touching the diamond/stone. If you touch the metal part of the jewelry with the tip of the device, it is possible to get a false reading. I feel like my second attempt was a little more understandable. Lol
@TheOnlyDominik3 ай бұрын
If the calibration table shows 1, set it to 1, read the instructions! You must hold the ring or test platform with your bare fingers and one finger should touch the metal on the back of the tester. This means you must always complete a circuit. RTFM!!!
@kentarofromwiisports10574 жыл бұрын
Nice entertaining video love it!! 👍
@monkz.nguyen9bonedust2033 жыл бұрын
So weird I got the same tester from Amazon but when I hit metal or gold it still beeped diamond ... I think my one isn’t accurate...
@PremiumPr03603 жыл бұрын
You have to touch the back of the metal while you hold it on to the metal. It will beep fast and not diamond
@insanity33353 жыл бұрын
The instructions I received mentioned that if you accidentally touch metal, it could give a false reading for diamonds.
@ItAintMeBabe99 Жыл бұрын
You never mentioned that you have to touch the metal plate on the back !
@craftygiftsbycarolyn50353 жыл бұрын
Never send your stone anywhere
@louiskhalil2109 Жыл бұрын
Ummmm why is my tester beeping like it’s a diamond when just touching the metal plate 😅 and yes I know the difference in beeps
@Aninang234 жыл бұрын
Can i use this in gold?
@theguywiththemustache55984 жыл бұрын
No
@raadraad6603 жыл бұрын
@@theguywiththemustache5598 How do you use it with gold?
@lydiaahubbell854511 ай бұрын
@@raadraad660tests only diamonds and you have to follow instructions.
@PreciousStoneHunters Жыл бұрын
Testers are not accurate when it come to hardness its only use to lab grown or synthetics diamond or moissenite, why not you buy pointed diamond tungsten carbide and do scratch test.
@dawnlennon53312 жыл бұрын
Thank for I fo
@RudolphWhite-q5f3 ай бұрын
PASSED THE SCRATCH/SCRAPE TEST FOR REAL DIAMOND 💎 ON GLASS…IT PASSED BUT THE DIAMOND TESTER FAILED TO PASS…
@leedelany28323 жыл бұрын
Hate the muzak....
@corgems39513 жыл бұрын
Kongratz 😡
@SparksGFX4 жыл бұрын
Ebay took 3 days
@northernaurora_2 жыл бұрын
These testers are junk and a waste of money. They often cannot tell the difference between a diamond and moissanite.
@RudolphWhite-q5f3 ай бұрын
HECK YEAH
@bobbyjohnson36623 жыл бұрын
Nice
@yanmumina72212 жыл бұрын
we needs French instruction
@venkatareddynagaruru92933 жыл бұрын
Can you buy a diamond selector 2 selected stones for one dollar per carat why are you cheating the public
@coltongray352 жыл бұрын
I almost seized up trying to read that
@matthewduman84063 жыл бұрын
Sorry you totally wrong this tester is no good tester
@ابراهيماوبري4 ай бұрын
Hello
@venicegamingchannel62983 жыл бұрын
nise
@sjhart5293 жыл бұрын
No good diymond silector.
@RudolphWhite-q5f3 ай бұрын
SHHHHHHHH!!!…
@kickflippro34 жыл бұрын
I'm just a poor boy nobody loves me.
@mohinderkaur40774 жыл бұрын
Don't worry about money... Just work and money will come along..... Don't let others define you. You are just as good or better than them.
@JHV1664 жыл бұрын
Your're just a poor boy from a poor family...
@Oseantoocean3 жыл бұрын
i only came for the sound effect not ur bipolar narration