How to Use a Metal Lathe - Kevin Caron

[@StephenOshea]

wow i haven't used a lathe in over 40 years. its great to see such a old lathe still in use . bravo great video

[@KevincaronSculpture]

This is a great machine! I finally had to change the bearings in the motor not to long ago. Was the original motor and wiring. Really fun to use and learn on.

[@StephenOshea]

@@KevincaronSculpture its' super nice i used one not so old as yours as part of my. tafe trade skills . . however your is so much older yet it works well thanks for posting

[@pstewart5443]

Crazy how quiet a lathe made 75 years ago is. Would love to have one of those. I really like the authentic and old-school method.

[@KevincaronSculpture]

You and me both! My brother has a wood lathe and when he heard mine he was really amazed! Thanks for watching and posting.

[@oldfarthacks]

If they are making lots of noise, there is a problem. Even more so if the gear trains are disconnected. With just the spindle turning about the only thing that you should hear is the belt that runs from the motor or drive system to the spindle

[@Octokito]

Greetings from the UK! I’m a first year engineering student, and I have an assignment coming up. I need to learn the basics of lathes, and this video gave a really good introduction to them. Thanks for making the video!

[@KevincaronSculpture]

Best of luck!

[@adeboyeridwan8042]

I guess i can learn as well

[@BroImLeandre]

It’s crazy that I know how strong these machines are, but never truly fathomed until I saw some guy get caught in it, whipped around like a rag doll and turned to chunks within seconds.

[@KevincaronSculpture]

Some really scary videos out there!

[@ypaulbrown]

@@KevincaronSculpture YES

[@Metaloid-wv4kz]

thats why i am here now too lol also the old technology is amazing, such a interesting video

[@maxharris8082]

That’s exactly why I’m here just watched the video… I’m not sleeping

[@beelover23]

I didn’t know what a metal lathe was until I watched the video of the Russian worker. I’m used to watching gory stuff but that video traumatized me. These machines are so powerful.

[@NateDG72]

First year Industrial Millwright Mechanic apprentice and this was extremely helpful. We have an ancient LeBlonde lathe in our shop. It's so used that all the dials almost have the increments worn smooth. I had to make a gap spacer for a paddle in a big mixer the other week and this was good to watch beforehand.

[@KevincaronSculpture]

Glad it was helpful!

[@lucky15driver]

Oh my gosh!..... My wife and I had tears in our eyes from laughter after watching the end. Thanks you made our evening!

[@bobwolf3370]

I like the fact he mentioned the safety as well. I know it's common sense but nobody uses it anymore

[@kamie993]

thats what i came for, im doing work for college engineering and need to do research on how to use a lathe safely so it was very helpful

[@bicboi46]

@@kamie993 there’s a recent video of a Russian dude turning into shredded meat using this machine.

[@kamie993]

@@bicboi46 ooh link

[@banginbadger75]

Exactly why I'm here. Stumbled upon the video on Facebook and was horrified by how dangerous these machines are.. call me a bitch but I'm not ever goin near no fucking lathe ever.

[@TheOcculus]

​@@banginbadger75 Have a healthy respect for how quickly that machine can kill you. Use common sense. Short sleeves and no loose fitting clothes at all. Wedding ring, watch, necklace, etc get put in your toolbox when you're working. Life is not safe. Anyone that tells you they've come up with a way to go through life with no risks is a liar. I don't wear any jewelry ever. I have a buddy that doesn't have a ring finger. He jumped off a stake box truck and caught his wedding band on a loose fastener. Tore his finger right off. His finger and his ring were laying on the planks of the truck bed.

[@freshmeatpopsicle]

production value alone, this is a masterful video. bravo, sir.

[@KevincaronSculpture]

Thanks for watching and posting. Please click on an ad or 2 when you get the chance. Helps pay for the videos.

