This is the BEST tutorial on KZbin for the DSC. I have an older model but your tutorial was spot on!
@brendacampbell2495 жыл бұрын
This was so useful! Thank you for easy, concise and pretty thorough instructions.
@juniormirandasegura3031 Жыл бұрын
🇮🇱
@vwcentral82162 жыл бұрын
Hi, Please can you advise if you can have the wireless display to stay on at all times.
@Rossie28073 жыл бұрын
Do you know how to replace battery as it appears a warning to replace it
@andymurphy84313 жыл бұрын
What if your system keeps beeping every minute even though there are no doors open? It shows the yellow triangle but there aren’t doors open
@royochola Жыл бұрын
Good demonstration
@swhli Жыл бұрын
Is there a way to sound the alarm immediately if the door is open in Stay mode? Mine has a delay in both the Stay and Away modes :( Thanks
@dijee10006 жыл бұрын
Yes, thanks! Very helpful!
@oregonbeaverguy3 жыл бұрын
How did you turn the light off? Mine is in the bedroom and I'd like to turn it off.
@alexanderippolito5408 Жыл бұрын
Hello How do you adjust the brightness of the keypad? It does not save when I attempt to adjust the luminosity
@thefiqster Жыл бұрын
All I have to say is ADC. But great tutorial !
@MikeDiCiero Жыл бұрын
how do I program the alarm to activate on and off at the same time everyday ?
@_life_of_jodie_2 жыл бұрын
Hi. i am trying to find the integration identification number so i can use the app, would you have an idea of how to find this. Thank you!
@gcondel3 жыл бұрын
Can you tell me how to use system that doesn’t have the visible commands at top . Pleas help
@fareedachinaleong91423 ай бұрын
How to make an alarm sound while you are in? Like if you see something unusual outside
@richardproffitt60566 жыл бұрын
How do you add or replace a window sensor that has went bad? So it is now assigned to a specific zone.
@cwgaines5 жыл бұрын
*8 installer code, 804, then whatever zone it is =003, you see the serial number of the device, look on your new device for the serial number start out with 00 then the serial number. the new device is enrolled. That is for window or door sensors only.
@JMiller3 жыл бұрын
@@cwgaines You just remove the old sensor and put a new one in. If it is wireless, then there is much more to it. Please follow the sensors directions.
@oregonbeaverguy3 жыл бұрын
My exterir foor is warped and is not aligning with the sensor. So it is locked but showing the yellow trouble light. So I bypassed the zone, but I get a beep and have to keep *2 to bypass but I want to delete the enti8re zone so I can quit the annoying beep from waking me up all night.
@mahirmarji77843 жыл бұрын
Can you tell me how to change the door beeb tone?
@reneroman14216 жыл бұрын
Hi ... I have a DSC system Alexor PC9155 with a WT5500 keyboard. I'm having problems with the WT5500 keyboard and I want to replace it with a new one. I would like you to help me erase the bad keyboard from the program and enroll the new one so that everything remains the same as before. How could you help with my problem ..... Thanks
@bobliuca6 жыл бұрын
Thanks for the Tutuorial!
@mikeyboston72955 жыл бұрын
Thank you
@chrisorr40874 жыл бұрын
Bought a house with this security system, previous owner didn't provide a code. Tried to use master code which is provided in the book but wouldn't work.
@brianconcepcion39864 жыл бұрын
Hi, I have the same problem
@ZoeBredan4 жыл бұрын
I do too,it wont even come on
@mkh0lt4 жыл бұрын
I'm renting a house. Alarm is supposed to be off. They left no codes or information. Today the alarm is blaring and I have yet to find a way to turn it off!! We're going crazy!! How do I turn this whole thing off??
@chrisorr40874 жыл бұрын
@@mkh0lt remove the wires in the dsc panel, its on the far left a/c power.
@JMiller3 жыл бұрын
@@mkh0lt Unplug battery and the alarms power supply.
@johnhewetson44064 жыл бұрын
Can anyone explain to me what (071) First User Display Mask and (072) Second User Display Mask do?
@moayad19765 жыл бұрын
Does Neo power series keypad works with power servers panels like 1616 for example,
@JMiller3 жыл бұрын
No. Neo keypads do not work with power series panels.
@wcholtzen2 жыл бұрын
The ONE thing I wanted to see was how to turn off the keypad light! Anyone know how????
@kennleymanalo85503 жыл бұрын
Please help me how to rename zone label
@deletedelete-v7fАй бұрын
What is the installer code
@junespadafora81653 жыл бұрын
what if I don't know the master code
@JMiller3 жыл бұрын
You can reset the master code but you will need the installer code.
@SureshKumar-nu5cg5 жыл бұрын
How to add wired glass braker detector
@JMiller3 жыл бұрын
The detector will come with direction on how to do that.