This video is three years old, but... I just want to say, THANK YOU!
@GinoCambria10 ай бұрын
The best explained Break a 3D model video. Thank you!
@ruanpienaar5400Ай бұрын
This made it so easy for me to do a quick remix, thank you!
@sonnyvandewetering6993 жыл бұрын
Very simple, fast and straight forward, thank you, An impacient person
@nickla6543 жыл бұрын
I‘m in the process of printing an entire Captain Rex armor. All I can say, thank you so much, I‘ve been searching for a video like this in ages, thanks mate and great video!
@kyledarrenhanson Жыл бұрын
great straightforward tutorial, appreciated
@Rise3DBuilds Жыл бұрын
Thank you
@jakehamblen3982 жыл бұрын
Thanks for the great info, brother! You broke it down in simple terms for me and I feel like I learned a lot from this!
@allnaturaledgedesigns2 жыл бұрын
More meshmixer tutorials, thank you, great video
@johnteasell189 Жыл бұрын
Thank you. So straight forward and easy to follow. Was able to do to exactly what I wanted to do within 1 hour of downloading meshmixer without any prior experience. Very helpful.
@paulmeyer67903 жыл бұрын
Been waiting for this, need more of this type video.....
@Rise3DBuilds3 жыл бұрын
More to come!
@johncook538_modelwerks Жыл бұрын
Thanks much! A great intro!
@grantandrews85598 ай бұрын
Cheers mate helped me continue my build.
@confuzzled72658 ай бұрын
Thanks for the video, it helped immensely
@thogar13 жыл бұрын
Thanks so much for this video.
@Rise3DBuilds3 жыл бұрын
No problem. Hope it helps
@richd7916Ай бұрын
I am doing a medieval helmet. I considered what you did but I have a cadet 100,100,120mm and with that many pieces I am worried about the strength at all the edge to edge seams. I came up with a possible solution. Take the original Make copy 1. Make copy 2. scale copy 2 to make it smaller by just under 1 wall thickness. Create a union between copy 1 and 2. The result is an extra thick version of the original. Now do a Boolean difference between the original and the thick version. Now you have a version that fits exactly within the original Now cut up both inner and outer helmet making sure that the seams are always offset and never line up. Now when you print all the parts you end up between with a huge glue area between the inner and outer surface, That's my theory anyway. Sound reasonable. I can't check it in practice yet because my downloaded original seems to be full of errors that analysis won't fix so the Boolean union is not working. Yet
@peterh4049Ай бұрын
Thanks man
@davidpodmore59412 ай бұрын
Hi I loved this video, tried it and it worked so thanks, I also have question, I put my printer details in and every time I reload it I have put the printer in again, why does it not save my printer.
@zill54 Жыл бұрын
link to meshmixer is dead . and they are pushing fusion360
@rishrishvandhan79564 күн бұрын
love you bro
@Mandomarc9 ай бұрын
I’ll be trying this exact same thing for my elegoo Neptune 3 plus
@parvariramin Жыл бұрын
hi Why did I cut and slice my model into pieces with Meshmixer and then put the pieces together vertically in Cura, there were approximately 24 pieces that I was able to prepare for printing in 3 times in Cura, i.e. in 3 stl files, my problem is that I printed the first layer It is printed like a net, which means that it is not like my other prints that the first layer is correct, clean and smooth, what is the problem? I have adjusted my models from left to right and horizontal to vertical to fit more in Cura
@Rise3DBuilds Жыл бұрын
Can you email me som screenshots of these you are seeing? Mike@rise3dprinting.com
@charmini73 жыл бұрын
Awesome! thank you!
@bigtush852 жыл бұрын
Thanks man.
@Tierce33 Жыл бұрын
Good info, but hitting your mic was driving me crazy. Thank you for the vid!! Gonna put this to use for sure.
@sebastianbk4598 Жыл бұрын
very nice and detailed video, thanks for the content. I see we both use the ender3 can you make a video or share a printing profile that doesn't take too long to print? Idk where I f-ed up in mine but the simplest thing just takes tons of hours and the supports are super hard to come out :(
@duanemitchell5650 Жыл бұрын
What did you use to glue it together
@Rise3DBuilds Жыл бұрын
I usually use super glue, depending on the model I will some time use Epoxy or my favorite is to use the 3D printing pen to weld them together
@cguevara90143 жыл бұрын
Good video.... 1 question..when u cut and print out pieces, do the parts print out flat where they connect to the rest of the helmet? Or do they print out with joints? TIA
@Rise3DBuilds3 жыл бұрын
They way that I show in this video they are only flat. In my other meshmixer video I show you how to do it with Joining pins that basically can create a joint effect. I would recommend checking it out.