[@ЯнаКудрявцева-ы8ь]

well it's a lathe kzbin.infoUgkxN9zrzkkhnjUF5PQbuA_B1gYdsfCu9k6z but it wasn't what i would have anticipated. Headstock, tailstock, carriage apron are manufactured from aluminum now not cast iron. The spindle diameter for the bearings is too small allowing for a few play in the spindle so I am using some blue Loctite to take out the play.

[@KevincaronSculpture]

It is a fine little lathe. Still learning new things to do with it.

[@D3ss3rtTV]

You inspire me to build stuff, thanks Kevin for all you do.

[@KevincaronSculpture]

Very welcome, thank you for watching and posting. Don't forget to stop by my website and see the rest of my work.

[@heyman5525]

Thanks for explaining the basics to people. I've worked as a welder over 20 years around sophisticated machine shops with ancient and new equipment... but never learned the basics and terminology. Thanks.

[@KevincaronSculpture]

Glad to help

[@damianhans5463]

This video was highly educational for beginners.

[@KevincaronSculpture]

Thank you for watching and posting. If you get a chance. please click an ad or 2. It helps pay for the videos.

[@sydneylukasiewicz5548]

Thank u so much for this video Mr. Caron! I’m a first year metal student and we have one of these, i’ve been able to sorta avoid it for now but it’s been bothering me that i didn’t really know how the basics to operate it were! This video was so helpful and I really appreciate it. ❤️❤️

[@KevincaronSculpture]

Glad it was helpful!

[@gmaclaren]

You did what you said you would do. Very nice. Thanks for the tour.

[@TomHaroldArt]

Thank you for making this video, Kevin. It's a great quick introduction for someone who knows little about lathes, just enough info to make a person want to learn more! I do kinetic metal art, and am seeing a real need for a lathe in my shop. It's time to learn as much as I can so that I make a good purchase when the time comes. I took a quick look at your other videos in your list, and there's lots of good info there! Subscribed!

[@KevincaronSculpture]

Thanks for joining the club!!

[@markkoons7488]

War finishes on industrial woodworking machinery typically have castings just minimally and coarsely ground. Machined surfaces such a table tops were left with coarser machining too.

[@markkoons7488]

I use an Oliver patternmaker's vise built during WW-II. While the dimensions that determine flawless function are all correct, the appearance of the castings is very crude with sprue and mold marks knocked down just enough that the user is not cut by brushing against them.

[@KevincaronSculpture]

This lathe is in better shape than that for sure!

[@freemanfreed1581]

I subscribed for the fact that you make things simple in your voice.

[@KevincaronSculpture]

Thank you, its the only way I know how to think.

[@paulbfields8284]

I spent 9 years one on one with my dad in our own shop to learn the tool and die trade while also attending 4 years of classes through the NTMA Nation Tool and Machining Association. It was very challenging… now after 43 years I’m still in the shop “cranking the handles” designing and building anything I can conceive. I have what dad called “the knack”..didn’t think I would ever attain that stature.. my point being this 7 minute video is great entertainment and certainly informative but this trade can be very dangerous. A little bit of knowledge is dangerous. If you embark on the tool trades get the education from a trained professional. Or else you will burn up a lot of good tools and maybe even lose a finger or an eye. This trade is the most satisfying occupation for me. Mainly since I’m part of 4 generations of tool makers in my family lineage. That makes it even more special. Good luck to anyone that embarks on this very traditional art form..

[@KevincaronSculpture]

Point taken and thank you for watching and posting.

[@rodan2852]

For the price these machines are still fantastic for starting out. Their also rather soothing to the soul. Slow and methodic.

[@KevincaronSculpture]

I can get lost really easy watching the stock go round and round.

[@soundmindtv2911]

I know it’s an old video, but thanks for this! Nice introduction to turning.

[@KevincaronSculpture]

You're welcome! Thank you for watching and posting.

[@cramersclassics]

Nice job Kevin. Great to see an old lathe working well!

[@KevincaronSculpture]

Thanks 👍

[@ll1881ll]

You are an excellent instructor. Thank you for your videos

[@KevincaronSculpture]

You are very welcome! Thank you for watching and posting.

