ℹ️ How to use the Lightburn Material Test card with YOUR BASELINE SETTINGS. Full demonstration!

[@karenhadden4980]

This newbie really appreciates this! All this is so overwhelming at this point lol

[@Silent-G]

Rich’s videos are great!

[@TheLouisianaHobbyGuy]

Glad you liked it Karen!

[@JohnB3363]

I’m looking to get one soon and it’s very confusing to me as well. I’ve embroidered for 15 years and used the “pulse” program so I’m familiar with the tools and toolbar it’s the settings I’m confused on. I’m the type that if I get frustrated and can’t figure it out, I usually give up

[@merrillalbury8214]

Better videos than anyplace else, including lightburns own KZbin tutorials.

[@TheLouisianaHobbyGuy]

Thank you so much Merrill! 🌞

[@23names]

IT SEEMS THAT THIS GUY AND A COUPLE OTHER PEOPLE REALLY KNOW ABOUT LASERS AND HOW TO USE THEM IN THE CORRECT MANOR, IT SEEMS MOST PEOPLE EITHER DONT KNOW WHAT THEY ARE TALKING ABOUT OR THERE TECHNIQUES SUCK OR DONT WORK AT ALL, I HATE THE LIARS THAT CLAIM THEY ENGRAVED A LARGE DETAILED IMAGE IN 30 MINUTES OR LESS, I WAS READING AN ARTICLE LAST NIGHT, AND THAT GUY WAS SO FULL OF IT, HE HAD A DETAILED WOLF COMING THROUGH SOME TREES ON A 6 X 11 INCH PIECE OF SLATE, AND CLAIM HE DID THE COMPLETE IMAGE IN UNDER 7 MINUTES, WITH A 7 WATT LASER, I HAVE A 20 WATT AND ITS NOT POSSIBLE TO ENGRAVE THAT FAST, I HAVE WASTED A LOT OF TIME TRYING WHAT THOSE SO CALLED EXPERTS CLAIMS WORKS, THIS GUY AND A COUPLE OF OTHER PEOPLE REALLY KNOW QUITE A BIT, I HAVE NOTICED THAT EVEN THE PEOPLE WORKING FOR LIGHTBURN LACK KNOWLEDGE OR THEY ARE COMPLETELY WRONG, AND ALL THOSE PEOPLE THAT DONT KNOW ANYTHING JUST STRESS EVERYONE OUT OR JUST GETS NEWBIES TO WANT TO QUIT BEFORE THEY EVEN START, NOW THAT I DO THINGS MY WAY, ITS NOW FUN, NOT STRESSFUL, I HAVE BEEN CREATING SOME REALLY AWESOME ENGRAVINGS, I HAVE MUCH MORE EXPERIMENTING TO DO, BUT ITS A LOT OF FUN NOW, I HAVE LEARNED WHO TO AVOID OR NOT TO WASTE MY TIME WATCHING THE TIME WASTERS, YOU JUST WASTE TIME AND MATERIALS, SETTINGS THAT THE LIARS CLAIM AND THEY DO NOT WORK EVER, THE WAY THEY CLAIM

[@radutheimpaler62]

@@23names Oh My God!!! Learn what punctuation is! And all Caps? Is English not your native language?

[@skeith819]

This newbie is thrilled I found you!

[@TheLouisianaHobbyGuy]

Glad you're here!

[@yantschek4989]

you are the best teacher for lightburn. pls add more videos

[@georgechambers3197]

More good laserologist tips. 😁 Hope you're having a good vacation. Thanks for the video!

[@TheLouisianaHobbyGuy]

I am George, thanks!

[@sicciful]

thank you rich for this demonstration about test card cut and engraving.en beautiful weather, something to learn

[@TheLouisianaHobbyGuy]

Glad you enjoyed it Luc!

[@elijahharris4035]

The thing about your videos you break it down so people can learn I think your videos are some of the best out there hands down

[@TheLouisianaHobbyGuy]

Thank you so much Elijah! I really appreciate it! 👍

[@swantjegramann5875]

Danke! I struggeled yesterday using the material test in Lightburn, so I had to come back to your channel because I know that here is the help I need (as always).

[@TheLouisianaHobbyGuy]

Glad I could help Swantje! Thanks so much for the support!

