How to Use Lossless Scaling with Any Game to Double or Triple Your FPS! (Step-by-Step Tutorial)

[@jekburri]

Hey guys, there's a new update!! Lossless Scaling has 4X + G-Sync support now :D Check out my new video here: kzbin.info/www/bejne/pnyYq4Gphp6Eisk

[@Mostgibberish]

i was waiting for someone to try this on minecraft finally

[@Talha__]

It's awesome, i've been getting 165 consistent fps on 32 chunks along with shaders enabled

[@Mostgibberish]

@@Talha__ YES IT IS

[@freefallp885]

I tried it out on bedrock at 92 chunks and went from 25fps to 65 its funny

[@Mostgibberish]

@@freefallp885 game changer

[@SUPERSAIYANGODPARISISFAT]

I’ve tested this on rlcraft and it’s amazing, without it I was getting 120-160 fps (with shaders) and with it I was getting a little over 300 fps

[@VolkanCavlak]

Actually a really good benchmark you read my mind and gave me all the info I wanted to see, hope you’ll have better opportunities in money too keep this content more professionally

[@basedbrandon9407]

It is a cool mod I have used it for story games mostly but there is a big drawback as it causes your input latency/lag to double which can be noticeable in fps games especially

[@jekburri]

yuuuup for multiplayer games not the greatest but singleplayer games ✅✅

[@GraperPie]

it doesn’t do that anymore

[@keyzeyy1958]

make sure your gpu isn't getting maxed out. have it at most at 95% usage and not more. this will remove the input lag by a lot. you also need to use a frame limiter with this software and the best one to use are in--game frame limiters which have the least amount of latency. if an in-game frame limiter is not available, you can use nvidia control panel or amd software or RTSS to limit the frames however this does add a lot of input lag.

[@chrls5559]

@@keyzeyy1958 limiting your framerate increases latency. doesn't matter if it's in game limiting or third party limiting. do not spread misinformation.

[@keyzeyy1958]

@@chrls5559 This is a common misconception. You can search here on youtube on how frame limiters can improve latency by removing the render queue of the cpu to the gpu. This is most important with frame generation like lossless scaling where it's only temporal and has the disadvantage of having quite a bit of latency. Limiting the frames can help remove the load on the gpu thus decreasing the render queue which in turn decreases the latency by a huge margin. I hope this helped.

[@exh_cheats]

You can't realistically use this on any competitive title such as Call Of Duty, Fortnite, Apex Legends etc. It causes lag and major latency. I would only use this on a story mode gamemode.

[@jayzed2000]

Well maybe not the frame gen as it's known to do that, but the upscaling has no such issues. Only the expected artifacts that come from upscaling itself.

[@V3l_N]

had no issue playing csgo with it

[@zaneatat]

​@V3l_N i did, the input latency is unplayable

[@Novessian]

Input latency is not an issue with this method of frame generation, as the standard frames of input still occur on the normal frequency;however, some gpus take longer to render the captured video tho creating latency. Purely based on hardware

[@djdolbayob7908]

​@@jayzed2000it still adds latency which depending on your level could be an issue

[@Alichan9721]

hey man you sound like a cool dude, great video I am also stunned by the tool!

[@jekburri]

Thank you! 😅

[@Alichan9721]

@@jekburri no problem dude, I subbed to you too cuz why not lol

[@marwan2005]

Try Special K limiter very recommended for Frame-Gen technology use frame pace + auto bias sync which is brilliant V-sync for monitor and no V-sync for input so you will have fast input delay and smooth image not like the regular V-sync, Btw great video

[@sezr12]

Is it an app ?

[@marwan2005]

@@sezr12 it's a Program for frame limit in games and couple of additional features..

[@sezr12]

@@marwan2005 i tried to search special k Limiter but didn't find anything. Can you like give a link to something if you can?

[@AnisTheLxgend]

Noted.

[@FeliceJM]

You can set a game capture to the lossless window to capture it in full fps

[@jekburri]

@@FeliceJM I couldn't figure it out with OBS but i saw other people got it to work. Do you know how?