[@thomaschandler8036]

Enjoyed lesson, I too have a Sheldon, just purchased, but haven't used it yet... Still cleaning it up

[@KevincaronSculpture]

Been a great machine so far. Still learning my way for sure.

[@geraldestes2470]

thanks kevin - same lathe the high school shop learned us on back in the day...end of semester maintenance was always fun - adjusting the brass gibbs to the ways, lost lathe dogs, etc. at that time carbide insert bit hadnt yet reached many local machine shops although (brazed on) carbide tip bit were prevalent as well as the standby hss cutters - rule of thumb was nothing exceeding about 7 degrees the 'sweep' and 'relief' of the cutter to the face of the work piece on center (material dependent of course - plastic screwdriver handles were introduced as a required term project.) thanks the demonstration.

[@lyellmincer7468]

Best lathe introductory vid ive seen. Trying to get into metal lathing to make a custom steering stem for my hd to adapt usd forks

[@KevincaronSculpture]

Thanks for watching and posting. I learn the best by doing and it's fun to share.

[@MartinDolan]

Can you do a video about all the different shapes and angles etc of cutting tools? I just got a nice second hand lathe and need to buy some cutting tools and it's a big learning curve to get started when you know nothing :) Not so much threads as that's more advanced, but for example: * Facing the end of something * getting a good surface on a round stock at the right diameter * cutting a grove with a square/u shape/v shape profile * making a conical/tapered shape etc * hollowing out a part (inside cutting) * parting off a finished item And basically what shape cutting tools you'd use to do these things, what angles, heights etc you should attack the metal at I'm an artist too, so it's mainly creative things I'd be using the lathe for so knowing the basics is very helpful! Great video too. I've subscribed!

[@KevincaronSculpture]

Will try to get something together.

[@jasonn668]

Thanks for the informational video Kevin!

[@KevincaronSculpture]

Any time!

[@justusnjuguna6893]

You are a great teacher kevin

[@KevincaronSculpture]

Thank you for watching and posting !

[@ruuman]

Haha! brilliant ending!!

[@USMC_BABE38]

thanks Kevin this is very helpful.

[@mthebone]

You have a great and simple way to explain things. Keep up the good videos ! Muz

[@KevincaronSculpture]

Thanks, I have fun with my "job"!

[@azrls43185]

fantastic instructions! great presentation without all of the unnecessary blubub of amatures.

[@jackson-aka2gs749]

great information, thank you Kevin.

[@KevincaronSculpture]

Glad it was helpful!

[@amo625]

please, explain on how the jaws of a self-centering chuck are changed from internal to external jaws, and precautions that must be taken to ensure concentricity.................your help will be grately appreciated

[@KevincaronSculpture]

Thanks for the idea.. stay tuned..

[@kgthompson5814]

Thanks for your information learning a lot

[@KevincaronSculpture]

My pleasure

[@YT-User1013]

Do some lathes not have a tool height adjustment and shims are used to adjust the tool height? Also, not all lathes have thread cutting capabilities - correct?

[@KevincaronSculpture]

Correct on both counts!

[@RustyInventions-wz6ir]

Just found your channel and Subscribed. Nice work

[@KevincaronSculpture]

Welcome aboard! Thank you for watching and posting.

[@JohnDavis-yz9nq]

Kevin I am going to look at a Sheldon lathe tomorrow. About all I know to look for is the amount of slop in the feeds. Too much slack it is wore out. And look at the gears and see if teeth are missing. And if the bed is in good shape. The man tells me it is a 1938 with 11 inch swing. 110 one horse power motor. Anything else I need to look at? Thanks Kevin

[@KevincaronSculpture]

You got all the high points ! Run it if you can . Listen to how it sounds. No grinding , no struggling to turn. Make sure feed works in both directions. Make sure motor runs in both directions . Should be a great old machine! Good luck!