[@ronaldderi7471]

I am a "noob" and have no actual experience. Have watched hours of youtube videos from dozens of people and I feel like Sargent Schulz from Hogan's Heroes. "I know nothing!" I have ordered one of those Chinese lasers, a Mecpow pro 3 10 w laser and am waiting for it to come in. I am an older retired guy and this is all new to me. I stumbled upon your channel and thoroughly enjoy it. I am working my way through your Light Burn videos and find that they are very well done. Your voice is well modulated and your delivery is excellent even without a script. I did join your forum but have not posted anything yet. It is not my goal to start a business so cost of materials, while a concern doesn't stop me from exploring various materials and having fun. Hopefully you will respond to this comment. I will check back later.

[@TheLouisianaHobbyGuy]

Awesome! 👍 Thanks for watching!

[@212nailbender]

Imo, One of the best video's I've seen. Thanks Rich, needed this! Thanks for the time you took !

[@TheLouisianaHobbyGuy]

Glad you enjoyed it!

[@robbo1415]

Thank you Rich, not only f or this, but for all your uploads. You’re an excellent instructor.

[@TheLouisianaHobbyGuy]

Thank you!

[@ALIC3FROMFPE1234]

congrats on your new purchase you will love the laser hobby! takes a bit to get-comfy but you will!

[@raider6511]

These videos are very helpful and AWESOME. Thanks Rich

[@TheLouisianaHobbyGuy]

My pleasure!

[@Kkkarlajane]

Thank you, thank you, thank you!!!!!!!!!!!! I almost gave up after couple of days of playing with my comgrow. I just felt so dumb. new software and new machine was overwhelming me already. I've been watching your tutorials and slowly things made sense to me.. Thank you!!!!

[@TheLouisianaHobbyGuy]

Awesome Karla! Glad to hear it.

[@medina3420]

WOW! Thank You Rich, So glad you pointed me here. I've watched about 40 of your vids now. I am a member in your forum and Downloaded your art. But I didn't see this, or didn't know what it was so I skipped it. lol I'm going back to find it now. You are a Great help my friend!

[@TheLouisianaHobbyGuy]

Welcome aboard Jason!

[@medina3420]

Looked in the memory card from Longer Ray and Well, Looky there , there was a material start list, speed and power. 🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️

[@rwe2156]

Yes, you're helping a lot of people like me, and I appreciate it, too. I've watched other tutorials and they go so fast no way I can follow it. I have to watch them multiple times. Obviously for the "younger" crowd!

[@TheLouisianaHobbyGuy]

Thanks Robert... our old brains work in 1st gear, so slow it is! 🤪

[@malcolmlee4723]

Hi Robert, I have 2 monitors and I run the video on one and Lightburn on the other. I can stop and start the video as required as I am following through doing the "task" on Lightburn.

[@davidelder5399]

Thanks for this one Rich! Both your videos on this subject have been so helpful.

[@TheLouisianaHobbyGuy]

Good to hear David!

[@isaacsmothers820]

You are such a calm, cool, relaxed, descriptive instructor. Thanks so very much for sharing your expertise and knowledge with us. I am learning quite a bit from watching your tutorials. Nice job and never dull. 😊

[@TheLouisianaHobbyGuy]

Wow, thank you Isaac!

[@isaacsmothers820]

@@TheLouisianaHobbyGuy Hello again LHG! 😁 How are you? I’d be brainless if I thought that you weren’t busy. Your experience and tutorials seem absolutely endless. I find myself viewing some of them even if I haven’t reached the point of using a particular skill. I feel that eventually I will need to know it anyway. Hobby guy, I’m goal is to learn with my XTool Pro in order to earn an income. Do you support yourself solely from your different machines (devices )? If so which one do you prefer as your bread winner? And how do I locate any of your lessons on how to successfully use my laser and/or Creality S-Pro 3D printer to generate income? Honestly my friend, you are a very gifted and talented person. And I love watching you teach us via KZbin. Thank you so much Hobby Guy!!! 😉

[@TheLouisianaHobbyGuy]

I used to support myself with multiple machines Isaac. I don't have any 3D printer videos up... yet.

