how to use AMS1117

learn how to use AMS1117, how to implement it in any circuit, and basic facts behind this little linear voltage regulator.
AMS1117 product link: www.utsource.n...
Get the parts from our online store: bit.ly/2VSDy1I
Know more about Utsource: bit.ly/3en0Oua
Subscribe to Utsource channel: bit.ly/2ylkvlK
Contact us:Email: [e-mail]
Follow us:
Facebook: bit.ly/3a56A0c
Twitter: bit.ly/2XP25EJ
LinkedIn: bit.ly/2VdfPr0
ВКонтакте: bit.ly/2XH3zk5
Instagram: bit.ly/2JBPwHe
Pinterest: bit.ly/2Vdyp29
#AMS1117 #utsource

[@KowalDrzo]

Good video, but I wanted to see some more advanced tests :) like for example: - output voltage with some small resistance (to see if the voltage will remain the same), - built in reverse polarity protection test, - voltage dropout test, - built in short circuit protection test.

[@gouthamkumar1750]

AMS Regulator comes in many variants to begin with Fixed and Variable (1.5v,1.8v,2.5v,etc)

[@ClownWhisper]

If you want to help the new guy show him the new schematic and then draw the actual wiring diagram he stepped by self point to point wiring diagram and then show the difference between the schematic layout or the pinout layout and how it actually gets wired that would help the new guy immensely

[@marcus3d]

How do I choose the resistor and capacitor values depending on my use?

[@StevenBedoya2]

Bro, just check the regulator's datasheet to know what are the typical configurations and recommendations from the manufacturer about additional capacitor values.

[@marcus3d]

@@StevenBedoya2 Bro, of course I could do that, but the whole point of the video was how to use something, so having to look up how to use it makes the video a bit pointless.. 🤦‍♂️

[@ipadize]

for anyone searching for this component on Mouser: search for 1117-3.3 or 1117-5

[@marphxxl]

All Sources and datasheets don't tell something about that resistor. Why did you use it and what did this resistor do? Only for 1117-adj or the use of two simultaneous 1117 with two powersupplies use a resistor. I think the resistor is wrong. What is your opinion?

[@ClownWhisper]

I honestly don't see why people say this is a good video it doesn't show you anything. It doesn't show you the proper pinout you were soldering to hidden traces they could be going to any of those pins on the bottom of the board. You can guess that you're going left to right from one to three but it will just be a gas for people that have never done this before schematics are useless they don't really tell you how to wire anything unless you really understand even the simple schematics like this for example the pin outs are not left to right as a wiring diagram would indicate the shift around 1 pin counterclockwise to the left so anybody that would follow this as if it was the actual component would not be wiring it correctly this is what makes me angry at people that are posting these videos for new I'm experienced people that are trying to learn electronics they will get it wrong almost every time.

[@rosskrt]

At least we can comprehend what he’s saying. Someone can’t even manage to do that.

[@StAlKeRsification]

Can i maje it output 150ma 3.3 v by tuning resistance

[@RobertPaar]

Nice video men, but you just check the tension with the multimeter, you are not powering anything

[@samuelsungstabtu7527]

AMS1117 have 9V, 12V and variable output flavor as well now i think

[@SarangS-bw5rl]

What is voltage of capacitors required?

[@s.husain6125]

Make battery protection ic video sir with ip5306 charging ic

[@vivekshukla5753]

Can we change the value of resistance to get an output of 3 volts? How much?

[@KowalDrzo]

Not in 3.3v or 5v version... You have to find ams1117-adj which is adjustable by two additional resistors

[@ArnovSharma]

Tinker the value of Resistance on ground

[@paramcanada7552]

Bro i am not going to mount this or use it permanently but i wanna make a supply which i can use to test some modules in that case i need to ptotect its output from short circuit. Do you know how to add protection to its output

[@joshuvajohnvarghese2372]

Use a MOSFET

[@lprkon72]

I'm new to electronics and have no teacher I'm using 8v power source and 3.3v lm1117 I have 100u electrolytic cap on input and 10u electrolytic cap on output is this ok?

[@davidkomdeur]

Only if you use small currents

[@akashsharma9264]

Great video... But it would have been awesome if you have shared the schematics for the circuit... Although you shared but that was not clear... Anyhow great work keep it up

[@parthiv8167]

how much current will ams1117 ic consumes in a circuit

[@johnvine5731]

MUSIC!!!

[@roystevens4333]

What's with the resistor? What ceramic capacitor are you using that meets the ESR requirements of your output capacitor? Where's the schematic? This is such a confusing video. You must have spent hours on that movement montage and zero minutes actually explaining the regulator.

[@maiskazimov4717]

Mama mne skazala ucis Anqliskovo yazika ,a ya tupil ,mne ocen jal nado bilo ucit

[@manishholla]

Please don't use that no signal video transition. It's very irritating