[@Insane_user]

remember lossless scaling do not know what is the hud and what inst the hud, so it creates "artifacts" that make your game look really strange if you dont know anything about lossless scaling you gotta search about it

[@RubyKaneki]

latest update to Lossless Scaling 2.10.1, the developers have addressed the issue of HUD (Heads-Up Display) artifacts in games. This was a known problem in previous versions of Lossless Scaling, where the upscaling algorithm would sometimes cause visual artifacts or distortions on in-game HUD elements, such as health bars, mini-maps, or text overlays. According to user reports and reviews, the latest update has largely resolved this issue, and HUD elements are now rendered correctly and without artifacts in most games. This is a significant improvement, as it means that gamers can enjoy the benefits of Lossless Scaling's upscaling technology without compromising on the visual fidelity of in-game HUD elements. It's worth noting that the fix for HUD artifacts is not a one-size-fits-all solution, and some games may still exhibit minor issues. However, the overall consensus is that Lossless Scaling 2.10.1 has made significant strides in addressing this problem, and the majority of users are no longer experiencing HUD artifacts. If you're still experiencing issues with HUD artifacts in a specific game, it's always a good idea to check the game's compatibility with Lossless Scaling, as well as any specific settings or workarounds that may be required to resolve the issue.

[@Vinayak4209]

man of his word

[@jeffzyzzos8562]

Even though is catered for amd gpus because nvidia already has its own dlss and framegen however they are both usable and the fact this runs on most systems effectively is impressive

[@AnisTheLxgend]

I'm on gtx 10 series and I don't benefit from such nvidia features

[@jeffzyzzos8562]

@AnisTheLxgend exactly dlss is for 30 series and dlss 3 is only for 40 series so it's also hardware specific

[@NakaRlive]

Setting the scaling mode from aspect ratio to fullscreen removes the black borders

[@UnityGamingg]

best vid out there explaining how to use it thank you

[@snihyper]

that's so awesome!!

[@MapYui]

oooooooo that keyboard sound so fucking nice!

[@jacobguzz5130]

I've got a problem, when I scale it closes itself, any solution? please

[@darwin_1865]

Works so well i got 90 fps normally with frame generation 160 fps while using shaders

[@Baldeur]

Does this work on proton?

[@eol251]

Does this work with Minesweeper?

[@jekburri]

Oh boy, running that beast of a game will be tough.... Good luck running that. Hell even X4 mode won't be enough to run that godly of a game 😉😉

[@mischivious_YT]

I was your 100th subscriber

[@jekburri]

@@mischivious_YT woah, I have 100 subscribers? 😮 neat! Thanks Mischivious, I'll never forget you man 😪❤️

[@Kaiser_Russia]

why I'm losing fps? I'm running bf5 with 60 fps, when I turn on lossless scaling, the fps reduces to 38-48. Do you know what I'm doing wrong? Another thing is, what I do when the game doesn't have framerate limit to 30 fps? Looks strange, but the game can only limit to 40 or 20 fps.

[@jekburri]

Hey, someone else had this issue in the comments, I'll reply with the advice I gave the other person and it worked for them. Let me know if it resolves for you: "My guess is that you are on a laptop? In the settings of Lossless Scaling there is an option to choose your "Preferred GPU", it should be under GPU & Display on the right column where it has Frame generation. My first suggestion would be to choose your dedicated GPU (if you have one) as using your weaker GPU will obviously give worse results. My second suggestion is (in the same right column) turn "Allow tearing" on. This will make it look a little bit worse when you move the camera around, but if you are struggling to get gains this 100% does improve it slightly. My third suggestions is (same column) to turn "performance" on. This I am not too sure technically what it does, but the name is the intention. My last suggestion would be to make sure you are using X2 and NOT X3. X3 uses way more CPU power. I generally never use X3 unless I am watching a movie, it's just unnecessary, plus the artifacts generating 2 intermediate frames is not worth it to me." Hope that helps

[@Kaiser_Russia]

@@jekburri now worked, thanks!

[@KiryuuKazama]

​@@Kaiser_Russiahow did you fixed it?

[@Kaiser_Russia]

​@@KiryuuKazama In-game: lower your resolution (optional, makes game faster, but in some games the graphic seems a bit strange), lock your fps at half of your screen frequency (60hz to 30fps, 75 to 37, 120 to 60, etc...) and put the game in windowed mode. In lossless scaling you change "Scaling mode" to fullscreen. "Scaling type" idk which is the better but if you want fullscreen game you need to select one mode.

