This video goes over how to use the Drill Doctor 750X at MakeHaven, with Shop Manager Lior Trestman
Пікірлер: 112
@MurrayRose-j5c3 ай бұрын
I have the same model and really like it. One suggestion - use a black sharpie and coat the bit tip before sharpening it. You can then see that the whole bit was sharpened. Thanks for the video.
@lesschattermoresplatter57699 ай бұрын
Sheeple mask? I’ll quietly exit, hit don’t recommend channel and find another video to watch. On a side note… good luck with your transitioning 😂
@dginta79323 жыл бұрын
Good video thanks.
@Desertpeople-t7 Жыл бұрын
Don’t want to catch the coof in his shop with no one around😂
@jeremyvoegeli5628 ай бұрын
Just saying … Some people who are giving him crap for wearing a mask, you do know that if he is sharpening a carbide tipped drill bit then yes you should wear a mask. Carbide tungsten and other metals if inhaled can give you health problems and scar your lungs
@georgeowen2083 Жыл бұрын
Save your money don’t waste it on drill doctor upgrade to a vevor drill sharpener you can also do end mills.
@victoryvisiontour Жыл бұрын
This machine is great for non-splitpoint. However, I could never get it to split the point properly. I see you couldn't either. Anyone know how to make this machine split the point correctly? Or is it not capable?
@scothubbard53232 жыл бұрын
PLEASE EXPLAIN WHY YOU HAVE A MASK ON IN YOUR WORKSHOP?
@MakehavenOrg2 жыл бұрын
We operate 24 hour/ 7 day per week open community workshop. At the time this video was taken we were open for any members to walk through, we had a mask policy because covid numbers were high, this was also required by city and state regulation for any public gathering space. The video instructor was following our policy.
@cosmo7277 ай бұрын
@@MakehavenOrg That's no excuse. Be a man and do not comply with unscientific orders!
@gtgt39363 жыл бұрын
video about the drilldoctor is perfect. BUT Your mask is more than embarrassing
@bruceli9094 Жыл бұрын
He looks vaccinated
@Sasha8pancakes Жыл бұрын
Immediately stopped the video, I'd rather not learn from a clown that doesn't even respect themselves.
@mindthependulum62452 жыл бұрын
Take off the muzzle so we can hear you clearly.
@grndhg86d7 ай бұрын
But he might give himself a virus? I'm so confused
@orbitorsteve37427 ай бұрын
Yeah, breathe grinding dust. Our ears are full of shite.
@TheHumanSwissArmyKnife6 ай бұрын
Sorry can’t watch you with a mask on alone in the shop. Unbelievable 😢
@shepardthinks2 жыл бұрын
I am not part of the mask religion. I wanted to learn how to use the machine, absent virtue signaling.
@mwalczak56032 жыл бұрын
While a particularly good video superfluous information was added. This video should have been under 4 minutes. I would also recommend that he drill two holes one before and one after sharpening to demonstrate the effect.
@henrikm46572 жыл бұрын
The chuck positioning is really not well described and I always thought the white mark needed to be aligned with the notches. No wonder all my bits got butchered. Good video
@axelbrunn72963 жыл бұрын
Very easy to understand walkthrough! You saved me a bunch of time, thanks a lot mate!
@glenndavis2762 Жыл бұрын
where is your hand sanitizer and holster?
@fpvume5749 Жыл бұрын
For Not focusing on "saftey", I'm perplexed why you'd wear a face muzzle.
@77bubba006 ай бұрын
OK, I don't know what I'm doing wrong, but following your instructions, and also from several other videos, I just can't seem to get a 135 deg angle. I'm following the steps one by one and it still sharpens them all to a perfect 118 deg. I can't figure out what I'm doing wrong. Frustrating!
@tonycstech2 жыл бұрын
I bought one for my self. Not too happy with it because: Critical chuck areas are not molded very cleanly. Stock diamond wheel is too rough. You cant buy anything above 220 grit. This is especially bad for small bits where 320 is nearly a must have. Otherwise its rather impressive once you figure out how it works.
@bigj241921 күн бұрын
Thank you. I love you! You made me regain faith in Drill Dr. I've had it, over 10yrs with no success. The instructions are atrocious (probably because of bad translation from C-H-I-N-A.) Your instructions changed my view completely. Bravo! Can you flip-flop the cutting head on the 750x? My resharpened bits, throw metal more than the factory edges. I did a side by side test.
@Super_kracker_3 жыл бұрын
I've had my drill dr for almost 2 years and never used it because I didn't know how. I finally used it today thanks to your video! I thank you sir! My snap-on man is not so happy!