@drpeppero32 жыл бұрын
When I edit a gauntlet in meshmixer save and export to Cura. The measurements I did in meshmixer are different in Cura. For example. The wrist opening is 63.5mm. The elbow opening 76.2mm. When I export to Cura. The openings are smaller then what I did. Is there something I need to turn on or off in meshmixer?
@samueltwan21623 жыл бұрын
Great video, thanks a lot, just have one question, can you tell me please, what are the hardware requirements to be able to use meshmixer? The high ones and the medium please..... And thanks again, keep up the good work :)
@Rise3DBuilds3 жыл бұрын
System Requirements Meshmixer 3.5 Microsoft Windows 7 or later or OS X / macOS 10.11 or later 4GB system RAM Integrated or discrete graphics card with latest drive
@samueltwan21623 жыл бұрын
Thanks, and what about the processor?
@Rise3DBuilds3 жыл бұрын
You know it doesn’t say on the site. This is a single thread application so anything over a i5 would probably be fine
@samueltwan21623 жыл бұрын
Great, thanks)
@Cylic52 Жыл бұрын
My model has a red outline and i cant fix it. any idea how to?
@ravenxbmc14563 жыл бұрын
hi mate been following your vid when i drag my mandalorian helmet (cura file) i get computing message but nothing loads just black screen any advice tips please cheers
@Rise3DBuilds3 жыл бұрын
Is it cura or meshmixer?
@ravenxbmc14563 жыл бұрын
@@Rise3DBuilds hi m8 my cura works ok just installed mesh mixer following your vid loaded mesh dragged cura file and just got black screen it seemed have loaded as when i try to load another file mesh askes if i want to save file i first file loaded just tried the items built in rabbit etc nothing but black screen thx again
@leatherandpoemscharmyman57743 жыл бұрын
does it worthless for miniatures? I mean pla miniatures not resin? it is useful to cut the model for (pla printers such as ender 3 or ender 5 )? thx!!!
@Rise3DBuilds3 жыл бұрын
Yes I cut up my prints for miniatures with pla printing. Reduces supports, makes it easier to print, and it will allow you to get some better detail. I have moved to resin for minis but you can get some awesome prints with pla and switching to a .2 nozzle.
@leatherandpoemscharmyman57743 жыл бұрын
@@Rise3DBuilds Yep I am trying to get a .2 noozle aswell ... one question... for cutting miniatures ? do I need to planning a keying-pinning (key and hollow structure) for parts? one part is male and other female? or just go smooth and flat and with just "glue" I join the parts? thx!
@Rise3DBuilds3 жыл бұрын
You can do either with minis. The pin gives good strength but often times I will use a hobby drill and make a hole and uses part of a paper clip to connect the parts. I am working on a video on how to do it for the model and mesh mixer
@leatherandpoemscharmyman57743 жыл бұрын
@@Rise3DBuilds yeah I would like to see it! thx
@Rise3DBuilds3 жыл бұрын
Stick around!!!
@guidancebeats2 жыл бұрын
Is there a quick method to reverse this process taking the smaller cuts and reassembling back to a larger piece without having to realign everything again that takes quite a bit of time
@joeking52112 жыл бұрын
Failed at 3:22 - No printer bed shown or printer in top right corner. Set a printer from 'preferences' but still no show on fresh download & install of Meshmixer how do you get the selected printer to show in top right and have a bed displayed the model should reference to ???????.
@juliusvalentinas Жыл бұрын
This is crazy nonsense, where is automatic cutting? Hello 2022 or 1995?
@warrenblair39663 жыл бұрын
Dude u gotta do something about that banging in your sound. It's very distracting
@MrMarkEnsor2 жыл бұрын
I'll say
@Splatdash2 жыл бұрын
Whats the printer software name, printer software path, format of file to printer software default stl, and command line arguments
@angelarepking26983 жыл бұрын
Is cura free
@Rise3DBuilds3 жыл бұрын
Yes it is!
@luke504693 жыл бұрын
How do I download it? The url doesn't work
@Rise3DBuilds3 жыл бұрын
Looks like you have to go to the autodesk site now.
@Rise3DBuilds3 жыл бұрын
Looks like they fixed the site. It is available again.