[@mikaylagilman923]

Your videos are the BEST on KZbin for laser engraving, thank you so so so much

[@TheLouisianaHobbyGuy]

Glad you like them Mikayla!

[@terrydriskel9731]

. Hi Rich. Another awesome video. Thanks

[@TheLouisianaHobbyGuy]

Thanks so much Terry!

[@billb921]

This video the light bulb went off...😉 I watched your other test card video and yes a little confused being new at this, but now going back to watch it again Thanks!

[@TheLouisianaHobbyGuy]

Wonderful Bill!

[@stevepritchard7957]

Thank you so much for sharing your knowledge and expertise. I’ve watched a ton of KZbin tutorials since I purchased my laser but yours is one of the very. You narrate at just the right speed and clarity that’s perfect for an oldie like me. 👏

[@TheLouisianaHobbyGuy]

Happy to help!

[@lpaltageek]

Oh Golly, I have been trying to figure out where to start in setting speed/power for ever so long. I have Lightburn version 1.6.02. I have been using a Ruida CO2 100w laser. It was in a fire so my buddy brother purchased it, restored it, and put it in my garage for me and my sister to play with. It is now a 50w laser. I am going over your tutorial (more than once) and can't wait to get started. Thank you! Lucie

[@TheLouisianaHobbyGuy]

Have fun Luicie!

[@JZee49]

Another great video you make it look so easy.

[@TheLouisianaHobbyGuy]

Thanks John, it is! 👍

[@HouseDoctorRay]

Thank you very much! New subscriber and forum member. Lots to learn.

[@TheLouisianaHobbyGuy]

Awesome, thank you!

[@malcolmlee4723]

Thanks for this. I've just discovered your videos and greatly appreciate them.

[@TheLouisianaHobbyGuy]

Glad you like them Malcolm!

[@MrFinHD]

Thanks for he video! Why there is in material settings speed 2000/min but in the parameters was 4000 to 7000?

[@TheLouisianaHobbyGuy]

The manufacturer recommended 5000, so in order to get a range of engraving results, I chose to go below and above it.

[@MrFinHD]

@@TheLouisianaHobbyGuy yes i notised but down where you open material settings is only one parameter and it is 2000/min.

[@TheLouisianaHobbyGuy]

You can ignore that one.

[@CaptScott-ff6mf]

Thank you. Just getting started with my Christmas present, I was soooooo confused. This helps so much.

[@TheLouisianaHobbyGuy]

Glad it was helpful!

[@robertspina4503]

Thanks for the information I been wondering how to make a test card I am new to lasers

[@TheLouisianaHobbyGuy]

Glad I could help Robert!

[@cheftonyg777]

Guess I should have continued to watch the video ! your awesome, thanks

[@TheLouisianaHobbyGuy]

🤪 Glad you found it Tony!

[@philflo8575]

Very nice and helpfull, you are taking time to help people with precise and simple vocabulary, and a lot of humor. Many thanks to you, Hobby guy...

[@TheLouisianaHobbyGuy]

You're very welcome! Thanks for the comments!

[@christychessher1967]

Thanks for this in depth video!! I finally understand how to do it now.!!

[@TheLouisianaHobbyGuy]

Glad it helped!

[@chuckforbis4446]

Thanks for doing this one Rich. Very helpful, as are all of your videos!

[@TheLouisianaHobbyGuy]

Glad you like them Chuck!

[@stvcolwill]

outstanding video (as usual), my friend!! Thank you so so much.

[@TheLouisianaHobbyGuy]

Glad you enjoyed it Steve!

[@memyselfandlewii8781]

I loved it, the music on hold and the info is great

[@TheLouisianaHobbyGuy]

Awesome! 👍 Thanks for watching!

[@rustyp21]

Another great video Rich - Thank you!

[@TheLouisianaHobbyGuy]

Glad you enjoyed it David!

[@chacon5641]

Thank you again. I’m a newbie 😜 But I have experience designing but transfer my design to cutting is been a nice experiences.

[@TheLouisianaHobbyGuy]

You are so welcome!

[@meekaspearman2089]

Hi, I'm really, really new to laser. I'm so lost and I'm looking at the videos and yes, you are very knowledgeable when I'm looking to My Library and there's nothing in there. Am I missing something?