[@JohnDavis-yz9nq]

@@KevincaronSculpture thanks for the info. I sure wish that you would do a video about lathe maintenance. I really don’t know much about a lathe. Kind of a beginner type video. The man is asking $400.00 for the Sheldon lathe. I don’t see how a person could get hurt on it if it is anything at all for that price. If I buy it I may ask you some questions if that is ok. Thanks again.

[@rameshbharakhada5497]

Your lathe machine is very good

[@KevincaronSculpture]

Thank you. And older than me!

[@toptoolclub9780]

Loved the ending!!! I was thinking about the same thing lol.:0

[@KevincaronSculpture]

Thank you for watching and posting.

[@sjbl1962]

Very interesting video Kevin. Cool cameo by Kermit. I hope to take off from work next week and get some welding time in with my AHP.

[@KevincaronSculpture]

Scott L Always great to get the time to play..

[@jimmygonzalez8647]

So he was trying to turn it off and he got caught 😢 damn

[@bsosmoove]

I'm guessing you're here from the video as well

[@luljankybo6962]

man 🤦🏾

[@craigmack5574]

I’m here from that video to, that shit was so crazy.

[@chrismitchell1343]

Same thing happened to a a good mate of mine.. ripped his arm clean off. Was watching to gain an understanding.

[@jeanvillar9559]

For making exhaust flanges for a 2 stroke exhaust pipe....what kind of lathe would be best for that job? thanks

[@KevincaronSculpture]

Jean Villar Not sure. I would use the metal lathe that I have but don't know how to make one.. Have to learn as I go..

[@astc593]

Thank you! You're a great teacher!

[@KevincaronSculpture]

Glad you think so!

[@Rob-yh7jk]

How do you place your tool What's the best angle for your tool

[@KevincaronSculpture]

I will change the angle of the cutting tool several times while I am working. All depends on the cut I am making.

[@ronbianca9722]

Hey Kevin! I have enjoyed your videos. What do you use your metal lathe the most for? Stay healthy my friend.

[@KevincaronSculpture]

I turn goblets, bowels and such. Use it to make smaller parts for something else and the most important thing I do with it is make lots of chips and shavings!

[@texaslawncare9624]

Thank you for making this video it was very helpful

[@patfleming8647]

hi kevin thanks for the info all about the Lathe,and yes i do think kermit sounds like yourself. regards Pat

[@martik778]

That sheldon is so quiet, Did you lube up the gear train before the video? I noticed you changed the gear box feeds while in motion. Is the Sheldon designed to do that?

[@KevincaronSculpture]

I lube the gear box about once a month. Don't use it that hard or often. Some of the functions are change while running and some you have to stop the machine first. Thanks for watching.

[@Linrox]

hey Kevin, Did you break your Microphone?, it is only recording in Mono.

[@KevincaronSculpture]

Old mic, old video. Much better now.

[@jrdeckard3317]

So how do you know what has to be oiled or not when it is being cut?

[@KevincaronSculpture]

On the machine is a data tag that shows all the lube points and how often. It is almost impossible to read from wear. So I just lube everything every few hours of use.

[@natebarrios3275]

My pops got one from a guy on Craigslist just I keep at the shop never have we used it 😂 and now that u stumbled on to this yt vid I’m going to play around with it to see how she works

[@KevincaronSculpture]

Very cool! I have a lot of fun making things on the lathe. Mostly I make chips and swirls but every now and again I can make what i started out to.

[@A-Aron118]

How much does this weigh and what kind of price would this lathe be?

[@KevincaronSculpture]

no idea on the weight and i paid $2500 for it used.

[@charithaheshan1048]

thanks for the video K!

[@KevincaronSculpture]

Thanks for watching!

[@retiredhappy466]

Very nice video and very educational. I am a retired, savy white collar worker and have an interest in tool & die, however,, I see that I still have a bit to learn.

[@KevincaronSculpture]

You and me both brother!

[@saviourdelvin]

I have loved the video. Thanks 👍👍👍👍👍

[@KevincaronSculpture]

So nice of you

[@minoena]

i saw some scary videos of this, so i wanted to learn about it. thank you for the informative video!

