How To Use Keyboard And Mouse With CEMU - Working 2023

[@shelbay6479]

I just wanted to play some BOTW and ended up here, noo... What a nightmare setting up these controlers Nice video btw

[@Swashed_]

Yeah it’s a pain to get it set up. Thanks

[@АннаИзвекова-г4ц]

I spent 2 hours trying to figure out why other method don't work at all, so i ended up here now... if it doesn't work, i truly live in a nightmare :(

[@alenietouh4789]

thanks to this guide I just connected a controller, thanks

[@ejotaeme3053]

HAHAHAHAHAHAHAHAHAHA

[@Pnatyy]

LMFAO "cheap controller incase you give up"

[@ebinjayan]

1:38 my cemu doesnt have the plus icon next to the controller option what should i do

[@davidsu8327]

If the mouse clicks dont work for you, you gotta set all of the buttons up first including the mouse 3 and 4 buttons. X and Y resistance at 1 and input delay at 15 works best for me too.

[@Rodyx9]

What do you mean by that. It's all set up well when using the keyboard

[@johnjohnson1330]

Followed exactly what he did but when I enter the game not a single button works to press "continue/start game". I can see that the Mouse2Joystick is working because stuff like "hide cursor" works. The only button that works is when I hold Tab and it says Tap here to play on the Wii u game pad only. I remember with vJoy you had to press F1 to actually get the keyboard to work for example. Any ideas? Thanks.

[@Burref]

@@johnjohnson1330 You need to map the keys for the keyboard, in example make A --> 1 and your 1 button would be the key that u need to press at the continue/start game

[@johnjohnson1330]

@@Burref Wow ok, I thought since all the keys got filled out with some default letters/numbers that was it. I'm just using vJoy now instead though, seems to basically be the same. Ty

[@richardsaba3537]

hey, i know its been a while but how did you get yours to work? I have the exact same problem and would really like to know, thanks@@johnjohnson1330

[@Noyou3129]

I need help badly. I've done everything stated above plus I successfully started USB helper and such. I'm running into trouble when configuring the XInput. I've done everything else, and yet whenever I press the "Controller" button after selecting XInput as my API, nothing pops up. I asked several AIs and checked a bunch of Cemu and Reddit posts, and nothing is working. Please help.

[@leotx242]

I have the same problem right now

[@lunamoth105]

idk why for me the mouse app doesn't do anything at all update: nothing works even tho i installed everything corectly, no matter what button i click nothing works, wasd? doesn't work, mouse movement? also doesn't work, cemu doesn't react to anything, i didn't tried controler yet tho, i literaly did EXCACLY like how you did but for you it worked while for me for no reason didn't

[@maxulic]

3:12 I am a bit confused here, I have Lock in Center checked does that me that if I keep scrolling to the right for instance, the camera will go full circle around the character? Because that's not the case, the camera quickly reaches the max that it can turn, it is even worse when I want to look up.

[@missqueen20_]

uncheck "lock the cursor"

[@adrians20]

Great tutorial, it worked. Thank you!

[@levicroker5531]

I'm really liking this app so far. I love that it also works for other games and apps also. It's like a virtual alternative to not having a gamepad. My only gripe is that you can't configure the right stick. I rate it 9/10

[@brandonramsaran8312]

Hey not sure if you'll see this comment but even though you've heard it alot from this video , i just wanted to personally thank you for the time and effort you put into the video not to mention posting it you helped me and others hope you understand where im coming from have a great day Swashed

[@Toots_McPoopins]

Thank you very much for this tutorial! Was trying to get my Steam Controller working on this, but gave up and then realized I'd rather have mouse and keyboard anyway. Convoluted setup for sure, but you helped a bunch!

[@iamvulgar8188]

All you'd have to do to get your steam controller working is add Cemu to steam as a non-steam game and then configure your controller through Steam Input.

[@tanjironotasimp8310]

Does anybody knows how to make the mouse rotation stronger? i made the Y and X resistance on 1 in its still not enough...

[@Sebiven]

You could try enabling camera sensitivity in graphic packs -> Mods

[@eugeneshakovets7390]

Works flawlessly in cemu 1.26.2f but in cemu 2.0 the camera is going wild when bound to a mouse. You move the mouse a bit and camera goes flying around the character. Massive overswings. Pretty much unplayable. I guess devs re-wrote the input or smth. Oh well.

