Thank you for the awesome demo! It would be so handy if your pedals would have a Booster integrated like it's the case in OKKO Diablo pedals. This would allow even more minimalistic rigs because for many of us players especially the MAGMA57 and also RevivalTREM would need more output. Other than that, I'm very pleased customer who relishes his OE pedals. As you mentioned, John, the P/AMP setting works great in combination with a decent audio interface, DAW and DAW plugins for CabSim or IR-Loader and a PowerAmp-Sim. What works great is either using TwoNotes "WOS" which combines IR-Technology with integrated poweramp sim. (the more expensive option) or to use Igniteamps free "NadIR"-Loader and free "TPA-1" poweramp sim (the cheaper option).
@humorustrout.8 ай бұрын
Any speaker IRs you can recommend to pair with the Magma57? Im finding lots of options sound quite dark, even with the tone knob cranked up. Im using preamp mode
@dimitriskovaios2 жыл бұрын
A huge part of guitar amp tone is their loudness/volume, that's the reason they were designed back in those days after all. And the feel, the dynamic response the instruments gets with all that sound, when in front of loud guitar amp cabs can't be replicated with sims either analog or digital and full range monitoring systems. That said...they sound pretty spectacular, if you are used to hearing the guitar/amp/speaker/mic/full range monitoring system combination, when performing! Especially with analog amp style equipment like Origin Effects pedals!
@gcvrsa2 жыл бұрын
I want to build a stereo rig with the RD Compact as my main overdrive, then splitting into the Magma57 and Deluxe61 as my amp simulators. May as well toss in a Cali76 Compact Deluxe for good measure, and for boosts, give me a couple of Hamstead Ascents. :D For cab sims, I'll go with a couple of DSMnoisemaker OmniCabSim Deluxes. Keep it all analogue.
@RusticSpirit2 жыл бұрын
Run my pedalboard with my RevivalDrive into a Hotone Omni for cab sims. Awesome!
@Olliebear382 жыл бұрын
That was refreshing 😌 Fun! I mean that was fun.😁
@VelhosNovos Жыл бұрын
Great! Thinking of using with my CAB M+. Tks
@derekgonzales2 жыл бұрын
I'm curious about Blackface Fender-style CLEAN tones, AC30-style clean and pushed sounds going directly into a poweramp like this. Most of the demos of the RevivalDrive family of pedals I've seen focus on the DRIVE sounds and I wonder whether they've got some nice clean tones on tap as well.
@OriginEffectsUK2 жыл бұрын
YES! The RevivalDRIVE Compact is very capable for cleans tones. The volume control is like that of a non-master volume amp and it will clean up when set lower. Our Instagram has a growing number of sample settings and we've tried to show some of this off there. I recommend looking through our Instagram Reels to hear some demos.
@whitesocktheory2 жыл бұрын
Been doing it since the pedal/ came out. clean sound direct from the revivaldrive into a 4x12 . check it out kzbin.info/www/bejne/noiqYX6EaN6tbqM
@joshuafernandes49352 жыл бұрын
same here...not one video on you tube demoing clean tones or pushed clean tones using the revival drive...so maybe its not going at it , which is why no one goes into that territory ?
@faben708 ай бұрын
@@OriginEffectsUK Instagram sucks for this purpose, especially Reels. I browsed through them but I only found a couple of videos that were evidently about the RevivalDrive Compact because it's shown in the thumbnail and they were not about clean tones; maybe there are other ones but I can't watch them all and Instagram doesn not provide titles for reels.
@jessejohnson82102 ай бұрын
Is the Two Notes only being used for cab sim? Or is using any preamp/power amp modeling?
@OriginEffectsUK2 ай бұрын
It is just being used for Cab Sim. Our pedals are full amps, so they have preamp and power-amp simulation themselves.
@razifraship2 жыл бұрын
Hi. Do I need some sort of preamp between RD and PowerStage or I can just connect them together directly?
@OriginEffectsUK2 жыл бұрын
You can plug the RevivalDRIVE directly into the Powerstage. Just flip the RevivalDRIVE into P/Amp model on the POST-DRIVE EQ.
@ayiepong11 ай бұрын
I use revival drive compact with orange pedal baby amp sounds awesome
@bellsclubsbarsandbows763 ай бұрын
Can I place a delay and reverb effect between a RevivalDrive Compact and a Strymon Iridium if the RDC is preamp mode and the Iridium amp simulation is bypassed? In other words RDC-->Delay and Reverb-->Iridium
@OriginEffectsUK3 ай бұрын
Yes, you can. It'd effectively be an 'effects loop' type approach.
@bleeknoirАй бұрын
PLEASE PLEASE make a cab sim.