[@TheLouisianaHobbyGuy]

Try this video: kzbin.info/www/bejne/jIHYc6WonbeYmsk

[@raysalter6456]

Rich, this is do helpful for beginners like myself and pros, comgrow or the one, which would you choose...🤯🤯 thanks Rich

[@TheLouisianaHobbyGuy]

Both Ray! 🤪 I love all of my lasers....

[@Reb2734]

Great video thanks, I have been messing around and making marks but after this I believe I can really do this!!!

[@TheLouisianaHobbyGuy]

Awesome! 👍 That's good to hear!

[@johnnyspropshop]

Great video Rich, just watched it again while running tests on several different materials. This really is a game changer. Have a great weekend.

[@TheLouisianaHobbyGuy]

Glad it was helpful John!

[@marshallmndlovu5069]

Thank you very much for this video. Having watched so many tutorials and here you are having answered the simple basic question...are those numbers generated, were do people get them. Thank you once more, much appreciated

[@TheLouisianaHobbyGuy]

On my free forums. lahobbyguy.com/bb

[@warrenking1815]

Great video with clear communication. I am looking to purchase a new laser(not machine) just laser. My machine is currently an 8013 that has been used to destroy many peices of wood to learn how to engrave and laser signs

[@TheLouisianaHobbyGuy]

Can't help with that. I have no idea of the 8013 wiring.

[@TheFalconJetDriver]

Rich another Great learning video, you have nuggets in your videos that I am sure many miss. I have the Longer Ray 5 10 watt laser and the spot beam is .060 compared to many others as are .080. It was during this video you showed where to make that change to reflect a greater definition in burns with fill and I have not seen this mentioned on any other video that I have noticed. I have been playing with Lightburn for the last 3-4 years and in the beginning there were few videos so it was the shot gun approach to figuring thing out. I made a lot of projects but nothing special. I got bored and parked the Ortur laser master. a month ago I bought the longer Ray 5-10 with airassit. oh wow what a difference. I update my Lightburn there is so much more you can do today/ I have been digging into this like a rabid dog for the last month. everyday I learn something new. for an old retired guy it is good.😁🛫

[@TheLouisianaHobbyGuy]

Wow! Thank you so much! I appreciate the comments! A lot of folks miss the purpose of these videos which are the tips and tricks!

[@johndiego3105]

Excellent video!! I learned a lot from it. Is that Auburn colors? lol

[@ALIC3FROMFPE1234]

myself-war eagle

[@TheLouisianaHobbyGuy]

If you want them to be John! 🤪

[@rona1144]

I’m new to lasers and I find your explanation and method of delivery helpful. I have subscribed and am exploring your content. I especially like your templating. I find LightBurn is not intuitive but am grasping how it functions thanks to your helpful videos.

[@TheLouisianaHobbyGuy]

You'll be an expert in no time Ron! Like any software, there is a learning curve.

[@carolwolfe757]

Did you edit the text? My text cut out instead of fill. Thank you for the beginner video for the test card. Great help!

[@TheLouisianaHobbyGuy]

Yes I did, you have to check the settings before running it Carol.

[@ALIC3FROMFPE1234]

i really appreciate you sharing your knowledge with us! when i get comfortable doing a video you will get full credit on how i have learned! I've watched so many different people and you rich is the only person i can give credit!!! thank you!!

[@TheLouisianaHobbyGuy]

Awesome! Send me a link when you do!

[@SarbarMultimedia]

Great video. I'm new to creating this matrix and its well explained. I hear you say that the focused spot is 0.08mm x0.08mm (and its in the manufactureres spec sheet) but I notice your cuts are about 0.3mm wide. Why the difference?

[@TheLouisianaHobbyGuy]

The size of the kerf is determined by the precision of the focusing. I don't dial in the focus for the purpose of videos, so it can be off a bit. I doubt it was 0.3mm though. During the original testing when I focused on the focus 🤪 I believe I measured 0.09mm.

[@kevhodge9750]

right on the money rich just what was needed thanks👍👍

[@TheLouisianaHobbyGuy]

Glad it helped Kev!

[@bigcrazyal5560]

Thanks for the informative video, I needed this one.

[@TheLouisianaHobbyGuy]

No problem!