@transformer8896 ай бұрын
for 135 one notch to the right of 118, that was my problem, thanks for a great video
@katsomething36222 жыл бұрын
couldn't watch a guy standing by him self wearing a mask.
@jameslarson6555 Жыл бұрын
Yet you could reply, what a tough guy you are. I’m sure it was a robot holding the camera
@norkhach17159 ай бұрын
whatsapp with mask 🤧
@bobgregory6804 ай бұрын
Nice explanation and to the point. Did not know about the 135° being off one tooth to the right for this setting!
@jeffrichards50083 жыл бұрын
Does the mask keep you from getting metal in your mouth ? 😆
@nicholasmurray10002 жыл бұрын
leave him alone. His mom still packs his lunch on the short bus!
@jameslarson6555 Жыл бұрын
Amazing how hurt you guys get by something like a mask. Grow some
@DonnaMartin-u3j10 күн бұрын
Lopez Gary Rodriguez Jose Clark Donna
@joecollins18233 жыл бұрын
So far it’s eaten or destroyed 4 drill bits". Wonderful
@joeblow8716 ай бұрын
Hard to watch someone with a face diaper. Y’all ned to redo this video,
@RobertHernandez-t5q3 күн бұрын
Williams Nancy White James Johnson Ronald
@silverssonyoutube84383 жыл бұрын
I need this machine just to sharpen my 19mm . Machine here costs $550
@zorecati Жыл бұрын
I bought mine in 2016 and never used it. Watched this video and was able to sharpen a bit I was trying to use and it worked perfectly. Thank you.
@vipir06 Жыл бұрын
Whats with the mask? LOL sound is a mask muffle.
@bluesman6955 Жыл бұрын
Thank you so much. The grinding noise reminded me of a bad day at the dentist!
@Pidalin8 ай бұрын
I can sharpen bigger diameters just with hand pile or using sander, problem are small diameters like 1-2.5 mm which are very often wrongly sharpen from factory and it just doesn't work and this machine can sharpen these little diameters, so I don't need it. 😀 But for some diameters like 4-6 mm it could be usefull, because it's still too small to do it manualy, like it is possible, but not that easy.
@tbluge6 ай бұрын
Nice mask I’m out
@tylerseabook94235 ай бұрын
What’s with the face diaper
@tonycstech2 жыл бұрын
6:42 I like how you skipped the part of removing that useless cap.
@glennhoopman62123 жыл бұрын
Just GOT ONE & IT'S The Cat's Meow!
@NGHTRYDR2002 Жыл бұрын
Dude! I consider myself a pretty smart guy… BUT you saved me hours of anger and frustration! The instructions for this thing are worse than IKEA… Couldn’t figure out how NOT to screw up my dead bits. Just seemed to make them worse… Now all my bits are nice and sharp! Thank you!!!
@RyanMartinezUkulelelessons11 ай бұрын
Does he look at the sharpening stone at any point? Really could've used that info
@luffararnesugerkuk2 жыл бұрын
The eye will pick up if 135 or 118, if still uncertain a tip is to just simply add to standard nuts to each other and the angle you get will be 120 degrees, close enough.
@baaamakingbaaaa Жыл бұрын
I wonder if people look back and realize how ridiculous they looked with those useless masks on.
@gsgsgsgs3650 Жыл бұрын
I notice the cutting edge is slightly lower than the back part of the flute. What am I doing wrong. Tried 2 different drill doctors
@jerryanstey70584 ай бұрын
You make it sound so complicated ! Don't know if I want to buy one now !seems like a 7:39 lot of work !
@MarkNaylorMarkalign5 ай бұрын
I’ve had my drill doctor for years and didn’t use it out of past trying and frustration and one look at this video and presto, success and success, thanks
@jerryanstey70584 ай бұрын
How would you measure the angle on a 1/8 or smaller bit can it sharpen ? .
@Thomas63r22 жыл бұрын
On my drill doctor the center fin position is marked as 118, and it has slots to the left with "+" and slots to the right with "-" but in your video you say to go to the right for a 135.
@cyah97132 жыл бұрын
does the mask help spit from flying thru the internet and coming out my computer??
@summerodds52814 ай бұрын
No it’s used to expose cry babies online. What else should he do for you? You want to control what people wear right?
@danielww90222 жыл бұрын
Best instruction on this model. I was having fits before this video. Thanks.
@robertfan3327 ай бұрын
Excellent Instructional video. Very helpful. Thank you.
@RyanMartinezUkulelelessons11 ай бұрын
The bit misses the stone completely at every legnth
@brettmurphy61277 ай бұрын
How long does that diamond wheel last in one of those exactly?