[@KevincaronSculpture]

Fun machine to work with but it does demand respect! Thanks for watching and posting.

[@CharlesStruble]

Good one! Not easy being, well, Kevin, huh? Actually, another excellent video teaching us a little something... Thanks guys! Sheldon... I may have mentioned that Sheldon is my mother's maiden name...

[@KevincaronSculpture]

Charles Struble No way!!! It's a great old machine... been fun learning how to use it..

[@GarbageKnight]

the reason i want to maybe get a small one, is a 1891 weltrecord german antique ratchet screwdriver, i cant find one to restore. so why not remake it. and it would take a metal lathe to do so. and knowing how to work the lathe. but i also need a breech for the ratchet part.

[@KevincaronSculpture]

So much to learn about this machine and what it will do. Would love to find an old retired machinist to show me some tricks.

[@Rob-yh7jk]

Thank you Kevin Whether it's a welding video or lathe Great videos

[@KevincaronSculpture]

Thanks 👍

[@kerrymullins3214]

Hey man, I dig that Diamond Reo emblem on the wall behind you... Cool video, too...

[@KevincaronSculpture]

Kerry Mullins It is from my grandfathers truck..

[@YT-User1013]

Aren’t you also NOT supposed to wear sleeves as well, just like you aren’t in this video?

[@panteraleo4540]

that is impressive . Thank you elder , you've helped a lot with my homework 😅. Greetings from the Poland.

[@KevincaronSculpture]

You are most welcome

[@panteraleo4540]

@@KevincaronSculpture 😊

[@SuzanBouchard]

Thank you very much

[@KevincaronSculpture]

You are welcome

[@PsyMongazoid]

Nice video. Thanks.

[@KevincaronSculpture]

Glad you liked it!

[@sylvanenergy]

Hello my friend, I see the microphone escaped the hammer......lol that a beautiful old lathe.

[@glonch4699]

For some reason i’m here having been completely traumatised by cctv footage of an accident where a worker gets horrifically killed by getting caught in a rotating lathe type machine and i won’t get into details... just wondering if you know the video i’m talking about I don’t exactly know why i am here but it just makes me feel more at ease, interesting video though :) Edit: sorry i’ve just realised that basically every comment mentions it 😂 i don’t mean to be annoying

[@KevincaronSculpture]

I know the video and it is awful! If you do not respect this machine it will kill you! With the right operator it will do amazing work. Fear not but respect you must.

[@jeffreylehn8803]

You shouldn't use the half nuts for turning as they will wear out , this lathe is equipped with a feed clutch and that should be used

[@KevincaronSculpture]

Sad to say but I have no idea what a feed clutch is or how to use it. Care to explain?

[@jeffreylehn8803]

@@KevincaronSculpture sure can , on the apron you have a selector which has three positions , the middle is neutral which is used with the half nuts , the top position is for engaging the cross feed the lower position is for engaging the long feed . The feed clutch is the round knob on the apron , with the selector in any position than neutral with the lead screw running you turn the feed clutch to engage that feed . No you can turn and face under power WITHOUT using the half nuts .I have the same lathe , they are well built machines .

[@jeffreylehn8803]

have you figured out how to use the feed clutch knob ?

[@jeanvillar9559]

What is the minimum lathe needed to make a exhaust flange? (2 stroke) thanks!

[@KevincaronSculpture]

Jean Villar Try this one. www.amazon.com/Grizzly-G8688-Metal-Lathe-12-Inch/dp/B0000DCZ7D/ref=sr_1_1?ie=UTF8&qid=1437839495&sr=8-1&keywords=Small+Metal+Lathe

[@jeanvillar9559]

Thanks Kevin!

[@JD-fh5xl]

Thankyou, i mastered this in high school but ive smoked too much pot since then

[@KevincaronSculpture]

You are welcome my friend!