[@tdlgirl]

Around the 3:15 mark, you mention that we need a laser library to load... I have an OMtech AF2440-100w CO2 laser. Where and how do I load this to my library?

[@TheLouisianaHobbyGuy]

On my free forum in the members only section. lahobbyguy.com/bb

[@luvwud]

Thanks Rich nicely explained. Have you ever thought of listing in newbie order your videos to watch and post on your website, I'm fairly certain I've watched in the wrong order. Cheers Geoff

[@TheLouisianaHobbyGuy]

Go to the playlist called, Lightburn College.

[@luvwud]

@@TheLouisianaHobbyGuy Thanks Rich, that's a great help. Geoff

[@KuttersVideos]

Thanks for all your videos sharing your knowledge with us. I bought a sculpfun S9 and I'm setting it up today.

[@TheLouisianaHobbyGuy]

Enjoy it!

[@shootingscenes]

Hi Rich Love the videos. Just setting up a RM J630 laser. (I saw the review you did ). The J630 I have has been upgraded to a 90W tube. Want to do a Lightburn Material Test on 3mm ply. Can you give me a starting point for the settings. Previously had a Atomstack A20 Pro So completely different. Many thanks Roy

[@TheLouisianaHobbyGuy]

Good choice! Use the Lightburn Material Test. Laser Tools --> Material Test. Then pull down the drop down menu and use the pre-built Co2 tests.

[@shootingscenes]

@@TheLouisianaHobbyGuy Many thanks Much appreciate you sharing your knowledge

[@nudger44]

Hi rich, just been on your web page and their is nothing for the SCULPFUN S30 20W how would I change the settings for this please. Many tks. Keep up the great work. Learnt a lot from watching you.

[@TheLouisianaHobbyGuy]

Libraries are not manufacturer specific. Any 20W library will be fine as a starting point.

[@nudger44]

@@TheLouisianaHobbyGuy tks for the heads up on this 👍👍

[@sigh_of_the_times]

Enjoy your videos very much. I do have a question ⁉️🤔 When would you run any tests at 💯 percent power especially when all the manufacturer said it will quickly shorten the life of the Lazer. So why not stop at 90 percent.

[@TheLouisianaHobbyGuy]

I don't know what diode manufacturer says that. It's a Co2 laser you can't run over 70% power, and the ones that say you can, throttle the power in the controller. Yes, diodes will last longer at lower power, but the lifespan is so long, and the degradation is so slow, the laser will probably outlive it's welcome, or you'll want to move to newer technology before the diode degrades to point where you can't use it.

[@dawnbl47]

How do I change the text setting? It is so tiny. I have a sculpfun s10. I love your tutorials, I have watched a few and just joined your web page. Thanks for all the help to this very green engraver.

[@TheLouisianaHobbyGuy]

You can edit the test card.

[@brandylee7174]

I’m completely new and your videos have been fantastic helping me feel much more comfortable with my new machine but I’m still very much learning and very unsure of where to start on a lot . what if our library is completely empty? I just got a 60 Mira 7 and wow intimidating for sure

[@TheLouisianaHobbyGuy]

Search for Libraries on my channel Brandy.

[@clelljoseph]

Do you have any settings for 1/8in MDF? I haven't been able to find any. Thanks so much for all your videos :)

[@TheLouisianaHobbyGuy]

The test card will give you the settings.

[@emanuelpelleg281]

Hallo Rich. After struggling with the Boleans without any result I solved my problem using the Node Editing. This took more than 20 hours. I feel that an "Eraser" is needed: a function making it possible to draw a circle or a rectangle over a part of a design and, with one click, erase all that is within the frame of the eraser. If such a function is indeed not available in Lightburn ( I could not find) than, maybe, your connection to the developer can yield such a function. Please send me a link to your Patreon account! How do I sign into your Forum? Again my many thanks for your videos. Emanuel

[@TheLouisianaHobbyGuy]

Unfortunately that wouldn't be a feature, because you would end up with open shapes. Links are in the description below.

[@Mr99ZK]

I found this video to be quite useful. My Genmitsu Jinsoku LC-40 does not have a cut library though I suppose I could use one from a different 5w laser.

[@TheLouisianaHobbyGuy]

Yes you can.