[@ebinjayan]

the mouse2joystick thing is just not working for me :(

[@politebonsai1323]

ViGEmBus installs normally except for the part where it shows up in device manager, when i go to cemu for inputs in the "+" below "api" for "controllers" no devices show up. I dont know if it has to do with having a wired mouse or not but its not downloading at all. I had a similar issue with "Vjoy" but the driver would not install as well. Edit: I have found the file at the bottom of my "Program Files" but not in a folder and it also does not show up in device manager despite installing it and having it up to date on firmware

[@4NSK1theReal]

Yo, when i Run Mouse2Joystick thing My Microsoft Defender turns on and Stops it because the Application wanted some weird access, it was a red kinda Box, am i cooked or what

[@4NSK1theReal]

@Cae17617 ☠️😭😭

[@elmagikarpmamadisimo9774]

I tried using the Mouse2Joystick but it doesn't seem to open. Anyone know how to fix it?

[@HeadsUpTV]

Same problem here

[@InFrontEntry]

1 year late, but download and use the installer shown at the start of the video.

[@ZceanJerome]

i know this was long ago i did everything step by step like literally but when i enter the game nothing works on my keyboard like you can press every button and nothing works

[@16-BitKiddo]

Hello. Thanks for the guide, it's working perfectly. But I must ask, the camera movement sensitivity it's better using the controler? With the mouse it's not smoth and I have a little dificulty to aim with it.

[@m80playz18]

Turn your mouse sensitivity down a bit

[@m80playz18]

There is a dps plugin and most gaming mouse’s support dps changes with fire key

[@justarandomdude3102]

"cheap usb controller in case you give up" *first controller that pops up is the one they used for the titanic sub* lmaoo

[@Street_Hawk]

Does this method support gyro controls? If so, how to use them, specifically for shrine puzzles?

[@sageofthelight2759]

The mouse seems to work but the keyboard button input seems to only work on few games?? works on botw and mario tennis ultrasmash but every other game Ive tested just has no respons to anything. I did everything in the video without a hitch.

[@jackplayz5552]

controller 1 isn’t there?

[@angrykenni3642]

how did you get options other than A, B, or None in the little Mouse2Joystick program? I have no options to add X, L1, or L2

[@rene_mxo]

Scroll down..

[@xtealz1993]

i dont see the controller 1 option after hitting the +, also i am unable to run mouse2joystick as admin as it will say windows protected my pc. i get no option tu run it anyway... can someone help?

[@svetiteram737]

*HELP* My mouse only works in game whan I tab out of it or click on any other thing that is not the running game.

[@cheesplus]

mouse 2 joystick not opening for me is there any fixes for it ?

[@Erwayni]

Just run the mouse2joystick as an administrator

[@pavansaik6939]

thankyou for the short and straight to the point video but i'm facing an issue when i set 'lock in cursor' and 'lock in center', the joystick is stuck at the right bottom side I'm unable to move it from that position, does anyone know how to solve this

[@TanerJD]

When I try to open the exe file it just closes after like 2-5 seconds without displaying anything, so there´s just a window popping up, (small and completely white) closing again and there´s no sign of the program running in Task manager. I deleted every file (those 2 files and the original zip file) related to that and redownloaded it multiple times but it still doesn´t work

[@Swashed_]

For which program?

[@TanerJD]

@@Swashed_ for cemu.

[@athina1008]

Mouse2Joystick.exe same for mr. It close not work

[@darkange911]

same here

[@sinyolotzzz]

@@Swashed_ for mouse2joystick i experienced the same thing.. opening as administrator, only showing up blank window screen and the program closed off after 4-5 seconds

[@perfCloud]

thank you it is working. but i have a problem the mouse is very slow. No matter how much I increase the settings, the problem persists. What can I do?

[@Saul_Goodman_official]

i haven't set it up yet but you can increase your dpi

[@YousefMohamedAbdulMoniem]

use a controller

[@Saul_Goodman_official]

@@YousefMohamedAbdulMoniem thats not the fucking issue 💀 why are you on a vid about k+m if you just wanna use controller 😭💀

[@thebg1]

Similar issue. On initial launch, toggling options in Mouse2Joystock changes the behavior of the mouse. However, the keyboard doesn't do anything. Tried re-installing the device and Mouse2Joystick but same behavior. Opening up the Cemu input settings, it still reverts to an XInput default any time I close the input settings window. I also tried using the "-" button in the settings to remove the controllers, changed the profile to a new name with the controller disabled, then adding Xinput followed by Keyboard, but this kept reverting to Xinput as the default.