[@WololoWololo2]

Full screen is more optimized for Windows

[@Cluode]

I’m very curious if this works in VR or not

[@sashh_low]

hey! can you tell me how did you get the custom cursor please?

[@jekburri]

I can't send links but if you google this it'll be the top result! Google: "Windows 11 Cursors Concept V2 by jerpiCreations"

[@sashh_low]

@@jekburri thanks man I appreciate that also nice video ❤️

[@EJK_]

how bad is the ghosting on fast paced gameplay

[@llxs6]

what is your GPU?

[@jekburri]

@@llxs6I have a RX6600, but this program works with all gpus

[@llxs6]

@@jekburri I buy it, but when I use it the frame drop from 30 to 12 and doble the frame it gose 24 and like this I lost 6 frames

[@jekburri]

​@@llxs6 Not to worry! I had many problems like this when I first started using it. My guess is that you are on a laptop? In the settings of Lossless Scaling there is an option to choose your "Preferred GPU", it should be under GPU & Display on the right column where it has Frame generation. My first suggestion would be to choose your dedicated GPU (if you have one) as using your weaker GPU will obviously give worse results. My second suggestion is (in the same right column) turn "Allow tearing" on. This will make it look a little bit worse when you move the camera around, but if you are struggling to get gains this 100% does improve it slightly. My third suggestions is (same column) to turn "performance" on. This I am not too sure technically what it does, but the name is the intention. My last suggestion would be to make sure you are using X2 and NOT X3. X3 uses way more CPU power. I generally never use X3 unless I am watching a movie, it's just unnecessary, plus the artifacts generating 2 intermediate frames is not worth it to me. Hope that helps

[@llxs6]

@@jekburri yes I use laptop ,and thx for your advice and I will make what you say thx 😄

[@jekburri]

@@llxs6 good luck!

[@danabani]

I want to use it with my friend and both of us uses laptop. Mine has 3070 max q + i7-11800H and my friend has 1050 + i7-8650U, is it possible to use that app for my friend in order to gain performance with the crappy gtx gpu? Thanks!

[@jekburri]

For sure! your friend will definitely feel improvement with his older gtx1050. I highly suggest he purchases the app on Steam and give it a go :)

[@danabani]

@@jekburri great, thanks a lot, I'll tell him to buy it and see how much the improvement

[@Taavett]

@@danabani if he tests it out for under 2 hours, he can refund it if he doesnt like it

[@danabani]

@@Taavett Actually, both of us had already used it and apparently, the better your cpu is, the better it perform. Mine was i7-11800H and I gain around 110-115% more fps at a surprisingly stable frametime. while my friend with i7-8650U only gain around 75-85% more fps and not so stable frametime. both of use the same settings/config for the Lossless Scaling. tbh, I kinda like it and so my friend. side note, Lossless Scaling runs better and perform more stable when the game is using directx rather than vulcan. me and my friend tested it in but only in BeamNG sooo this might be just an exceptions

[@C00L3R]

bro called the 1050 crappy 😭

[@xxmichal]

from 180fps to 20 💀

[@jekburri]

@@xxmichal bro how 😱 lol I replied to 2 others on here about probably the same reason why, scroll thru and you'll find the fixes I suggested. It's a simple fix most likely

[@xxmichal]

@@jekburri i did do all still same issue fr

[@jekburri]

@@xxmichal hmm. Unsure then :( I'm sorry. I should mention that the program sometimes has its hiccups, might just have to wait a while until it magically resolves

[@djdolbayob7908]

why tf do you need framegen at 180 fps

[@xxmichal]

@@djdolbayob7908 since yes

[@MaxerV19]

Im waiting for the program to get perfect, in a ton of games theres still a lot of artifacts even when i double the fps

[@AnisTheLxgend]

I tried this on god of war 3 on a ps3 emulator, worked nicely only thing holding it back is my CPU, and on roblox which suffered some bugs

[@MaxerV19]

@@AnisTheLxgend noice

[@pixelqiwi]

really wish the devs of the software weren't petty and didn't block russia from buying it, i would've bought it in an instant, yet now i have to pirate the old versions :(

[@djdolbayob7908]

поменяй регион стима

[@Sparx2OP]

I found an latest version just google it you'll find it eventually

[@pixelqiwi]

@@djdolbayob7908 делать мне больше нечего ага

[@AnisTheLxgend]

Would this work on emulators? I have rpcs3 and god of war 3 installed and it runs kinda slow at 20-25 fps (my specs are considered low end or budget in todays standard)

[@jekburri]

it's PERFECT for emulation because it uses the extra headroom ur pc has. PS3 emu is cpu heavy so you can probs get away with X2 mode from 30 to 60 or 60 to 120, for x3 x4 I wouldn't recomend for this low fps.