[@mrsdizi1234]

Rich Thank you, Do you have a starting point for co2 60w Laser? I need help. for the material test Never owned a CO2. cannot find any info . Thank you as always.

[@TheLouisianaHobbyGuy]

Yes, on my free forums. lahobbyguy.com/bb in the members only downloads.

[@mikeledee8786]

How to I merge 2 cut libraries so I have the best of both. I have a d1 and would like to use your d1 10 watt and comgrow 10 watt files? Thanks

[@TheLouisianaHobbyGuy]

You can't merge them, but you can load them separately and go back and forth.

[@drakeangelheart]

I have watched a lot different videos on laser cutting and engraving and feel your videos are really some of the most informative and helpful ones around. Thank you so much!

[@TheLouisianaHobbyGuy]

Wow! Thank you so much! I appreciate the comment!

[@fazelhassan]

Thank You Rich for all your effort, you are a great help. Do you have settings for FOAM BOARD and MDF ?

[@TheLouisianaHobbyGuy]

Some of the libraries do, don't ask me which ones though 🤪 There are a lot of them on the forum Fazel.

[@fazelhassan]

@@TheLouisianaHobbyGuy Thanks Rich.👍

[@mrsdizi1234]

Are your speeds done with mm/s? Thank you again for all your help.

[@TheLouisianaHobbyGuy]

All diode lasers use mms as the industry standard.

[@reddsmorris7053]

Hello, Do you have to set the laser to the thickness of the wood to do the tests?

[@TheLouisianaHobbyGuy]

Yes, it has to be focused first.

[@kentharris7427]

I have a Creality Falcon 2 40 Watt Laser. The focal point at 40 wats is 0.15 mm. The engraving speed is 6000 mm per minute at 25% power for 2 mm Basswood. If I ramp up the power to 50%-100% wouldn't I get more speed out of the laser?

[@TheLouisianaHobbyGuy]

In theory, yes.

[@mrsdizi1234]

Thank you as always. I did find the one for 55w co2 will it help me as I have the 60w or is that completly differant? Sorry for probably a stupid question. Thank you Rich.

[@TheLouisianaHobbyGuy]

They're pretty close. Not much of a difference between the two.

[@mikepruett1745]

i like the brackets you have on it good idea .. also what program do you use for the video ..

[@TheLouisianaHobbyGuy]

Davinci Resolve Mike.

[@GilbertFlores956]

How do I follow this video if my material library is empty??

[@TheLouisianaHobbyGuy]

The answer is in the video.

[@daveat957]

Great video and other videos. I am new to this hobby and slowly getting up to speed. Quick question, I have the algo delta, 22w, optical is between 19.5 and 22w. Do you recommend the atezr 20w library or the Ikier pro 24w-40w. I understand I'll need to tweak but just wondering your recommendation. As i grow my library, i will share in the future Thanks

[@TheLouisianaHobbyGuy]

Try both Dave.

[@SvenPav]

Great video! What, if anything does the max speed and power under the cut settings editor do in this tool?? I would believe they should be greyed out or do we set the max power at 100% and max speed to infinity?? I don’t think they even function in this test….

[@TheLouisianaHobbyGuy]

I've never used them, so I can't say Sven! I'll take a look at them soon.

[@Optikification]

Sitting here watching this as i have my laser 2 days and all i manage to do is set my wood on fire lol or no marking at all. When do we need to change text settings?

[@TheLouisianaHobbyGuy]

Try watching the video again. I cover the settings and how to get them in detail.

[@cheftonyg777]

When I go to the library it empty! I have no option of wood to pick from. I'm using the lm3.

[@TheLouisianaHobbyGuy]

Watch the video again.

[@stevebowers1629]

I have an Ortur LM2proS2 with the LM2-4-sf module. I looked up the focal point and it says .17x.25mm. What I don't understand is when you selected the test card setup and you checked to make sure the LPI was 317, you stated that was a good setup for lasers with focal point of .8. You then proceeded to the Comgrow web site and saw that it was at .8. What I don't understand is how you knew that the 317 LPI was correct for a focal point of .8. Since my laser is .17x.25mm, how do I determine what the proper LPI and other settings are correct?

[@TheLouisianaHobbyGuy]

.08 Steve

[@radutheimpaler62]

All this advertising stuff, but not the link for the Universal Test that you said you would have here. Thanks for the great info as usual, but if you mention having the link it would be nice if you include it.