[@kikosawa]

sounds like you didn't run M2J as admin

[@cyberwolf7848]

@@kikosawa thanks this really helped. :)

[@kikosawa]

@@cyberwolf7848 no probs

[@yamilramirez3323]

@@kikosawa hi bro I have the same problem every time I change Xinput to keyboard and close the sale it returns to Xinpunt I have tried everything and nothing works I would like to know what to do run M2J as admin and nothing works plz help :(

[@kikosawa]

@@yamilramirez3323 if it's connected to Cema, just google a video guide and follow it. can't say more than that

[@johnjohnson1330]

Hey man, followed exactly what you did but when I enter the game not a single button works to press "continue". I can see that the Mouse2Joystick is working because stuff like "hide cursor" works. The only button that works is when I hold Tab and it says Tap here to play on the Wii u game pad only. Any ideas? Thanks.

[@mahmodana3577]

Yes you keyboard is lock press F1 to unlock/lock your keyboard in the game

[@lunamoth105]

@@mahmodana3577 this also doesn't work...

[@mahmodana3577]

@@lunamoth105 it dose but a highly recommended an Xbox control the game is unplayable with keyboard

[@arikakate4872]

@@lunamoth105 same issue found a fix yet?

[@vzvdm]

@@arikakate4872 I found you have to make a change to the keyboard layout under input settings, switch back to controller 1 [xinput] then those keybinds should work

[@Aflyonthemoon]

it may not be clear, I am writing through a translator. But when selecting the XInput API, controller 1 does not appear, there is nothing there at all, is this a bug or something like that?

[@bigmakers9417]

hi i have the problem wondering if you figured it out?

[@lordbobby198]

I'm getting bsod because of the vig file. I have already erased it from my laptop but i still got it some mins ago. What to do

[@rugvedkarande1889]

im not getting the + button and it did not set the keys itself i tried doing it and no matter how i move the mouse the camera keeps circling Zelda's head

[@InterestingThings420]

my cemu dont have "-" and "+" options Help;(

[@ulrikwener]

Check Cemu for updates. Then try again.

[@yxz6393]

@@ulrikwener Was worried about the same thing, thanks for the tip man

[@nakajimashizuo2920]

After API then clicking controller, I cannot see controller 1 like it does not appear to me. how do I fix this?

[@ГалинГанчев-ф8у]

when i click te plus 1 time API Xinput but i cant select controller 1

[@sunski.9202-u9y]

I as well. Let me know if you figure it out

[@danielfoote7366]

I was playing it yesterday on mouse and keyboard and everything was fine, but I open it up today with everything the same, my left mouse button doesn’t work again and I can’t attack, please help

[@Arkhell20]

keyboard still doesnt work after mapping, always defaults to Controller 1

[@mikeherman7510]

I can get to the add xinput but it wont give ma an option to add controllers... any help!

[@miakiikazu]

emulating splatoon 1 and the controls arent working for keyboard and mouse help :( like no buttons do anything even after setting up everything shown as in the video

[@distanakpesawaran4132]

my cemu doesnt have + keyboard option after the controller 1. what should i do? thx

[@tyureen958]

update it

[@rugvedkarande1889]

i have the same issue and its updated what did u do

[@ryandoherty9696]

I can't get the sensitivity of my mouse to be high enough to be playable. No matter what X and Y resistance I set, and I can't make it negative, my mouse doesn't move enough in game. It's impossible to play and I'm not sure how to fix it.

[@АннаИзвекова-г4ц]

uhm, what shoud i do if it works but every time i use mouse it shows big sign that it's controlled with wii u game pad and when i click keys it says that i use pro controller??? these signs are gaint, very distracting

[@Ramms95]

help sir, when i mannualy set up my input setting on keyboard or mouse how to stop giving input?

[@cosmoinstant]

I have xbox controller and can't complete the same shrine you are in, because it requires motion controls. Keyboard mapping seemed to work but I can't figure out how to use mouse to move that spike pad or anything that requires motion controls. how did you complete that shrine?

[@soulmaster7777]

use your mouse.

[@spencesir]

does anyone have any binds they'd recommend? this would be a huge thanks

[@Multiverso_Music]

Amazing dude!

[@Drippy07]

It worked but i kept mouse drift at 1 and still its slow, any suggestions?

