How to Use the 1 Step Wire Looper Tool

This video from The Potomac Bead Company shows you how to use a 1 Step Looper tool, which rapidly bends and trims 18 to 26 gauge wire in just one motion. This allows you to keep a consistent loop quickly with very little work, and it operates with half-hard or dead-soft precious metal or craft wire.

[@ahsir8]

Hey, you did a wonderful job on the presentation! Now I just want to get that Looper and start creating! You are very clear on the use of the instrument and offered some great tips. Thank you and continue to show us more tools!

[@MsLouisVee]

I have the tool and I also have a problem with the loop remaining open but to me it’s easier than wrapping it myself I can take my pliers and close the loop later

[@TERESITZLEWIS]

I love the 1 step wire looper tool. I had a expo last weekend and I had to make a lot of earrings. This tool was a amazing!

[@mariabooth8104]

I'm left handed and can use this just fine. It's a really good tool to use. I was able to purchase it in three different loop sizes. It saves me a lot of time when making necklaces.

[@psychedelicpython]

I make a lot of Rosaries, which means 118 eye pins made with round nose pliers. It usually takes me about 6 hours if I use round beads, and after the Rosary is together I go over the eye pins to make sure they are basically the same size. A one step looper would be great in saving me time.

[@Jeni10]

Bella Bella I make lots of Rosaries too!

[@psychedelicpython]

👍💜💙❤👍

[@Jeni10]

Bella Bella I bought this tool but I never use it. I prefer my round nose/concave pliers because they're much quicker and I don't waste any wire.

[@wedontgo2ravenholm]

This is a great tool to have because it can save your hands from repetitive motion when doing a lot of loops. Great video as alwats👍

[@roselesniewicz1211]

I have arthritis in my hands this item helps me because most of the loops I make are distorted so now I can work faster thanks

[@patriciasmith7074]

Rose Lesniewicz I have it too and I don’t have much grip strength and I could see where it would make them look real pretty.

[@subapoornimabalaji8277]

Hello In this tool they have a 3 sizes. Suggest me the perfect size for making earrings.

[@Potomacbeadco]

This one makes 2mm loops. www.potomacbeads.com/1-Step-Looper-Tool-p/9674.htm

[@lynn69jackson]

I have 3 different sizes of this tool and it has saved me so much time and no more guess work.

[@marthaceciliarodriguez4884]

Wuuo hermosa donde lo consigo

[@debsam77]

I still love mine although the loops are small but I made and absolutely beautiful rosary with it and it was nice that it didn't close the eyepin all the way because I had to join them and because the loops were the exact same size it made the rosary hang just perfectly :-)

[@littletimeasweknowit]

I made the bead with caps ,it came out to loose.How do you make a snug fitting whiteout having so much space.

[@colmanmwero7473]

Can I know where to get this tool pls am in Zambia

[@SavaahaLightfoot]

I see a lot of people complaining about it not closing the loop, the tool will close the loops, it just takes some manipulation while using the tool. It really is a great tool and I wish I had bought one long ago,

[@cookingprof]

The fact the loop is not fully closed is a cost savings for me. My customers can choose from my 260+ dangle earring designs and they then choose what they want. Posts, Lever Backs, etc. I then make them the way that they want. 14K gold & .925 Silver can put a strain on the budget. Customers also like the fact that they have been a part of the process of a custom piece without the usual high price for custom.

[@lynnbernard8698]

I just ordered mine yesterday. I cannot wait! :)

[@antheans23]

Brilliant! Works well with my arthritic fingers 👍😺

[@sarahjane9929]

I got this at a dog thrift store for a dollar. I thought they were dog nail clippers. Glad I google lensed this lmao because it didn't look quite right.

[@AvieMare]

I can do the most intricate seed bead designs but wire looping is not one of my gifts. Any tool that will help make consistent loops for earrings and dangles sounds great!

[@Blissfuljourney_]

I just purchased sizes 2.25 and 1.5 from Walmart..the total cost for both were 40.00

[@patriciasmith7074]

They are not really closing the loops, I wouldn’t trust that your piece wouldn’t break. I want a nice tightly closed loop.