[@jekburri]

just remember if you have bad experience using this app, make sure to put performance mode on for both frame gen + scaling

[@AnisTheLxgend]

@@jekburri ohhh so that's what it does.. I always thought it makes it do better not reduce the load

[@jekburri]

@@AnisTheLxgend well, it requires lots of tweaking... for sure. Thats why you gotta make game profiles with specific configs per game. Easier to manage. If you have the wrong settings itll just perform worse than it does normally without 🤣

[@user-sq2bz2fq3nf]

I tried this on minecraft, but qfter a couple seconds lossless scaling just closed What do i do with this? Cpu: intel i3 2120, gpu:integrated intel hd graphics 2000, 10 gb of RAM When i starting lossless scaling, everything is good, but it closes by some reason

[@jekburri]

it actually crashes the LS app? Hmm... I do know that it can be hard to run on older hardware (2nd generation i3 is verrrrrrrrrrrrrrrrrry old and very slow so this might just be the case :/)

[@user-sq2bz2fq3nf]

​@@jekburriokay I got it, thanks!

[@Minamoto2041]

I'm trying this with fifa 16 will it work that well?

[@jekburri]

That's a great game to try. I'd say anything is great with this app besides FPS shooters where you really need low latency input to aim and shoot precisely. (Opinions do vary but that's mine) Fifa 13 is on pc? or are you emulating? (this works with emulation too btw, heck, even watching Movies you can frame generate to 120 fps hehe)

[@progaming5555]

nice, wish i could buy it :(

[@jekburri]

it's only 8 bucks!!!

[@progaming5555]

​@@jekburri 8 bucks is actually 440 for me in my currency 😭

[@fenicy]

just make that 4k or 8k motitors resolution to 1920x1080 and then you will better fps than that small thing that you cant even see

[@Gaiet4]

Alguien me ayuda, estoy inetnato para usarlo en videos y pruebo con anine que usa 24fps y en vez de aumentar disminuye y es mas disfrutable sin usar el programa

[@jekburri]

it decreases??? I don't know why that is sorry :( try in the settings to make it specifically target the display your using. as for you enjoying it more at 24 fps, I've heard many people say the same it's genuinely personal preference, I tend to like using it for everything I watch now but people have told me they enjoy watching movies how they were intended to look.

[@abdoun8214]

Is there a tuto for linux?

[@cameleon2mur80]

You shouldn't be using Linux if you can't google something or try compatibility layers

[@aaaaaaaaaaaaqqqqqq]

Thankd for trying it on minecraft man

[@bimgus0]

are you sure its lossless?

[@xxdeadshotxx_yt6432]

If I have a 60hz monitor can I just use this to get more fps because in most games I average 40fps I need like 60fps tbh

[@jekburri]

@@xxdeadshotxx_yt6432 Hey, I love getting comments from ppl 😁 To answer your question, yes. If you do this though: please turn Vsync on in the lossless app or it will be a very poor experience with varied results. I should also mention that the primary use for this is to double/triple your fps so its always best practice to lock at a framerate you want to double / triple but its totally okay to use in the way you mentioned (I often cap at 60 and X3 to 180 but my monitor is 165. I do it for better input response times)

[@jekburri]

@@xxdeadshotxx_yt6432 also: pls buy a higher refresh rate monitor it will be life changing. They go for around 100$ on amazon now which is a steal for a 144hz! 😁

[@xxdeadshotxx_yt6432]

@@jekburri THANK YOU BRO LOL AND I WILL IM SAVING MY MONEY FOR A 144HZ MONITOR

[@xxdeadshotxx_yt6432]

@@jekburri I also subbed

[@jekburri]

@@xxdeadshotxx_yt6432 Thank you 🙏

[@NatetheNintendofan]

Linux support please?

