How to use the Emboss Tool in fusion360

[@theperson4614]

Thanks, I've been wanting to use the emboss tool for a while now but didn't know how to

[@3DPrintingGeek]

Hello Aryan, am sure this video might have given you some ideas to work on using this new Emboss tool in Fusion360. Best of luck man.

[@DPerry-uj8ge]

EXCELLENT!!! Perfect solution to Rhino's "flow on a surface" command! I love backdoors... Thank You!!!!

[@3DPrintingGeek]

Thank you so much D Perry, am glad you found this technique useful :) ... best of luck buddy

[@luxelinda]

Clear, concise, and exactly what I needed. Thanks!

[@3DPrintingGeek]

Thank you for the feedback Luxelinda, i am so happy it helped you. served my purpose of making this video :)

[@johnagorman]

Smooth, smooth work. Nicely done.

[@3DPrintingGeek]

Thank you so much John :)

[@Blackghouls]

The best tutorial. very well explained

[@3DPrintingGeek]

Thank you so much @blackghouls , so glad you found it useful.

[@stevelitt]

very helpful, thank you

[@3DPrintingGeek]

Am glad it was informative 🫡

[@kbshah]

Can you please show how to create a pattern roller, same like the one shown but repeated pattern on z axis. I’d like to create pattern rollers for using on clay

[@3DPrintingGeek]

Hi sangeetha,, i had done a video explaining exactly what you asked for. Do checkout my tutorials playlist & you gonna see it.

[@sam75131]

Share a link

[@leandronassa1831]

Great tutorial! Thanks a lot for sharing knowledge. : )

[@3DPrintingGeek]

You welcome mate, am glad you found this video helpful.

[@hodgeshodges9392]

ASMR Gold here!

[@3DPrintingGeek]

🫡

[@sam75131]

I will design this but unfortunately I don’t have a resin printer like u, I will try to print on fdm I hope the results r ok Thnx for the tutorial though

[@sam75131]

☺️🙏🏻

[@3DPrintingGeek]

Anycubic photons are really cheap now a days, they have amazing offers going on. Am glad you found the tutorial helpful. Wish you all the best 🎭

[@sam75131]

Ok will look for Cheap n good resin printers…

[@txlec99]

got this issue "one or more pattern instances could not be intersected......"?

[@3DPrintingGeek]

If you get such an error, it means your patterns are intersecting each other and you need to adjust them to get rid of the intersection.

[@LukeStephenson]

Thanks for the video...the trouble is that the pattern isn't perfect because when you had to choose between 17 or 18 instances in the circular pattern 17 instances left a gap, and 18 instances ended up overlapping too far. Is it possible to import an SVG and make it exactly the right size so that the start and end of the pattern match up exactly, creating a truly seamless pattern with no overlap? If so....how? I'm stuck on this on haha

[@3DPrintingGeek]

Yes you can do that but pre planning the diameter of your circle ⭕️ & designing the pattern with such measurements,so that it’s able to loop perfectly once it’s duplicated an “X” amount of time around the diameter of the circle.