[@Potomacbeadco]

If you use 20 gauge wire for your loops, they will hold up well.

[@mamahare1025]

Is it just me? These loops don't look that great to me at all, and it seems clunkier than just using a looping plier where all you really need to do is squeeze. Plus all those little bits cut during the process are a waste. For consistency with your round nose pliers just mark the plier and wrap around the mark for every loop you make.

[@honeybuzzard2843]

EXACTLY...IT'S A TOOL FOR THE LAZY

[@fungirl809]

You have to ending up jiggling the loops fully closed.

[@OjibwayDreams]

@@honeybuzzard2843 Not everyone is lazy, this tool is handy for someone who might have carpal tunnel or other physical challenge.

[@big.fan.of.justice5754]

Its just you.

[@Yummicookie1979]

​@@honeybuzzard2843for a lot of people crafting is what they do in their lazy time so you really don't have much of a point!

[@donnaf.marshall6504]

I do like this tool. I love that I can make my own . I don't like the price 30.00. each! and I understand there's now 3 sizes. that gets pricey. I don't like the idea of multiple heads either.

[@iamher44]

the probblem is while it may close ok often you're left with too much 'neck' left as you can't get close enough to the bead to shorten it enough

[@Potomacbeadco]

Hello there! Yes, sometimes there is a tendency for there to be too much "neck" or the loops aren't closed all the way. However for beginners this is a good starting point. This is also a great tool for those who have arthritis or other hand/wrist problems.

[@FlowerGemsGirl]

I just bought this tool, but I didn't know all the neat little tricks that it could do!!! Thanks for the demo, this was great information!!!!

[@dennisgodaire485]

Thanks ... I have both sizes and find them to be something that I wish that I had long ago.

[@clairebacchi360]

I have one of those, and had no idea how to use it. I can’t remember how I got them. Anyway thanks for the demonstration. 😊

[@Potomacbeadco]

Sorry do not know of a non-machine tool that does that, but will suggest it to Beadsmith next we talk to them.

[@Potomacbeadco]

Well you would only use this tool for a heavier gauge wire where coiling is not required. For anything over 20g, yes you might as well just stick with traditional coiling methods.

[@jajanesaddictions]

Yours is the best description and video showing all aspects of the looper tool.

[@userenvy]

Idk I had high hopes to use one tool. Now I literally just got it and used it twice... Right away its made right handed. The loop is perfect but hard for me to hold. The closing tip helps. But I'm having an issue taking it off the pin. Maybe I'm putting it in too far but it gets like stuck. I'll practice more

[@333Lightwork]

EXACTLY what I was looking for!!! Thank You!!! Bought mine abt a month ago and FINALLY now able to use it!! 🤩🤩🤩 SUPER Excited!!!!

[@Potomacbeadco]

Enjoy it!!!

[@333Lightwork]

@@Potomacbeadco 😍😍😍😍😍😍 &Am!!!!! My first time EVER making jewelry and good Lord I’ve fallen in Love!!! 💜💜💜💜 thank you again!!!

[@stacey2482]

I just got one of these and they are the coolest tool ever. Making loops is so much easier now. Especially for those that have problems with their hands and have trouble using regular pliers.

[@mystarrrs3]

I got mine at AcMoore and used a 40% off coupon making it extremely affordable! I agree the loops could be a tad bigger, but I still love it and can put it to use. Maybe just with thinner wire :)

[@lynanaid]

I don't know what I am doing wrong. I follow the directions exactly. But my loops do not come out round. They are more teardrop shaped. Can you advise?

[@cynthiadiama5072]

I purchase one, and it came in today...6/20 ...will see how it works for me.

[@PREDATOR51z]

My mom has one of those and she loves it but did say she wished the looper made the exact sized loop as a standard eye pin so that both ends would be uniform.