[@ypaulbrown]

Hey Kevin, whatcha making.......been awhile since I visited, best wishes, Paul

[@KevincaronSculpture]

Hi Paul! Long time for sure. Lots of cool work and a big load to the gallery in Santa Fe. How you doing?

[@ypaulbrown]

@@KevincaronSculpture just hanging in, taking it slow, had a big heart attack two years ago this November, clogged coronary arteries...99% and 100%, luck I went to ER, dropped dead 10 minutes later.....anyway, just got a new 13" Southbend, 1939 build date.....by the way, War Time production finish on you lathe is no filler on casting and less prep on paint, Your lathe is a cutie.....we are making some stainless mobile bars for the hotels here in Orlando, no art.....but challenging, so good to see you doing so well, keep on keeping on...cheers, Paul in Orlando

[@jonasvaitiekunas2713]

great!

[@dakata2416]

Thank you Kermit 🐸

[@KevincaronSculpture]

Happy to help pass along what I learn from doing.

[@burimiljazi2963]

brilliant

[@MichaelRoachWV]

This is all I ever wanted to know... in one video overview lol

[@KevincaronSculpture]

Thank you for watching and posting.

[@MichaelRoachWV]

@@KevincaronSculpture well, I lied. I do have a couple questions, but you still did amazing! Can you put a drill bit in the chuck, and hold the work stationary to use it as a makeshift mill? Can you slot holes? (I know, I know, but this would be huge for custom fabrication / brackets) In what orientations can you do things, etc

[@KevincaronSculpture]

There are always more questions!! LOL, Talking about the chuck and putting a drill bit in it to mill with, NO, it doesn't work that way. I have a drill chuck that fits the tail stock at the other end of the lathe. I can clamp a bit in that and spin the work in the chuck to drill a hole with the non-turning bit. But no, you can't use the lathe like a mill and just move the work across the spinning bit if it was in the chuck. Lathes will round things. That is pretty much all they do.

[@MichaelRoachWV]

@@KevincaronSculpture I believe they're called "Lathe Milling Attachments", essentially adding a vertical vice if you don't have a mill

[@waynegoff764]

Good video.

[@whynoti3174]

Thanks

[@KevincaronSculpture]

Welcome, thanks for watching and posting.

[@kenbenson-clarke2753]

wonderful. superb

[@KevincaronSculpture]

Thank you! Cheers!

[@cerberus1321]

We had one in high school but they never showed us how to use it or what applications it could be used in. They just said it was too dangerous and the 7 years I studied in that department I never seen it in use.

[@KevincaronSculpture]

Awesome machine but must be respected for sure.

[@bradleypease2492]

Herne bay?

[@cerberus1321]

@@bradleypease2492 no I went to school in Ireland

[@dondawson1]

Nice to see Kermit. Now I see the Rainbow connection!

[@KevincaronSculpture]

Donald Dawson I have asked him to sing the song but he just says NO!!

[@كثيرالطيب]

Thanks شكراً

[@KevincaronSculpture]

You are welcome! Thank you for watching and posting.

[@AliTounes2011]

I am not a machinist nor do I work in any industries but I m terrified of these things, I visited recently a factory and when I entered , I turned and saw it behind me I immediately backed instinctively 5 m even if it was off.

[@KevincaronSculpture]

This is a machine that needs a healthy amount of respect. But you don't have to be afraid of it. Thank you for watching and posting.

[@AliTounes2011]

@@KevincaronSculpture Thank you 🙏 and good luck for the rest.

[@goldengoat1737]

So don’t wear a tie when machining ?

[@KevincaronSculpture]

Tie, long sleeve shirt, long beard, loose tee shirt, anything that might get wound up in the rotating works on a lathe. Great way to lose an arm!

[@kamie993]

helping me with engineering in college 5 and a half years after its posted wow

[@KevincaronSculpture]

Thank you for watching and posting !

[@buscarkov]

Not gonna lie. Laughed at making sparks.

[@KevincaronSculpture]

Thanks for watching and posting.

