How To Use A Mixer In Your Dj Setup

[@schquitagoodwin7549]

i been DJing for 15 years and he's a million percent right. it's a little intimidating but literal heaven once you get it down.

[@showbiz555]

Dude Thanks a Million. Aside from the quality of sound as a DJ I’ve always been relying on just the controller board and u just taught me a valuable lesson!!!!

[@warrenarmstrong607]

The Architect Of Sound: Yes, it is a sage investment on a product that has been around probably; since, I would say around 1972. There is nomenclature about the mixer that has not been amended all that much in 50 years; so that, it very much intuitive. The pre-amps are very solid and this will last many, many years. Keep up the good work and enjoy your sound quality.

[@DjChaser]

I am thinking about getting a mixer because now iam a up and coming dj and when on social media and sometime my sound will sound so bad and iam thinking about buying a Makie

[@Dranomoly]

Use the 1/4" over the RCA. 1/4" in balanced and less susceptible to outside interference. There is a reason professional controllers (and other sound output) all use 1/4" and XLR - RCA are a good backup.

[@abesickerz]

this was my question. so RCA out the controller to 1/4 to the mixer correct? what about auxilary for phone or ipad? would i need two 1/4" or one 1/4" to connect to phone? i guess it has to do with stereo and mono. sorry im new to mixers, just got a Behringer xenyx 802 and trying to learn lol thanks!

[@bboymac84]

@@abesickerz Its more about distance and Interference. The further away you are from the speaker the more likely you are vulnerable to outside interference. get good wires and you will be fine with RCA's

[@sullycliftona]

What ,,!!'m mmmm about it !?,, Min mim moaning little petti peoplE ,, give me a life paleaszze ... the guys just saying ,, ,, init

[@mr.honesty5115]

I actually have that mixer & do the same with my DDJ 1000. It’s always better to use an external mixer simply because it pushes more sound plus all its capabilities. I purchased 2 actually one to take with me every weekend cuz I’m a mobile Dj & one for my home set up for podcasting. Great purchase & great vid bro. Now clean that garage lol

[@DjTecniq]

The main purpose for an additional mixer is more headroom for audio. The controller has a limiter and will peak fast depending on your setup whether it’s with just powered tops or coupled with subs. The mixer will allow more volume and has a greater preamp for microphones. The mic preamp on most controllers are dog shit. The mixer is useful for better sound quality overall. The SR2 can get really harsh esp if your pushing it past 12 o clock master. I used to have the SR2 now i have the SRT. Much better sound quality imo.

[@mksfank]

My exact comment and i use a traktor s4 mk3

[@O2THEZONE1]

Hey can you let me know how you usually set your levels on yours

[@DJJunior192]

Good video bro but. You should connect 1/4 from your controller to your mixer. Left side on channel one and right side on channel 2. You can use the pan to switch them to left and right on the channel. It’s better then RCA bro trust me.

[@terryriderbell4558]

Hi, why is it better? especially, if I only have the RCA to XLR and no 1/4 (as we speak), what changes with the set up you sugested? whgat do you mean by using the pan to switch? Thanks

[@DjGCue71]

@@terryriderbell4558 it's not better. like the video says "this is just another way of hooking up"

[@BarnE888]

I'll Have to try it

[@longshot4484]

Make a video bro

[@NickBirge]

Came to same the same. When you do that you get true stereo sound. You could achieve the same by plugging your RCA's into separate channels. Xlr and trs 1/4 are both balanced, rca is not, that is why it is better.

[@SuperWorshipguy]

Thanks Barn-E, now i understand how its all connected. I have the Traktor S8 and also have the Yamaha MG 10 XU. Now I can prepare myself better. In Canada they have just announced that full capacity at venues and weddings will be allowed once again after 2 years, this will open up the business again, thanks again for the great video!

[@djjesse1294]

Thanks bro. Can you do a full set up review. I'm interested to see how you set up for a party, including lights. Much appreciated. Thank you.