[@boom-v9m]

my mouse is working but keyboard not when ı change A key to C its working but ı did deleted controller 1 and reuploaded but nothing changed pls help

[@Fvnctional]

Hi there - having an issue with this. KB&M input is working, but the cursor is still visible on-screen, and the borders of the window are preventing me from turning fully. The 'hide cursor' and 'lock in center' checkboxes are not working I think. Do you have any ideas?

[@Swashed_]

I found those option DO work but not always. I think it might need a few attempts :/

[@Cezzalclips]

I had this problem to. Anything to solve it yet?

[@Fvnctional]

@@Cezzalclips I did what was suggested, changing it a lot. Also, when you're tabbing back INTO CEMU, don't use Alt-Tab, as that doesn't work (reproduceable!). Instead, start in CEMU, then alt tab into the KB&M window (it should be small, so you can still see CEMU running in the background. Then, instead of Alt-Tabbing back into the CEMU window, just click into the CEMU window instead. That fixed it for me.

[@Lasagabaster]

I can't seem to make my mouse work. I've tried everything in this video and I've done it over and over again, but nothing seems to work.

[@saflouf552]

Hello, my mouse sensitivity is still very low even when i change my dpi, do u have a solution ?

[@kingstoic7513]

honestly i just go to ingame settings and change camrea to very fast alos put x and y axis to 1

[@saflouf552]

@@kingstoic7513 yeah its work And is it possible to have the click ? Cause i can't bind it ://

[@stars5173]

@@saflouf552 I used Razor Synapse to make a seperate profile on my mouse with the buttons bound to computer keys, and then set those key inputs to buttons, so i could click but press a key

[@landonharl9271]

I did this and now cant switch back to controller. I can rebind everything with the controller but when i click into the game, it doesnt do anything

[@AmirAeeni-v8s]

Hi, great video. Thanks. Although i have one issue and that is that my control wont automatically fill out after i put xinput and controller1. Can you help out please

[@bryanjones4311]

I have an issue with regards to the mouse part. Camera is working fine when I move my mouse and the cursor is centered and hidden, however the mouse buttons arent responding. I set my Left Mouse to X in M2J but it wont respond in-game.

[@michaelwtffff]

Same here. The binds for the mouse clicks don't work in-game. I can only move my camera around with the mouse.

[@bukizzle316]

@@michaelwtffff did you ever solve this issue? I'm having the same issue with cemu 1.27.1 and the latest build of mouse2joystick. Mouse clicks are not registering regardless of M2J's "disable mouse clicks" setting.

[@michaelwtffff]

​@@bukizzle316 I was able to solve it. I set what I wanted my left and right click to be in M2J. Then I re-added the controller/keyboard in the Input settings. Don't change the keybinds for the input settings you have for the M2J left/right mouse clicks, just leave them default and greyed out. Change the other inputs to the keybinds you want and it should be good. Make sure to have the "disable mouse clicks" off. Let me know if that works or makes sense... Kind of hard to explain.

[@Rodyx9]

@@michaelwtffff Bro please elaborate or make a video what you said is so confusing

[@Rodyx9]

@@michaelwtffff from what I understood from your comment, I should bind mouse2joystick binds. Then readd my controller input settings in cemu again in a new preset? Then I should not change the keybinds for the input settings for m2j just leave them default grayed out but if they're grayed out than they dont have a bind. Then change the other inputs to keybinds. I dont understand the goal here at all please help if you still know the fix

[@Joshua-no1it]

what if you want to use a controller sometimes and a keyboard sometimes, will i have to re-map everytime?

[@Swashed_]

I think you can save profiles

[@MrVector7]

Please help with mapping the button for scope

[@CHIROTHECA]

Do you mind sharing a link to the "How to play BOTW"?

[@PlatinumShadowRayn]

it wont let me use the intended keys on the keyboard i put in for the keyboard controls. so when i start the game and press alt for the start button, it simply doesnt work, and i followed all the steps in this video EDIT: figured out how to get the keyboard to work, the mouse still doesnt work

[@kruzworks]

I dont have any plus button for some reason

[@suryaamirtharaj1370]

hey there can u put tutorial for 1.22 version of cemu

[@mekakushy3711]

thanks, it helped me a lot, luv ya

[@Swashed_]

My pleasure:)

[@king_of_daldar143]

what to do on mac?

