How To Use The Dr Beasley’s NSP Primer Polish And Coating System With Phil Miranda!

[@HeavenlyDetailz]

Thank you for taking the time to create and post this.

[@BigBear--]

Curious if you really need all three? 45, 95, 150? If you have a newer vehicle without any major paint damage (something like a Boost Blue '23 Civic Type-R)? Or can you get by (get away) with just full decon, clay, then just one pass with the 45, then coat? Also not sure what the Z1 is for?

[@FaizanSubhani]

been using car pro essence and what i end up doing is going around the vehicle and come back and wipe from where i started. and have coated it 15 mins after and i have had no issue at all. i havent tried other brand's primer polishes. i have pretty muched moved away from doing ipa and mostly use essence and has done good so far.

[@walenrod17]

Awesome, thanks for sharing!

[@walenrod17]

Do we really need to prep the paint before NSP?

[@autorecon8744]

Hello again have you ever used Koch chemise fine cut followed with dr beasleys z1 primer then ceramic coat over ? If so did you like the results. Thanks

[@Greg_P611]

Yes I have. The only thing you need to do if you use a traditional polish before using NSP is panel prep after the traditional polish & before using NSP

[@1stfrompuertorico568]

1st