[@mjremy2605]

Very good demo, esp that finishing off on the wire to close the first loop. A bit less talking would be good. We can see the video. Cost is $46 + $5 tax = $49 for this tiny tool. Pretty outrageous pricing for a small tool made in China. There is no reason this should be so pricey. It is price gouging.

[@kittyprisun1846]

I’m so exited I’ve decided I want to start maintenance cute things like this just for fun thanks for helping

[@louisescherbain312]

Awesome

[@louisemiller2774]

Wow....great demo on this new tool.

[@lemmingbane7653]

Thanks for the video instruction. I just received my looper and wasn't sure how to get the most out of it. Those are the simplest and clearest directions I have found. It is an awesome tool.

[@Potomacbeadco]

Glad it helped! We have a library of Better Beader episodes that cover a range of beading and jewelry-making topics that you may find helpful! Feel free to browse! www.potomacbeads.com/how-to/better-beader/

[@robinschnee5028]

Game changer

[@terinaleiato8106]

But how do you get really snug I have one and I just don't like the space it gives when I make the finishing loop.

[@MsLouisVee]

Hey just bothers me that it does not make a closed loop it looks pretty open to me

[@Potomacbeadco]

I think that's just so that you can link it to another loop, then you close it fully with your chain nose pliers.

[@lauriemfs8720]

I can't get the hang of this tool, my eye pins come out needed to much work after. Lol

[@lynnbernard8698]

Keep trying; you can do it! We have a FB page called The Beady Bunch. Come find us.

[@dabeadz]

The loops this tool forms are not precise in size. Too much wire shows after 2 loops are formed. Is there a better tool on the market? Is the Vintaj bead looper tool better?

[@annwithaplan9766]

Thanks for the video. I'd probably use another pliers to close the gap when finished. But I can appreciate a tool like that because of a hurting my wrist and not being able to turn it in certain positions.

[@newyorkglitter]

This looks awesome, I just saw it in a couple magazines yesterday and am going to order one. Great video and explanation of it all...also great name. I am Ali too..lol

[@prettyblimp]

Thanks for the demonstration, I look forward to starting a bracelet now! thanks again!

[@anastasiapaggett3848]

Thank you for showing how it works I was thinking about get this last year but now I have got better at making my eye pen 😊💯as so the story open I will be there again thank you.

[@gersgems]

Really liked your explanation. I have one & can't wait to try out your suggestions

[@johnmyers2063]

I would like to see a left-handed person use this tool.

[@kayscreativeboutique]

John Myers nope-not going to happen It's made for right handed people. I am a lefty and tried to figure out a way to do it yesterday, short of trying it "upside down" and nothing worked for me

[@rosalinebuccella9255]

I'm a lefty and I got it to work.

[@loveispeakincode1]

+Rosaline Buccella I have to coach myself through it almost every time I use it, but it can be done..But I am new to the the whole beading world so...yeah..left handed high five!

[@miztonijae1028]

Ashley Johnson me too. How are you doing now? Are you still beading? I've been teaching myself everything and it's taken me years to get where I am.

[@melaniebishop480]

i am left-handed and can use it. I am 64 and had to figure out how to use every kind of tool. just had to practice. i really love this though!

[@colmanmwero7473]

Can i know how to get that tool please?

[@Potomacbeadco]

Sure! Here they are! www.potomacbeads.com/shop?search=one+step+looper

[@colmanmwero7473]

@Potomacbeadco it's unfortunate that they told me where am I can't press my order because of shipping issues

[@ellenkoehler1859]

I love my Looper. Best tool I have.

[@aphrodisiaxe]

$30?! I would pay more for that looper simply because it would be so helpful.

[@honeybuzzard2843]

I like it, but I like the look of twists around my I pins. I also think $30 bucks is too much...should be $15.00 What A Rip Off..

[@Potomacbeadco]

Thanks!

[@debsam77]

Thank you I purchased a pair and its really nice!