[@BarnE888]

thats actually a good idea. I'll look into making that video. thanks for watching and your comment.

[@vegaf2011]

Out of the hundreds of videos I watched about this topic you are the only one that I understand and demonstrates step by step how to hook all this stuff up, it’s super confusing but you made it very clear what people need. Would it possible to do one with an audio interface included

[@marcosbabeto]

Nice tips. Thanks a lot. 👍👍

[@ragnardeutsch]

Thank you for sharing...Best Regards from Bogotá - Colombia- South America.

[@allancarter6473]

I agree with another comment use 1/4 inch sounds a lot better. I have always used a mixer as it does get you out of trouble, I have a 2nd laptop set for emergencies. Also means you can connect more than 1 Mic .

[@BarnE888]

yes thats the benefits of a 10 channel mixer.

[@MobilediscowirralCoUk]

Invest in decent rca/xlr cable it does improve signal

[@RazielFallen2991]

Appreciate you bro. I got my first gig in 4 weeks. I was worried I didn’t know what to do. I’m starting with a DDJ400. So there isn’t much too work with

[@atahuallpamejia2698]

Where did you get the controller case??? its awesome!!!!

[@carlos_mann]

Would using an older 4 channel DJ mixer be the same right as an alternative, instead of going out and purchasing another piece of equipment

[@supraman112184]

I have the Mackie Mix 8. for ceremony I run the mic and laptop through it. For reception I only run the mic through it. the controller goes direct to the speakers.

[@BarnE888]

the only reason i started to do it like this was cuz of the example i gave if my laptop shuts down my controller does too because its being powered by my laptop.

[@superdad8274]

Any reason why you would not go out from 1/4 inch vs RCA? Also, why not use the xlr master in the yamaha. Thank you

[@Midou_Maradon]

How ues to a audio interface in your dj setup

[@BarnE888]

i don't own one but i'll look into it. thanks

[@ItsPX]

Can i use a mixer like this one to map an effect on serato dj pro ?

[@essentialtv4822]

Thanks this is the reason I thought I needed a mixer.

[@MrTomb1976]

i knew this would work, but this just reaffirmed for me what i already knew would be a good way to go so i can add some reverb on the mics for karaoke

[@DavidMartinez-ck6jp]

I do agree with your suggestion. I use a mixer and and it does work out best.

[@edwinhernandez6627]

My backup is the Dennon MCX 8000 controller. If my laptop fails , all I do is move the flash drive to the controller and flip a switch, and the party/ dancing keeps going!!!! 😊 🧢🎛🎧🔊🎶🎵🎶🎵🕺💃🕺💃

[@C-Dub1906]

Thanks Brother. I'm a new mobile Dj and have now gotten to the point where I'm looking at getting a line mixer as up until now, I've been connecting directly to my speakers from my controller. I admit I had been been intimidated by the mixers all together. After watching several videos, I'm convinced of the value this would bring to my setup and now zeroing in on what particular mixer I will purchase. Showing how you connect everything was really helpful and I thank you much.

[@BarnE888]

yea no prob. i hope my vid helped with ur decision.

[@yugaldaya4769]

What a coincidence, even I have been using the same set up but my mixer is the mg16xu....... Glad to come across this video.... :)

[@averymcdaniel423]

What is the cable adapter that you're running the phone to the rca cable?

[@izzys-travel]

Hi I have pioneer ddjrev1 controller and just bought Yamaha ag06 mixer but I can’t hear sound to TikTok both left and right green lights are on

[@godjchokedeezy]

I use the same mixer. How would I connect to a bar's external speakers via rca? What would be the process of signal flow?

[@djkilo02]

Does the rca to your phone work connected to the ddj?

[@Yakawan1969]

Hey DJ Barnie I notice you are really familiar with the Norteño Genre can you do a top 20 or top 50 must have songs

[@BarnE888]

i need to update my library first but i will look into making a video like that. thanks for the suggestion.