[@perrymcmasters2730]

Best ending ever!

[@KevincaronSculpture]

***** Thank you,, He may show up in a few more....

[@statingthe_obvious6309]

Kevin Caron, Artist omg how did you get Kermit to do this? superstars don't come cheap

[@KevincaronSculpture]

No comment!

[@Poksutin]

i just bought the same lathe...shame it doesnt have metric threads :)

[@KevincaronSculpture]

I hear ya. That is the one thing I have never figured out on this machine. Have no idea how to turn threads.

[@danielzunigagutierrez6300]

The cross feed slide is not the apron, Mr. The apron is always in front of your best buddy when you are machining. 😊

[@KevincaronSculpture]

You are correct

[@danielzunigagutierrez6300]

@@KevincaronSculpture love you, anyhow, Sr.

[@conleycustomironwork3227]

That was more naval ship lathe

[@Ron_EZ]

Kermit D Frog & Kevin Caron! Could be one in the same? LOL good video

[@KevincaronSculpture]

We will never tell!

[@zandramastrisagion5002]

Kermit at the end sounded like Cliff Clavin!

[@baconcreek609]

👍🏼

[@falman-5653]

haha. your good old man. awesome video

[@Marusija8]

❤❤❤👍🏻👍🏻👍🏻

[@28visions]

Not gonna lie saw a video of some Russian guy getting demolished by one of these so had to look this up lol.

[@KevincaronSculpture]

You do have to respect this machine!

[@magnetshowdotheywork]

@William Acheson I'm doing a pre-apprentice course at tafe for boilermaking and one of the machinist apprentices showed us the video today. Its our 3rd day lmao. Dont watch it, its fucked.

[@magnetshowdotheywork]

​@William Acheson Yeah, my mates and I were in the common room eating our lunch when the Machinists came in, sat with us and we started talking about the risks and rewards of our chosen trades. Conversation got on to safety, hazards and death then one of them pulls out his phone and shows us the vid. Not a good taste in the mouth of someone who hasn't stepped into the workshop yet and has done pure theory thus far ahaha. Okay well I have sort of tried to flush it from my mind, so I can't say for certainty but from what i CAN recall... Dude is working on a lathe, has like a big bomber type jacket on, goes to reach around to turn the machine off and gets sort of absorbed into the machine. In just a few rotations he's dead, after a few seconds he is just a pile of flesh and mince meat. It's really sad.

[@magnetshowdotheywork]

@William Acheson yeah it’s pretty rough. That video you’ve seen pretty much sums up this video, but with a lathe instead. Thank fuck I don’t have to use lathes cause that would have given me mad ptsd ahah I’m glad live leak got shut down, that seems to be where most of these videos were hosted and cause of it’s easily accessibility it was easy to take videos from there and post them on social media sites.

[@magnetshowdotheywork]

@William Acheson Oh yah, I couldn’t speak to the validity of that, but I’m sure it’s true. It’s so low quality that i thought it was old, but I see the comments on this video only started 7 months ago so either was a recent event or TikTok and whatever are slow

[@YourLastSandman]

Thank God someone mentions not wearing gloves

[@KevincaronSculpture]

Oh yeah, just watch a video or two! Scary stuff for sure.

[@sportsAGame]

I had one from world war 2 that my grandpa restored for me it wasn't very safe so I didn't use it he couldn't find a belt so he stapled it together

[@KevincaronSculpture]

The old machine shop were a scary place to work!

[@sportsAGame]

@@KevincaronSculpture ain't that the truth

[@sys6350]

Thank for make this vdo,

[@KevincaronSculpture]

It's my pleasure

[@drumtwo4seven]

THE "RAILS" ARE CALLED THE WAYS THE WAYS

[@KevincaronSculpture]

Sorry, gray hair moment.

[@davidwillard7334]

No it's called the Dick !

[@fathergabrielstokes4706]

I subscribed

[@KevincaronSculpture]

Thank you for watching and posting. I am also on Instagram.