@lonnytirri75193 жыл бұрын
YOU HAD THE BEST VIDEO ON THE DRILL DOCTOR 750X. YOU A GOOD TEACHER ON DEMONSTRATIONS IN THE DRILL DOCTOR THANK YOU LT SAYS BAM!! HOPE TO SEE MORE OF YOUR VIDEOS THANKS AGAIN
@lonnytirri75193 жыл бұрын
@Langston Cash I've used the drill doctor for 10 years. It takes a while to learn how to use it it's a sensitive machine. Once you learn how to sharpen the 115deg the 118 deg and the 135deg. Your skill level went up to the next level. It takes time. To do it. Don't give up. It pays off good once you get it. It will put a smile on your face when you graduate from the drill doctor. And you'll get more work done. Have a great day sir. REMEMBER IT'S A PRECISION TOOL SO BE CAREFUL OF IT IT CAN EASILY BE BROKEN IF YOU WORK IT THE RONG WAY. SO TAKE A DEEP BREATH AND YOUL GET IT YOUR FRIEND LONNY I'VE BEEN WOOKING IN MY DADS SHOP ALL MY LIFE I HAVE A LOT OF EXPERIENCE IN THE METAL SHOP PEACE OF MIND WORKS FOR ME
@HAMZA-NIAZI.659 Жыл бұрын
Mein ise kharidna chahta hun iski kimat kya hai aur kya hai ya Pakistan mein available hai
@Godofhouse2 жыл бұрын
I like the older models. Used like a 3 inch grinding stone and the split points on previous models aren’t confusing
@howardhudson9890 Жыл бұрын
Great instructional video! Thank you!
@joneveritt49508 ай бұрын
Fantastic video, demonstration, and teaching!
@sc185942 жыл бұрын
thanks, i was not gonna read that manual
@j1238066 Жыл бұрын
Good informative video, thanks 😊
@Douggg10002 жыл бұрын
Great instructional video.
@Dorozoro420 Жыл бұрын
Just got one in the shop didn't wanna read thanks a bunch for the video
@MakehavenOrg Жыл бұрын
Glad we could help
@Desertpeople-t7 Жыл бұрын
Vary good info!
@joet.4756 Жыл бұрын
thank you
@crystalortiz9930 Жыл бұрын
Thanks!
@geraldcharles16249 ай бұрын
Wears a mask when he's by himself, brainwashing completed.
@brian82642 жыл бұрын
No problem understanding him with a mask on; he must have had a reason for same.
@kevinkall85472 жыл бұрын
what about sharpening the side edges along the shaft? don't those also wear?
@TheHaloman17 Жыл бұрын
Only the bottom face of a drill cuts
@kevinkall8547 Жыл бұрын
@@TheHaloman17 you never use drill bits sideways to elongate a drill hole? I kinda do it all the time. Did it for a water line for dishwasher. Did it for a ethernet cable through the floor into the basement. Would be easier if the edges of the side of bit were sharper
@DDWRT8822 күн бұрын
@@kevinkall8547 that's what they make endmills for...... Machining 101.
@GMandHoldens2 жыл бұрын
I got the 750x as a present with excitement. The excitement wore off quickly after 8hrs trying to master the action of the cam rotation against the cutting wheel. I have concluded its a waste of time and drill bits.
@Tablesaw818 Жыл бұрын
The mask tells me all I need to know.
@jhart1352 Жыл бұрын
Hope he doesn’t catch Covid from the Drill Doctor. Believe the science they said.
@birdbrain2222223 жыл бұрын
loose the mask why do you have one on?? you sound like you are under water
@clintforrest45953 жыл бұрын
Why are you wearing a mask?? No one is in the room with you!!
@NotSeriousGamer3 жыл бұрын
The camera man...
@THCGRINDER3 жыл бұрын
Lol
@1stFlyingeagle3 жыл бұрын
But I am going to wear a BS mask that is worthless and show my insanity while showing the drill doctor.
@1stFlyingeagle3 жыл бұрын
@@acabral06 And wearing a mask is real ignorance of actual science facts.
@mikerama47243 жыл бұрын
My thoughts exactly
@jamesfarr53413 жыл бұрын
Omg take the slave mask off #billitary #jimminycrypto
@jimd35413 жыл бұрын
Come on losing the mask
@johnbailey96823 жыл бұрын
Fail you did not drill a piece of steel so how does one really know if it really did the job ? FAIL THUMS DOWN !
@gizzyguzzi8 ай бұрын
I wish I could find a comparison between the 350 chuck and the 500/750 chuck. And why are you wearing a mask, but no ear protection?