[@xxceesxx1]

That's a very good seggestion. I have noticed this as well. Specially cumbia norteña you have that for weeks.

[@xxceesxx1]

*suggestion

[@Alpha-ro8sc]

Excellent advice! Always have a backup. Better to have it & not need it than the other way around...

[@robertisabel3668]

Can you use a virtual DJ software with this controller even though it has Serrano?

[@djperez-x9g]

One question, why don´t you connect your speakers to the mixer instead? Thank you

[@leemccoy6318]

What's the wire in the back hooked to???????.

[@robatisan]

Just wandering what year your mac is?

[@djpalos81]

What happens when you plug your mixers USB straight to your laptop?

[@BarnE888]

i don't know i haven't tried it.

[@djchikilin2956]

I have exactly the same set up, including the same dj controller case. When you plug in your mixer to your computer via usb, you have a dedicated channel on your mixxer that controls your over all sounds of your computer. This comes more in handy when you use the mixer to mix digitally on different applications, such as garage band and such. Its basically an external sound card. I used it a lot to record podcast. This mixer is very nice and it enhances your outputs.

[@snkafrica3916]

What song was that you were playing too at 1:47?

[@gerardocantu3646]

Any suggestions how to hook up my harbinger v2318 n 4115 to aharbinger mixer n numark mixer

[@henrybronxx_bomber3514]

Very informative video.. So by using your mixer there is no need for an amplifier?

[@RamboVibez]

If you’re using powered speakers no, amps are built in, unless you’re using passive (non powered speakers).

[@gabrielrosas5173]

Nice video bro! I gotta get me one of those Yamaha mixers

[@BarnE888]

thank you. yea look into it.

[@victornaja7927]

one main out on my mixer doesnt work can i use a Y spitter and put both channels from amp to one of the mixer outputs.????

[@sk8tb1]

What’s the difference between the 2 channel mixer in the dj vs the 8 channel mixer on the phone. Can you just use the yamaha instead

[@EnriquedAnguiano]

Is the mixer being power on its own ac outlet? Sorry for the ignorance

[@jonathongalvan5131]

I connected mine the same way like u do

[@banditt18]

i have a 6 channel pevey mixer and im just starting out was wondering if that would work or does the mixer need to have built in amp or not?

[@anthonydanielson5526]

Which make of phone are you using i have a samsung and bought a lead to do that but it didnt work so what else will i need

[@williamrivera1582]

I have the sb3 can I still hook up a mixer to it all it has is stereo out

[@williamrivera1582]

Do you have the usb connected To the mixer

[@blackkrownempire2995]

Can u hook up mics to that rig?

[@bigserge07]

Great set up and video. 😊

[@Johnnybang916_]

I’ve been thinking about this for a while now....thank you so much!!

[@perrywebster5234]

Can you play your controller without the soft wear

[@DjMarkyBatch]

So do mixers never crash? Or break?

[@just_shel5608]

Great video...I have a question how do you hook up a powered subwoofer to the mixer..??

[@djchikilin2956]

Used the main outputs to connect to the subwoofers. From your subwoofer, use your output to connect to your mids. It's basically a chain you can keep going for as long as you possibly can lol

[@SuAmigoElilegal]

Hello please. I have 2 new power speakers that I want to add to my already set up dj, which is 2 subs and 2 load speakers. Now ,I do not want to plug them to the monitor input. I want them on the same left and right main output so I can have more power and same fader control of all. How do I connected them

[@coolacadien]

I haven’t any videos yet who shows how to connect multiple amplifier to the mixer or the interface

[@redpromediat.o.tstrongteam1679]

Thank you bro. Asante sana.

[@BarnE888]

no problem

[@carlosavalos4112]

Good video, can you do a video of how you use it? Like, how do you control the volume? Through the controller or mixer?

[@BarnE888]

ok i'll make sure to do a video about all that. thanks

[@djchikilin2956]

I have the same exact setup and i personally set my mixxer volume to my desire level and i use my controller to adjust volume depending on what you're playing. Not all songs have the same quality and volume.

