How to Use The Milwaukee Cordless Circular Saw

[@mikimauski]

You are a very good teacher. Thank you for all these details. Believe it or not I came here looking for how to turn it on 😅 Glad you covered it at the end

[@868_4_Life]

Saw a lot of videos on this but this one is concise, actually covers all the features of the saw very well and is extremely helpful. THANKS. Thumbs up and subscribed.

[@sheilaeish]

Thanks. I'm new to wood working and your videos are easy to learn from.

[@honestgbfan5324]

LOL I did not use my saw for quite a while. The box and bags inside were long gone. I could not find the Wrench to put on the blade and had to dig out my HUSKY Ratcheting Hex Key and Driver Bit tool. Which of course I had not used in quite some time so had forgotten that the holder for the SAE hex keys bits were safely stored within the handle and took me a while to find. Maybe I should not be using tools :( hehe Great video and much more information about the tool than other videos I had looked at. Thnks

[@rdg3686]

Very informative, I wasted 10-12 minutes looking for the short video. When I found one, it was not as descriptive or helpful as yours. My fault on being lazy. Thanks for posting this. Stay safe 👍🏼

[@k2director]

Thank you for doing this video. I just used it to set up my M18 FUEL saw...

[@looperdup]

Thank you so much! Saved my time reading the manual!

[@andrewkingjr.6356]

… my fifth video, trying to see which flange goes on first. I mistakenly dropped both flanges when trying to install a blade on my new Milwaukee, so the square one with rh radius ends goes on the outer side of the blade. Thanks! “liked” & subscribed.

[@City559]

Really really like this m18 Fuel saw. I have the bigger rear handle m18 but I like this one a lot better.

[@sreehill]

This is so, so helpful! I just bought a new Milwaukee tool set and came across your video. Thank you for the great information!

[@31pepito]

Thank You !!! Great videos covers each question I had in mind.

[@zocalo1990]

About the the guide for cutting straight..I was looking for that info.. good video, excellent should say ,thank you for taking the time

[@dianedufrene7071]

Very thorough and great pace

[@Piolin768]

Yes, thank you for showing all of this!!

[@tonexokeke1053]

You very good my friend. You explained both the features and set up very well. Thank you.

[@Prime_Spaces]

Yea, this video is it right here. Thanks my guy! 🙏

[@Sofire100]

Thank you for this! Very helpful 😊

[@DAINGUYEN-zh9lc]

Can you explain which blade for wood and which one for comment ..?

[@mayaalkan3748]

Thank you for this detailed video! it helped me a lot .

[@sacrajah]

Nice and precise. Thank you

[@rkong_mamalova69]

What about the knob on the left of the Allan key slot?

[@jackryder6732]

Very helpful sir. I have wired one 15a. Same features

[@PNNIMAN]

Appreciate the video,Great instructions and easy to follow.thanks”

[@herbertherbomoore415]

Do you use the 45° line for all of your bevel cuts, or just for the 45?

[@shammetje]

Simple and clear. thanks

[@bugvader]

So, i cant see the blade because sawdust and supposedly every now and then there are weakly supported cuts... even though iv had no issue and none of my boss's have either with support. Cant you just... keep it on the board and cut it like normal will a tiny amount of extra effort? And is that wprth the trade off of SEEING the blade?

[@jackryder6732]

Can you please do all features with wood to show us how its done and utilize all features

[@ermanakbay]

Awesome summary! Thank you

[@2BlessedAlex]

Mine keeps turning off mid cut on metal? Any help on that to why?

[@Passions]

Change your blade

[@robertduarted]

The height adjustment lever got stuck. It's not as easy to operate like the one on the video

[@carrolloutdoors4764]

Thank you!!

[@TristonSmith_ThePlumbingSmith]

Awesome vid man!

[@dalerounds4036]

What model # is this saw?

[@timluong8529]

Thank you bro for this life saving lol

[@chrischri6143]

thanks for the video!

[@johnroth8275]

Thank you

[@trahvac94]

Thanks

[@jasterable]

Your instructions are very clear. Your physical appearance made me feel i was watching some indian video and really thought i would barely understand but i did thanks!

[@Passions]

What an awful thing to say

[@miwaukeetoolsmeaengineer6169]

when Milwaukee tools launched, its quality was better, but after less than a year, they will definitely change switch(from Germany switch to HK/TW switch, even to Chinese switch, as you know, switch is most likely first to dead), change PCBA, change Japanese chuck to Chinese chuck, change critical parts to low the cost. Miwaukee tools have a VE team, 50 engineers to do the cost-down, during these processes, the quality would decline obviously.

[@georgedavall9449]

Rolling shutter in your video. It’s the ‘jello effect.’ Gave you a like for support, but you didn’t seem confident and that is important when using this type of tool. Safety, and respect, but confidence as well. The saw doesn’t appear to have been used at all. I don’t know? Stay safe and Healthy ✌🏻🇺🇸👍

[@esibrian81]

For Al Gore

[@Katman718]

Yeah show me a proper use when you're not wearing Band-Aids

[@barrywade944]

This saw is terrible if you want it to last leave it on the shelf!

[@sawdustandsurvival]

What makes you say that? I'm considering getting it so genuinely interested! What other similar size cordless circular saw would you recommend?

[@josephn9881]

Just got this one. Have many fuel tools. Get one on ebay for under $180

[@sawdustandsurvival]

They're quite expensive in the UK but still considered among the best tools with Dewalt and Makita (until you get to silly money territory like Festool etc). This saw is going to cost me £200 (about $255) but I'm tempted by the cheaper 165mm brushed model at £100. The attraction towards this is that I want to make things for the garden and occasionally do angled cuts and the extra depth of this 190mm blade. I already have batteries as I have a drill driver set with 2x5ah and 1x3ah batteries. Do you reckon I'm being silly considering spending double on this?

[@cheetocorleone3490]

you can tell this guy have never used a power tool in his life lol

[@benschwab8093]

Stopped watching when you referred to an alan wrench as an alan key

[@FriedGuy4200]

You mean like when he combined Allen wrench and hex key (short for hexagonal) and called it Allen key?

[@scottropp6402]

Button up your shirt and hide them nasty chest hairs

[@frankcienciala3328]

Thanks