[@almabendita5808]

Es muy útil como se llama para poder comprar Ojalá hubiera en PERÚ GRACIAS

[@Potomacbeadco]

Hi Alma, you can purchase from us online: www.potomacbeads.com/

[@ronapeters4974]

Pis would u pls help e how do u other this 1step looper l live in South Africa l can't fine them this my name is Rona l am willing to pay for it pls and thanks

[@Potomacbeadco]

www.potomacbeads.com/shop?search=looper

[@faithwiegand420]

What size looper fit theses 22 gauge 304 stainless steel open eyepins 2 inch (50mm?

[@Potomacbeadco]

www.potomacbeads.com/1-Step-Looper-Tool-2-25mm-p/9688.htm

[@veronicajohns2993]

Thank you for the presentation. What is the price range?

[@Potomacbeadco]

Thank you for watching! Here is the link for the One Step Looper Tool! www.potomacbeads.com/tools-supplies/9688.html

[@juliebergacker5680]

Great. 👍

[@usmc1927463]

Thank you, getting read to start necklace making this tonight.

[@socorrosierra3267]

Donde la puedo comprar

[@carollowe3704]

when i first used this tool, i guess i went too far with the press because it actually cut the wire so all i had was an open circle.

[@Potomacbeadco]

Don't worry we have made those mistakes along the way too

[@chargerchick4]

Plus one would still have open the loop to join them together so one would need to be changing tools all the time, far quicker and simpler(with a much nicer finish to just use round nose pliers. If you are anything like me then you can gauge the length needed so all your loops are the same size. Yet again pliers give you a huge range of sizes to make your loops where this limited to one size as other sizes are yet to come. This would just frustrate the heck out of me. Nice try but I will pass.

[@RoseKindred]

Has anyone tried this with 16g Copper wire? Looking for a way to make bails on pendants after there formed. I use looping pliers and also round nose ones, but looking for a more even size than my shaking hands can make.

[@ioanamartaki6017]

Μήπως εμπορευεστε το εργαλείο

[@lolodee3528]

Revolutionary, thanks.

[@Potomacbeadco]

You're so welcome!

[@innermosthealingsanidadint7651]

I just bought one.

[@laurelbuell5993]

I'm wondering if you mean the "easy ear wire maker" from FDJtool. item md100. I just ordered it, along with the wire looping tool. They both look so cool!

[@MissRenJ]

Are the loops big enough to link multiple eye pins you make together into an easy moving bracelet ....I'm worried will the loops be too small for this type of project??

[@esmeraldorivera7171]

It's still an outstanding tool for the beginner as myself. You must realize that everyone is not like you. A positive comment on your behalf would have been nice.

[@SouleaterOnyx]

is there any way to use this tool to "speed" your way through? like lining up all your beads on a wire, then cutting only what you need?

[@FriendshipChannel]

I am interested in where this device can be purchased from.

[@Potomacbeadco]

www.potomacbeads.com/SearchResults.asp?Search=1+step+looper&Submit=Search

[@pinksapphire.2262]

I bought one but I have not played with it much so thank you for the additional information

[@jajanesaddictions]

Do you have the wire looping tool? the one that makes ear wires? I need that one too.

[@myday1010]

Thanks I've been wondering what that is for...

[@VioletSkye19]

I was completely torn about 1 min into watching this, keep watching or leave KZbin and buy the looper .... KZbin... looper, Looper, KZbin ... decisions decisions ! 🤨🤩 thx for the great vid ! 😘😘

[@Potomacbeadco]

Either way, it is still a win-win situation ^_^ thanks you too.

[@paulalezotte659]

I really like this tool. I bought it in Dec. and it broke today.

[@pam3906]

Thank you for demonstration

[@Potomacbeadco]

Thank you for watching

[@karenallen5208]

I have this looper tool in three sizes. I may be making a mistake in the way I use this tool in that it doesn't completely close up a loop. However, it is a good starting point in creating a loop is to place my needle nose pliers into the partial loop and then finish closing up the loop. It is a great tool, though.

[@Potomacbeadco]

Thanks for sharing, that was very helpful! You are right, the tool does not completely close the loop but it is a great starting point for beginners or for people who have arthritis or other types of hand/arm pain. Thank you for watching!