[@natanielzz5210]

can you explain please how you setup mouse buttons? I can rotate camera, but lkm, rkm and mkm doesn't work, but I choose what they must do in m2j

[@michaelwtffff]

Delete everything and re-add the controllers + keyboard but in those settings leave the mouse binds you want as default (greyed out). Only edit the mouse binds in the Mouse2Joystick settings.

[@natanielzz5210]

@@michaelwtffff thanks

[@Add_Infinitum]

Found a very strange issue where the Mouse2Joystick only works when Cemu isn't my active window, which makes the whole thing kind of counter productive. Any ideas?

[@Add_Infinitum]

Nevermind, it's because I didn't run M2J as admin

[@MuhammadWilliams-ix8qv]

u just helped me with the exact same problem thanks

[@benfreddie2599]

Hi, I want to thank you. everything works fine. My mouse and keyboard are successfully control to the CEMU. Edit: Does this also control the gyro?

[@orange8175]

on api controller controller 1 is not there its just empty white box

[@cornorjakeson8083]

same bro no contoller 1

[@mr.simpson774]

Mouse2 input needs to be opened

[@TheRyanFlake]

is there anyway to do this on mac

[@king_of_daldar143]

hey bro what can mac users do?

[@yamilramirez3323]

hi bro I have the same problem every time I change Xinput to keyboard and close the sale it returns to Xinpunt I have tried everything and nothing works I would like to know what to do run M2J as admin and nothing works plz help :(

[@Swashed_]

What do you mean when you say you close it? It’s gotta stay open

[@yamilramirez3323]

@@Swashed_ Sorry, maybe I don't express myself well when I do what you put in the video and change from Xinpunt to keyboard and I close the input configuration window and open the control again, it is in Xinpunt and not in keyboard and even if I do it over and over again time the control stays in Xinpunt and it doesn't work for me 😢

[@bilelbouhedda3965]

@@yamilramirez3323 Same problem man

[@Cool-wh6ov]

is Vertical some sort of bug? cos I kept getting weird desync...

[@elenabrusturan]

For me, the keyboard worked fine but the mouse didn't. At first I put the settings to move the camera on my keyboard, it worked and I tried to play like this. Tho a big problem is the fact that it's almost imposible to use the bow with this settings, the camera moves to much to the left or to much to the right. I would really like to use a mouse for the camera, can anyone please help me figure out why it's not working? P.S. I don't have and I can't buy a controler, I can only play using the keyboard and/or the mouse

[@Swashed_]

What’s going on with the mouse? Does the mouse2joystick not recognize Cemu or something?

[@elenabrusturan]

@@Swashed_ I think it does recognize cemu, I activated the box for "hide cursor" and I could not see my cursor in the cemu window. For some reason the camera would not move when I would move the mouse

[@Swashed_]

In mouse2joystick it says which application it’s working for. Check there to make sure it says Cemu.exe

[@AardvarkPaysOff]

@@elenabrusturan I had the exact same issue but fixxed it. First make sure that Cemu isn't tabbed in, then right click and run mouse2joystick as admin, you should now be able to alt-tab back into cemu and have it work perfectly

[@rengokuyoo5523]

@@AardvarkPaysOff thank you man you're a real one

[@aleshofastora440]

when I try to install it says that I don't have m2jwin32.dll

[@e.t5102]

I have few problems.Crouch buttons opens in game keyboard,select button also exits from full screen and the cursor doesn't disappear while i'm playing with controller.can somebody help me?I could not find a solution.

[@huzaifatabish-u3u]

Please reply the mouse2joystick application isnt opening

[@OmegaKatana]

check hidden apps

[@mayhjuga2332]

When I go to the input settings and want to choose the controller under xinput, there is nothing there. There is no controller 1, what do I do?

[@Swashed_]

I’d try making sure mouse2joystick is open before opening Cemu

[@mayhjuga2332]

@@Swashed_ mouse2joystick was set to the programm I tried before, thank you.

[@Tetramain]

@@Swashed_ i had the same problem it isnt workig

[@ferrum7625]

My input settings window doesn't look like that... I don't have +- signs...

[@gabediaz1373]

me either

[@TurmoilGrumpy]

I don't know how you did all those "auto assigned" keys I just followed all the steps without those assigned keys

[@guotyr2502]

plus button doesn't exist for my cemu version

[@mesutataseven]

thanks man it works

[@deliserod]

i have a xbox controller but seeing this video made me wonder if MnK is more enjoyable in this game. do you prefer MnK or controller?