[@Kelette]

IIRC gamescope already has it built-in

[@gamezlockedz1530]

it seems that on the video u can get it to full screen I want to use this for xenia does anyone know if i can still get fullscreen

[@jekburri]

@@gamezlockedz1530 works with anything. Yes that will work. The reason you see the black box around the game centered is because i have fsr scaling OFF, if you turn that on it will do as you wish

[@gamezlockedz1530]

@@jekburri Can u still have fsr scaling on and have frame generation on at the same time to get rid of the black borders ?

[@jekburri]

@@gamezlockedz1530 Yes you can use both at the same time :) as for the black borders, they shouldn't show up if you have the game window maximized. It taked the resolution of your window and centers it on your screen with/without scaling turned on

[@NakaRlive]

Just change the scaling mode from aspect ratio to fullscreen

[@Italian_Isaac_Clarke]

So it's almost worthless for games.

[@AliFindsGadgets]

I did it on dark souls 3 but the latency and delay are insane 😭 you have any solution to solve.this latency

[@jekburri]

@@AliFindsGadgets Hey! Hmm.. only reason you run into latency is when your actual FPS before frame gen is below 40* ish. I would recommend these for least latency: Performance mode on Allow tearing Use X2 mode, not X3. If ur nvidia gpu, go into control panel and turn on the setting for better latency (forgot what its called lol but cuts ur latency in half for input in most cases though most ppl dont notice it)

[@AliFindsGadgets]

@@jekburri goddamn thanks dude i really appreciate your help

[@AlexBell1991]

​@@jekburriDid you add the games short cut or lossless scaling short cut to enable low latency mode?

[@scarf744]

mine broke after 3 days

[@aSkyclad]

I assume this would work with emulators yeah? Could be cool for games with hard caps and no 60 fps patches/without speeding up the games internally

[@МР4]

nice, what about valorant?

[@MrChubbyBub]

i wonder could this work on vr 🤔

[@jekburri]

I was skeptical about this too, theoretically it *could work in the near future

[@Gemmawardsfan]

Can this work for the sims 4

[@jekburri]

@@Gemmawardsfan As the title says, works with any game. 😄 *for as long as it's not exclusive fullscreen.

[@cripsta8ball]

Hey, I saw in a previous video of yours you were using this program on SPT EFT. I was wondering if this'd work on live EFT against real players. Thanks.

[@jekburri]

I play live live/spt EFT with it all the time, haven't gotten banned yet! Lots of people say you risk getting banned but I've been using it with EFT for quite a while now. I guess use at your own risk! But yeah this works with anything, even watching youtube videos or movies :)

[@Ribotop]

How to get it for free?

[@atheck07]

you cant

[@jekburri]

As he said, you can't. Usually I am all for pirating software but for this one I'd say please support the developer. It's only 8.99 too... and with it's gains in recent popularity I can see this being 30$ in the near future which will suck!

[@raffazaver]

@@jekburri nah they wont make it 30$, if they do people will hack their software way more often

[@jekburri]

@@raffazaver we'll see 😅🤞

[@Mostgibberish]

@@jekburri Can you please try it with Minecraft shaders please please please

[@noobie8196]

I think you should active windows

[@dogevoadoriii]

Does it work with battlefield 1?

[@gioBigestfan]

works with any game man

[@iateawaffle8184]

it works with literally anything that has motion in it. Even live streams.

[@rch5395]

Just use magpie instead

[@victor6010]

whaaaaaaaaaat u can use it even to watch movies? the heeeeck

[@jekburri]

@@victor6010 yep :)

[@HetPorototo]

Roblox moderation is EXTREMELY weird so could i get banned if do it ?