[@anjalibahiwal2710]

Link please for buy

[@Potomacbeadco]

Hello there! Here ya go! www.potomacbeads.com/tools-supplies/9674.html

[@thanaahassan6814]

Where can I get this online? Thank you 🌹

[@Potomacbeadco]

More stock arriving soon: www.potomacbeads.com/SearchResults.asp?Search=Looper&Submit=Search

[@Iisadawn1048]

I just bought one off of Amazon.

[@cntrygal2007]

I wish Potomacbeadco was in Arizona! (The greater Phx area)

[@craftcooke1998]

I've just bought this its awsum

[@Potomacbeadco]

Awesome!. Hope you like it.

[@ghask11111]

where can we buy the fatima pliers

[@YumMinnie]

I'm sure to buy 1 of this, I'd been seeing this flier for a while since I started doing beadworks... i think it's really interesting..

[@Potomacbeadco]

Thanks for your interest on this plier. You can check it here: www.potomacbeads.com/Pliers-for-beading-jewelry-making-s/2502.htm

[@kitaro320]

That ‘loop’ as you call it is actually a ‘hole’.

[@lucianalimamaiasaldanha3430]

Bijoux

[@euvid1]

get all three sizes. It is a great tool

[@milagrostorregrosa7961]

Hola m gustaria comprar una por favor . Gracias

[@martinahinojosa325]

That is awesome ,I love it because I can do by hand that little ring ,I'm going to buy it, thank you so much for share with us your wonderful ideas.

[@Potomacbeadco]

Wonderful!

[@19marisita]

Yo quiero unas donde las consiguo

[@littletimeasweknowit]

I make rosary's and I find when making the bead with caps I could not get a snug fit.Is there a trick to it?

[@Potomacbeadco]

Hello! Allie will have a live event every Friday and she will be glad to answer this. You may also put some comments on that day for her to answer you your other beading questions.

[@gladisdiaz6593]

ola cuanto sale esta herramienta?

[@annalisacolonnelli1175]

Please, how can you put the ring inside another, as shown in the picture? Thank you!

[@Potomacbeadco]

you can simply take a pliers and open the loop (pull it perpendicular to the loop) enough to slide another loop in. You might benefit from watching some of our Intro to Wire Working (Part 1) videos

[@euvid1]

Excellent lesson. Thank you.

[@patga3244]

no envías a Cancún México?

[@Potomacbeadco]

Sí, enviamos a México. El costo es de $ 9,99, o, gratis en pedidos de $ 150 o más.

[@patga3244]

+Potomac Bead Company precio es en pesos mexicanos? y me puede dar los datos por favor a donde debo comprar esta pinzas

[@123simonjb]

which size looper would be best for making rosaries?

[@Potomacbeadco]

It really just depends upon your preference for loop size, but likely the smaller loops will hold more securely.

[@ruthhaynes1104]

Best demonstration i have seen for this tool! Saves me so much time!

[@Potomacbeadco]

That is wonderful to hear

[@MsKnittingDiva]

Having a hard time getting it to cut the wire on my short 17mm eye pins. Instead of cutting it creates another bend. Any helpful tips?

[@Potomacbeadco]

If you have eye pins that are too short, the tool won't be able to make the second loop after your bead. It's designed to firm the loop and cut at the same time, hence one step looper.

[@Jeni10]

I use wire looping pliers to make all my loops. The tool is one half round nose and one half concave. So much easier and less wire wastage.

[@kizmit6545]

WHAT IS THE DIFFERENCE BETWEEN THE YELLOW LOOPER AND THIS ONE?THANKS

[@Potomacbeadco]

The 1 step loopers come in a few different diameters, so the color indicates different diameter (loop) size.

[@KittenBowl1]

I think this could be a great tool for smaller beads to make connection parts, but not for large beads as it can’t get close to the large bead. Maybe when you have to produce lots of earrings or necklaces.

[@Potomacbeadco]

It is a great tool to make loops for earrings, also to make bracelets or necklaces with lots of links. Thank you for watching!