[@Swashed_]

I liked playing with controller way more. Some people here commented though that they can’t afford to just go buy a controller so this guide is more for them I suppose

[@udishuker1]

doesn't work for me unfortunately, something is off with the controls and i cant adjust the camera any idea how to set this up right?

[@Swashed_]

I’d double check to make sure you’re configuring the keyboard input and not the xinput input. If you mess up anywhere along the way you have to start it over. It’s a fragile setup but it’s possible. As for the mouse, it takes a bit of playing around with the sensitivity and the toggle options to centre the mouse and/or lock the mouse position. I found the mouse to be harder to setup than the controller cuz it’s so sensitive to your computer mouse settings and any extra mouse settings you may have (like dpi on a gaming mouse)

[@udishuker1]

@@Swashed_ strange, the mouse setup is not that hard to deal with but the keyboard seems to not register the changes i make to it, and i doubled checked i don't make changes to the xinput... maybe ill just buy a USB controller like you suggested although i don't really like to play with a controller anyways thx a lot for trying to help, much appreciated :)

[@vinkx3999]

What are your controls?

[@Swashed_]

I’ve opted to use a controller. Way better experience

[@arturk419]

hello, how to select L-stick as Click?

[@jeffreycabatit3152]

There's no +icon

[@maryjane5150]

can you do it for dolphin emulator now??

[@anthonyashton2840]

After i press the setting with the API, I don't see the controller setting, Any advice?

[@kaelgamerz]

Can you make the camera be more sensitive? Even putting 1 on the Mouse2Joystick resistance is way to low. Also the binding for the click to attack is not working..

[@narzangrover10]

you can change camera sensitivity in botw

[@bukizzle316]

I'm also having the click to attack not working issue but if you go to graphic packs options in cemu and under BoTW enable the camera sensitivity mod (use recommended settings) AFTER you also turn up the camera sensitivity to the max in the game options. This solved the bad camera sens with mouse but I still can't get mouse clicks to register in cemu + M2J.

[@mohameddawood1720]

there are no plus button , there is only a greyed out setting button

[@minecraftisgood1832]

FINALLY THANK YOU

[@JIXIL]

thank you so much it worked for me

[@Swashed_]

Sweet :) I’m happy to hear it

[@yoshigamemaster6127]

@@Swashed_ mine doesnt work it says not valid nfc ntag125 file

[@toki8093]

@@Swashed_ Bro i followed the guide from the website but for some reason when ever I try to press left click it doesn't attack it also doesn't pull my weapon out

[@sallytrix8713]

THANKS BRO!!!!!!!

[@KURO-qb4qu]

there s no plus button next to "controller" .........

[@gbennett58]

What about Gyro Control?

[@CandarianGaming]

It supports gyro control. I just use the Dualsense.

[@ricardo_with_clothes]

Ahoy ! Thank ye a lot cap'n, yer actions played a significant role in me life cap'n . Thanks t' ye i will experience the greatest summer vacation in me life cap'n.

[@Swashed_]

Ahoy matey! Tis a grand pleasure to be of service to ye, so ye be feelin' the warm welcome of a hearty pirate, let me tell ye! Aye, ye may have thought that ye'd be left to roam the seven seas all alone, with no one to lend ye a hand in yer troubles. But nay, ye be havin' a friend in me, a swashbucklin' scallywag, who's ready to set sail and face the fiercest storms for a mate such as ye! So ye be sayin' "Thank ye, kind sir", but 'tis I who should be sayin' "You're welcome" to ye, fair adventurer. A pirate's life may be filled with danger, rum and plunder, but tis also filled with camaraderie and the spirit of lendin' a hand to those in need. So hoist the Jolly Roger, grab yer cutlass and let us set sail on the journey ahead. And if ever ye be needin' a pirate's assistance again, know that I be at yer service, me hearty! Ye're welcome, indeed!

[@ricardo_with_clothes]

@@Swashed_ Alright me kind cap'n ! Will be wit' ye in yer journey fer life me cap'n !

[@Tuntor689]

I get the feeling this guy pirates games…

[@stars5173]

How do i make click attack

[@Swashed_]

Bind the left mouse button on mouse2joystick to be the attack button in Cemu input settings

[@kazoohaaa__]

@@Swashed_ when i set the left mouse button to be "Y", the cemu input settings dont change

[@xxtoxicxxno5240]

@@kazoohaaa__ same, idk what to do

[@aridbreeze8613]

I love how there is a link for a cheap Controller. "In case we give up on setting up the V-JOY"😆😆