[@overianlawrence3352]

How many speakers can you connect to it

[@LP00151987]

Hi Dj Barney can u please show me if u use sr or mixer in auido settings in laptop ty

[@Veross4cs]

Question: Do you need ACTIVE speakers for Yamaha MG10xu to work properly?

[@choirboy19801]

Yo no updates

[@loversoul90]

how do you use usb mixer mode?on djing?

[@BarnE888]

I'm not so sure about that. since i don't do it through the usb.

[@djchikilin2956]

Its basically useless for djn. Think of the usb option as a sound card to use in applications such as garage band and other recording applications. For djn, it really doesnt do much.

[@nickybjammin7629]

Can I run the pioneer dj through my peavey XR-mixer amp ( head unit)? It’s what I would sing through in a band. I want to amplify the sound through loud speakers for the affordable, pioneer beginners DJ set up . But the little speakers that are compatible with it will not hang with my guitar metal electric guitar ⚡️

[@MegaRiccs]

Awesome Video Brother I enjoyed your Presentation being a up and coming DJ myself

[@alessandroraisaro165]

I have a Ddj flx4 working with rekordbox, do I need to buy a mixer compatible with rekordbox (pioneer) or can I connect any mixer to the consolle and still use Rekorbox?

[@daly7258]

Stopped watching when i seen the rca cables

[@Troopez4]

lol

[@stantonio4614]

Explain

[@daly7258]

If i need to explain you need to go back to basics of how audio signals works

[@sigsauer9246]

Rca is the worst cable you can use. He went from 1/4” to rca🤦‍♂️🤦‍♂️🤦‍♂️

[@DjSmoothNY]

Most high end controllers have 24bit 32 float so the need for a mixer seems redundant. I personally don’t use a mixer in addition to a mixer. But I use a Rane 72MK2 so pls make it make sense going from a controller into an external mixer then off to powered speakers. I see this more often than not out in the field.

[@naturesoundvibrations9252]

Hey brother, How do you set a microphone up with your DJ equipment / mixer.

[@djchikilin2956]

Very easy actually. I have exactly the same set up. I just plug in my microphone to channel one on my mixxer (not my dj controller), and it has a compressor that makes it sound extra nice. Try it out.

[@josephelibert2464]

Let’s say I don’t have powered speakers.....how would I connect my amp to this mixer???? The same way you connect the powered speakers ?

[@Beluel]

Joseph Elibert yes

[@BarnE888]

yea basically.

[@ramnamdeo2060]

Great video, thanks! Just wondering if I can setup without a controller? I plan to karaoke with youtube tracks. Also plan to play dance songs in between karaokes.

[@hbrookes]

You can, just a lot of mouse work.

[@robertisabel3668]

Using the same process; how could I connect a sub.

[@wolfstriker3992]

how is the sound Quality for outdoor venue Im looking into getting this mixer since Im djing more for community events at my work and I have a Pair of RadioShack 15" PA speakers with Max power of 300W

[@JFL2Kx]

Can you just have the rca from controller go to mixer then mixer to speakers. What’s the purpose of the 1/4 from the controller to the mixer if you have RCA from controller to mixer

[@DJChi_BoccheDiLupo]

If you go in form rca to your mixer, and then outt from the mixer to your speakers, the signal of your audio will cange from unbalanced to balanced, and that's much better for different reasons.

[@djbigshay]

Does this improve the quality of the sound? As opposed to going straight from the mixer/controller to the speaker?

[@johnpascasio8541]

As previously stated in another comment. It boosts the headroom giving you higher output or louder sound.

[@temitopeodus3174]

How can I do microphone recording on my serato dj pro with my Sb3 controller ..is it possible ?

[@jessiesanchez432]

I have a question, what do you guys use for music. For example I use tidal for music, but sometimes I can’t use it on my laptop all the time. I need a hot spot. To help with internet.

[@xxceesxx1]

How about a wireless mic set added to all that ? 🤔

[@BarnE888]

thats actually a good idea. i think i'ma do a full set up video.

