How To Use a Pouch Laminator

[@dippratiktripathy1942]

Very very Informative 👌 👌 👌 Thank you so much....

[@nousratbibijouman3181]

Hello Thanks Btw instead of the laminating pouch, can i use the plastic we use for binding paper?

[@nousratbibijouman3181]

@@newbie_gaemer4946 thnx dr. I have the laminating pouch, both A3 n A4

[@KevinMarshall-vk4sp]

EASY TO USE EVEN FOR BEGINNERS

[@MajorHeck75]

this is fascinating. Thank you so much.

[@aimervinch]

I laminate a picture but it didn't come out in the laminator and its smoking. I need help to get out the picture inside the laminator

[@christopheryuda4029]

good

[@احمدعدلى-ط4ف]

how to close this laminator . power ?

[@احمدعدلى-ط4ف]

how to close and shut down the motor before shut down power?

[@amadomateriano5251]

How much

[@احمدعدلى-ط4ف]

what degree tempurter for 6 speed ?

[@vidalrojas5584]

Hola soy un cliente donde venden los repuestos porfavor

[@mattatbat96]

Mine says "Carrier Required" what does this mean?

[@intradaytipsbyrahul]

A fellow has spoiled my document After laminate,now it seems hurdle(speed breaker) How to clear that....

[@trwent]

"Today's question: How to use a laminator." Except that is NOT a question.

[@cookiecooly]

Do holograms get removed when laminating a holographic poster?

[@mybinding]

Generally you can laminate holographic posters and it will not be a problem. That being said, there is still a chance that the one you have is heat sensitive, which could cause issues. Check to see if you are using a heat sensitive hologram material--otherwise it should be safe. You may be able to also go to a Fedex/Kinkos to test one of your posters if you don't have access to your own laminator yet. If you then decide you need your own laminator or materials then check out our website(we have tons of videos if you need help too): www.mybinding.com/laminating/laminators.html

[@cookiecooly]

Thanks for the reply!

[@draxtheliteralist1107]

I laminated a piece of paper, it was all the right settings but it came out wavy, it wasnt too hot because it was JUST turned on and the ready light JUST turned green. help?

[@mybinding]

+Nikko99 It may be worth it to try turning down the heat anyways, even if it should be correct. Also make sure that the thickness of pouch is correct for the heat. One thing you could try(if you aren't already) is to use a carrier at the same temperature. We recommend using a carrier for all projects if your machine supports them anyways. A wavy page usually means it's just too hot, so play around with turning the temperature down. If the ready light turns green it is at full temperature for the setting, which means your setting is probably too hot for some reason.

[@draxtheliteralist1107]

MyBinding.com unfortunatly I dont have a laminator with a heat setting..... just the 3mm and 5mm setting

[@mybinding]

If it is wavy, then using a carrier may help still because it will lessen the amount of heat on the pouch(and keep your machine cleaner). Set it to the 3 mil setting, and if anything, you can also try different pouches; it could be the quality of the pouches or the machine. I wish there was an easy answer...I hope this has helped you though. If you have more questions you can also talk to our customer service: 1-800-944-4573

[@klokkost8387]

thx

[@Starmanfansunofficial]

❤️❤️❤️

[@vidalrojas5584]

El rodillo de precion el rojo

[@waliwali7337]

i need one

[@mybinding]

Do you have any specific needs? Here is a link to our pouch laminators: www.mybinding.com/laminating/laminators/pouch-laminators.html. And feel free to call our customer service(or use the live chat) and they can help you choose what is best for your application. I hope this is helpful!

[@BettyMembrado]

Hd asimble 12 isa isa ikabit

[@sootylum]

"Creased end" means what sorry?

[@mybinding]

There is one end that connects the two sides of lamination together. It is that end that we are referring to. All lamination has a lamination sheet for the front and the back, using the two to seal your page in. With lamination pouches, one end is already sealed so all you have to do is insert your page and laminate. Again, this pre-sealed spot is the "creased end."

[@user-ol6ur6cd2k]

i was thinking the same, wtf is creased side 1st....

[@mdkashem210]

দাম কত হবে

[@dancorwin9232]

"leminator"

[@mystudylaboratory7346]

not helpful