[@TheLouisianaHobbyGuy]

The UTC is outdated now since Lightburn now has the Material Tests built in. Laser Tools --> Material Test.

[@lpaltageek]

Back already. I have just created a Materials Library for Plywood, using settings in tutorial. I don't know where to find manufacturer for my Ruida CO2 50w laser. In Lightburn when I click on Devices it shows two entries: iLaser/GCode and Ruida/DSP. I pulled up an engraved photo that was passable and it shows LI 080 and DPI 317.

[@TheLouisianaHobbyGuy]

There are free Lightburn libraries in the members only area on my free forums Lucie: lahobbyguy.com/bb

[@vincentlekei1969]

This is very helpful 😊😊😊

[@TheLouisianaHobbyGuy]

Awesome! 👍 Thanks for watching!

[@vincentlekei1969]

@@TheLouisianaHobbyGuy hi You beat thanks 😊

[@stevebowers1629]

Hmm. Not according to their website. If I could send you a screen shot it says focal point .17x.25 mm. May I ask where you got your information from? The .05x.1. And how do I determine what the proper LPI is for that? I gather the values of .05x.1 makes it an oval shape rather than a true circle? If it is an oval would it make a difference on direction of engrave or being that it’s that small does it make a difference?

[@TheLouisianaHobbyGuy]

Half way down the page: ortur.net/products/laser-master-2-pro?variant=42164587790569

[@Ryan82288]

I’ve been trying to find the laser spot for line interval on Ortur for my Ortur laser master pro 2 and can’t find it. Is it .1

[@TheLouisianaHobbyGuy]

I'm on vacation right now, but I think it's. 08 x 1

[@christinachehade8231]

💯 This was so incredibly helpful! I have a graphic design background, but am new to lasers. I def ruined a few pieces trying to get the settings right. .. New subscriber here ❤

[@TheLouisianaHobbyGuy]

Glad it was helpful Christina! Thanks for the sub!

[@PeterWishart-o2o]

Love your video's just what a newbeeeeee like me needs thanks so much.

[@TheLouisianaHobbyGuy]

Happy to help!

[@anonymous-wx5xu]

Can I just buy one of your laser engraver?

[@TheLouisianaHobbyGuy]

🤪

[@SteveWoodrich]

Where/How do we find the library to load the manufacturers settings?

[@TheLouisianaHobbyGuy]

The manufacturers don't make libraries, I do. You can make your own by using the manufacturer settings which you should have gotten in a pdf file with the manual. Here's a video that will teach you how to make libraries Steve: kzbin.info/www/bejne/q6K9qqycmtqVhc0

[@sgaws]

17:43 how are you moving the laser ? oh i see your'e moving the curser 🙄

[@TheLouisianaHobbyGuy]

Click on the Map icon and then anywhere on the bed you click, it moves there.

[@chrisbabbitt2218]

Thank you for all of your content. I purchased a K40 because of you're videos. I just recently signed up for the forum and downloaded the material library for the k40 and was wondering if the line interval needs to be updated. Monport states to have a precision 0.1" or 0.254mm but the settings for engraving seem to be around 0.0800(mm) is this correct?

[@TheLouisianaHobbyGuy]

Yes, it should be between 200 & 254 LPI.

[@chrisbabbitt2218]

@@TheLouisianaHobbyGuy Just to be crystal clear should I change the 0.0800(mm) to 0.254mm?

[@TheLouisianaHobbyGuy]

No, the line interval should be 0.1, which would change the LPI automatically to 254.

[@chrisbabbitt2218]

@@TheLouisianaHobbyGuy thank you!

[@OldCurmudgeon3DP]

If memory serves, I had to edit the machine limits on my Z1 in firmware to get above 5000mm/min. I see you did similar to me for mounting the Z1. I made printed pieces instead of hardware store angles tho. I didn't notice whether the preview on the generator gave an indication of size. Would be helpful for slate coasters. Oh, just saw the Frame button. 🤦🏼

[@TheLouisianaHobbyGuy]

Thanks for sharing!