[@hbrookes]

Whats the song at 4.40?

[@josecarrillo735]

Good video man. What type of aux cable were you using? Ive had bad experiences with the past couple that i have bought

[@Itsdjdavo]

This ^

[@BarnE888]

to be honest i don't know the brand name.

[@Drum4Chops88]

Nice video by the way I have a yamaha mg10xu mixer I plugged into channels 3/4 and it was peaking and distorting should I have plugged it in 5/6 UNBALANCED channels or what can you tell me what to do ?

[@henrysanchez1347]

hi i like the idea of the mixer . can I hook up and amplifier basically i have the same laptop / controller but no power speakers just passive i would have to add an amp would you know how to do this?

[@choirboy19801]

No updates on your Dj speaker

[@vinniemcgheesr.5294]

Thanks for the info 👍🏾 I'm going to do this

[@princeyarlin]

I have the Yamaha mixer but i have the pioneer sb3.

[@dj_jake]

Thanks that was very helpful

[@djcook5854]

Why are using RCAs from Your Controller to Your Mixer??

[@bernercalito8422]

Can you live stream your dj set ?

[@BarnE888]

i actually went live a couple of times on my IG. all my social medias are in the info section of all my vids.

[@albertloyola7535]

Hey Barney i bought DDJ SB3 and used dual rca male to 1/4 in male to connect to my sony xp 700 speaker (only input/output) I am getting a lot of choppy sound lately, i changed the cables multiple times and the problems persist. I do not know if the problem is my SB3 controller or Tidal (where i pull my music from) or the speaker (its brand-new and works very well when i connect from iphone via Bluetooth) which integrates with Serato. Any guidance would be appreciate it

[@javierlagos5968]

Saludos en colombia, tengo una ddj 400 y quiero comprar el mg10xu me parece buen mixer.

[@BarnE888]

buen mixer por el precio

[@pinkpanta72]

question for you as a novice; where do you set your level controls on your controller when you sdend your sound to the mixer? are all of your dials at 12 o'clock? and is your master volume on your controller at max? and is it possible to use xlr left and right and placing them in input 1 and 2 of the yamaha mixer?

[@BarnE888]

I usually have all my dials at 12 on the mixer. i control mostly everything on my on my controller cuz it makes it easier for me than to b looking over to the mixer if i have to adjust something. i can tell u how i connect everything n all my setting but if u dont have the same exact equipment as i do it wont b the same. so just try different things and see what works for you

[@concretejungle6938]

@@BarnE888 Aye Barney what is the other end of the Grey RCA cable you unplugged & put in the mixer...What is that connected to?And do you use the USB on the mixer for Serato?

[@user-qn5mc6vp5d]

Bro I bought a whole DJ mixer with turn tables and Bluetooth all that, but I can't figure out how to scratch and mix when I connect Bluetooth

[@SKRecipes]

Hi brother, thanks for helpful video, I get a question. What cable you use to connect mixer to your phone,

[@Anonymous-qk9dg]

Bro go to any random mobile repair shop and ask for a sound cable . Actually I don't remember the name 😟. It will take almost 30-50 Rs

[@djchikilin2956]

A regular rca to headphone jack cable will do the job just fine. Buy one at Walmart for about 8 buks.

[@ismaelpizzariano]

My Yamaha doesn’t have rca how can I connect?

[@Hoobel]

If your controller is only powered by USB (pioneer dj 400) from the laptop.. Will the mixer get enough power?

[@concretejungle6938]

Can someone tell me what is the Grey RCA Cable that he unplugged & put in the mixer...What is the other end plugged into???

[@judekraft8104]

NS7 has aux for phone to save urass

[@MrLittlegrant]

so could I use this mixer to connect two controllers to the same set of speakers via the mixer so all channels come out the speakers?

[@djchikilin2956]

Yes. That is the main point of a MIXXER; to mix different inputs and control your output level all in one place.