[@sezr12]

What i know it doesnt do anything to game files or anything like that so i dont think you will get banned i tried it in roblox a bit not a lot but didnt get banned but i advice to search about it

[@jekburri]

@@HetPorototo you are completely safe using this program for Roblox, or any other game. I assure you of that. :)

[@HetPorototo]

Ok thanks for the answers ! (Roblox only bans exploiters for 1 day anyway lol (and some ppl are getting ban for weeks for saying "g"))

[@sezr12]

@@HetPorototo fr roblox bans you for the stupidest things

[@HetPorototo]

@@sezr12 roblox has the worst moderation ever, 99% of the bans are accidental in a way and the 1% that are getting a 1 day ban or warnings thats crazy lol

[@cheesewizvevo]

Didn’t work for me at all

[@jekburri]

@@cheesewizvevo Read comments, I replied to 3 or 4 people and got it working for them. :)

[@cheesewizvevo]

@@jekburri I already did didn’t work so I refund

[@cheesewizvevo]

@@jekburri thanks for help anyway tho

[@jekburri]

@@cheesewizvevo oh man really? Sorry man :( That's wild though, I am curious as to why? What are your specs? My guess is you either don't have a gpu, dont have a good enough one, or your cpu is very old.

[@cheesewizvevo]

@@jekburri yea I use a really bad laptop

[@cameleon2mur80]

You got scammed this is multiple free stuff put together slapped on steam

[@jekburri]

@@cameleon2mur80 Your talking about Magpie right? I've used that in the past for scaling but I don't recall it having any sort of frame generation. Do you happen to know?

[@cameleon2mur80]

@@jekburri the guy that made this thing did the exact same thing magpie did or maybe even less and just added AMD's tech into it some games will already have that already implemented in a better way since the fake frames can be made for the render only there will be a free thing that do the same it could even be magpie in a future update that guys only credit is being very fast

[@jekburri]

@@cameleon2mur80 interesting to know!

[@szshz]

Sup bro, for permanant free windows liscence download MAS script ;)

[@jekburri]

@@szshz those MAS/KMS key activators are injected with malicious code. There's a popular vid on youtube where a forensic analyzes the code + reverse engineers it and found malicious key loggers etc. Scary stuff, especially because I used to use those myself.

[@szshz]

@@jekburri damn bro what the hell

[@Raspora]

my problem is here . that you allready had the game 60. so you showed how you reach what u allready got.

[@jekburri]

??? Sorry I do not understand. I had the game locked at 30 FPS then frame generated X2 to 60 FPS. Then I had the game locked at 20 FPS then frame generated X3 to 60 FPS. If you mean that my computer is fully capable of reaching my target framerate, yes you are correct. But this works for those who cannot reach their target framerate as well, this is why I made this test video to display locked lower fps and then show how it looks once I apply frame generation. Hope that helps

[@aaronshaw22]

If and most people can play something like minecraft at 60fps how is lossless helpful

[@jekburri]

@@aaronshaw22 what? 🤣 This is why I capped my framerate to show and prove how frame gen works 😋 I am fully aware that my system can play minecraft.

[@aaronshaw22]

@@jekburri sorry I should of phrased it better, what I meant is can it go above the monitor refresh rate or will that cause screen tearing etc like for example I have a 240hz monitor, does it mean I would have to cap the game at 120fps to use the 2x scaling

[@jekburri]

@@aaronshaw22 No worries! Sorry I didn't understand. Ahh I see what your saying now. Yes, you can use X2 at 120 lock to reach your monitors refresh rate of 240hz, or you can use X3 from 80 FPS to 240 if the game is more demanding. As for screen tearing, you can turn v-sync on and you won't notice it as much but you will almost always notice artifacts as these are fake frames and not real ones. Obviously the higher FPS, the less you will notice so for your sake with a 240hz monitor it should be painless and a joy to use! :) Lemme know if that made sense/helped or whatever. I use this to reach my monitors 165hz and I don't notice any input lag/tearing at all!

[@morgan3625]

activate windows

[@jekburri]

@@morgan3625 Never!!! 😋 been flying under the radar since windows 10 came out

[@bitit_boy]

pirate it ​@@jekburri

[@rPenek]

You wont see diffrence no matter what you do because youtube allows max 60fps.

[@jekburri]

@@rPenek I know, thats what I said in the vid. I locked the game to 30 and 20 for this exact reason lol

[@iateawaffle8184]

That’s why he put his game to 30 and 20 frames

[@DUNK311]

it just made my game worse.

[@vis7040]

activate the windows!!!!

[@jekburri]

@@vis7040 NEVERRR!!! 😋

[@U00v]

hey meant the sea level activtion​@jekburri

[@MariuszWojtas-s9o]

Nie po to płaci się za automatyczną klimę, żeby samemu, jak jakieś zwierze kręcić pokrętłami.