[@douglasmitchell4063]

Hi Rich. Your videos are awesome! I am using Version 1.3.01 of Lightburn. Should I have Bi-directional fill turned on when burning this test card? Also, should I have air assist on while engraving this card?

[@TheLouisianaHobbyGuy]

I almost always use bidirectional fill & air assist Douglas.

[@douglasmitchell4063]

Thanks Rich! That’s what I thought too, but I figured I might as well ask THE expert. I love your video! I always look forward to the next one! Thanks for responding.

[@TheLouisianaHobbyGuy]

Thanks Douglas!

[@Jasonmburden]

I have a laser master 3- how did you arrive at the .08 line interval ?

[@TheLouisianaHobbyGuy]

That's just the comfortable spot size that it engraves well at. The company says 0.5x0.1mm, but I'm getting really nice engravings at 0.8 LI.

[@nopriors]

You sound good on that keyboard Rich!

[@TheLouisianaHobbyGuy]

My clanks a lot! 😊

[@3DogsCustomEngraving]

Would the transfer tape work on fake wood ie like wooden signs?

[@TheLouisianaHobbyGuy]

Yes it does Robert.

[@3DogsCustomEngraving]

@@TheLouisianaHobbyGuy awesome thanks I ordered a roll. I can't wait to use it. Any suggestions on how to remove/cut through it?

[@deldavidson6493]

great audio and video.. you seem to be a person made to teach

[@TheLouisianaHobbyGuy]

Wow, thank you Del!

[@rte1Walter]

Hi I am also very new in this. In the Material test Generator you clicked on the down error by the box present, and you have all kind of items standing there. I have nothing also in Library you have a lot of items to pick, I have nothing. I have light burn 1.2.01 and also just purchased the key. What am I doing wrong?

[@TheLouisianaHobbyGuy]

When you run the test generator, you save the ones you make for future reference, so yes, it will be empty on first use. And the libraries are loaded by Lightburn, they don't come with the software. I have lots of free libraries on my free forum along with directions for members only: lahobbyguy.com/bb/

[@stevebowers1629]

Interesting. I see that but if scroll down to the technical specs just below that you will see the four different modules. The LM 2 10w shows what you stated. However the LM 2-4 LF shows the .17x.25mm. Minute differences but yet small enough to make a difference in details, isn’t it? But how do you determine what LPI to use?

[@TheLouisianaHobbyGuy]

You keep commenting on different videos. Just email me. [e-mail] The link I sent you was for the LF.

[@56thnbishop]

Do you have a video on squaring your honeycomb.

[@TheLouisianaHobbyGuy]

Just burn the square the size of your honeycomb into the waste board.

[@QuiltersHandyman]

When you set up the test card for cutting the default speed was 6000....you said "we won't trust this 100 and will change it to 80". Were you working in mm/sec or mm/min? I assumed the 6000 speed was mm/min (100 mm/sec) but the 80 you entered was what? also mm/min? which is pretty slow. I really enjoy your videos. I am trying to cut 1/8" hardboard with the 20W D1.

[@TheLouisianaHobbyGuy]

mm/min George. This was on a diode.

[@QuiltersHandyman]

@@TheLouisianaHobbyGuy I know that is what is recommended and what I use but the changes were ....well thanks for the reply.

[@TheLouisianaHobbyGuy]

@@QuiltersHandyman One was a cut test and the other was an engrave. 5W lasers typically cut at 80-200 mm/min.

[@robertspina4503]

Does GRBL offer a library to do a test card

[@TheLouisianaHobbyGuy]

No idea Robert.

[@CoastalBachelor2009]

My Max SPEED only allows me to go to 4724 and my "T" center is grayed out. The preview looks like a Bird wings outstretched.

[@TheLouisianaHobbyGuy]

Try posting on my free forums Scott. lahobbyguy.com/bb

[@mikeledee8786]

When I make a test grid for norton white tile, what am I looking for to get the best results? Example, do I look for the darkest, etc? Thansk

[@TheLouisianaHobbyGuy]

No, you're looking to get the most shades of gray so you can pick the color you want based on the speed and power.

[@mikeledee8786]

Thanks. What about black slate tiles?

[@TheLouisianaHobbyGuy]

@@mikeledee8786 Same idea.

[@mikeledee8786]

@@TheLouisianaHobbyGuy thanks