@timhopkins38102 жыл бұрын
Great video 😊 I’m really considering the normal or compact revivaldrive and have already got a two notes cab m so that would largely be how I’d use it in my studio. Just for my reference, we’re you just using a cab sim or did you use the power amp too within the cab m when playing in the demo?
@OriginEffectsUK2 жыл бұрын
We use the Redwirez BIGbox Collection. We usually use the 4x12 Greenback cab.
@timhopkins38102 жыл бұрын
@@OriginEffectsUK thanks for confirming 👍
@MusicFed2 жыл бұрын
@@OriginEffectsUK so you can effectively use these pedals as DI devices? in that sense are they comparable to, say, a Sansamp? thanks
@MusicFed2 жыл бұрын
@@OriginEffectsUK I've noticed you used the power-amp EQ option both when going to a power amp and going into a cab sim. I would have though going into a cab sim you wanted to use one of the 2 standard EQ modes?
@OriginEffectsUK2 жыл бұрын
@@MusicFed Running into a power-amp+Cab and running into a Cab-sim are, for the purposes of the P/AMP switch, the same thing. You can think of it as the pedal being a valve-amp and you're taking a feed from the amps speaker-out. So either you're then running into a real speaker cab, or you're running into a simulated speaker cab. Either way it's still a speaker cab and delivering the correct frequency response. The EQ1/2 modes exist for when you're running the RevivalDRIVE into the front end of a guitar amp. EQ1/2 are basically complex EQ curves and high-end roll off that knocks down frequencies you don't want your guitar amps pre-amp amplifying as it'll be very unpleasant and harsh.
@StereostupidАй бұрын
Sounds pretty darn good bro!!
@grlivesay2 жыл бұрын
Awesome tone. My question: can I run the Revival Drive Compact with my two Strymon Iridiums or would the RD Compact clash with the Iridiums amp & cab simulations? In other words does the RD Compact need a real tube amp to work?
@OriginEffectsUK2 жыл бұрын
We've seen plenty of people use the RD with Iridiums. Either set the EQ for whatever amp you're using on the Iridium, or turn off the amp sim on the Iridium!
@sons74298 ай бұрын
You might have answered this but can I put the magma in p/amp mode into other pedals before it hits my ox stomp?
@OriginEffectsUK8 ай бұрын
Yep, anything after the MAGMA57 would effectively be in an 'effects loop'. We have a dedicated OX STOMP video that provides all the info you need.
@patrickvici6929 Жыл бұрын
I have a similar pedalboard with my revival drive hot rod. How can I place my stereo delay after the Cab M? Line vs instrument level and then to DAW, I am missing something here 🙃
@OriginEffectsUK Жыл бұрын
You'll want to use the LINE OUT connection.
@ourPurple2 жыл бұрын
I just got my RD Compact. I am using the P/Amp mode with the pedal plugged straight into the instrument input of my RME UCX II. In Cubase I tried every cab sims in Helix Native and in Bias Fx. All I am getting is just a fizzy unsuable tone. To make the pedal sound good I have to put an amp sim in the chain and switch the pedal to Eq1 or Eq2. What I am doing wrong?
@lucabenedetti_gtr Жыл бұрын
i have the same issue and had a long, inconclusive discussion with their tech team. i have a real 62 fender deluxe and the amp line out (using an reamp DI box) sounds full and completely different than the P/Amp mode
@OriginEffectsUK Жыл бұрын
You shouldn't be having any issues with a cab sim and P/Amp mode. P/Amp mode simply removes filtering so that the pedal outputs a signal just as an amp would. It could be a routing issue, if the cab sim is set to a blend mode of some sort. The other thing would be whether the cab sim in cubase or your helix has a baked in preamp or power amp sim. Which could also result it it reamplifying the high end.
@OriginEffectsUK Жыл бұрын
@@lucabenedetti_gtr P/AMP mode requires the use of a cab sim, so if you're not using one you'll find the signal to be brash and full of peircing high-end. P/AMP mode is a completely unfiltered output, akin to taking a raw feed of a speaker-out on the back of an amp. The line-out on amps are typically placed after the preamp stage, rather than the power-amp. The RevivalDRIVE produces it's overdrive in its power-amp section. Some amp line-outs also have additional filtering in lieu of a speaker.
@sirslayer7220 Жыл бұрын
Hello, where is the riff from 5:57 coming from?
@OriginEffectsUK Жыл бұрын
This is being recorded with the DELUXE61 into a power amp and guitar cab. Miced with an M160 and SM57.
@basstobasscookingbrentbabi54112 жыл бұрын
I’m a bass player and I’m curious how I can work my signal like this? Any suggestions are greatly appreciated 🤘🏼
@OriginEffectsUK2 жыл бұрын
If you haven't already, it'd be worth checking out our new BASSRIG pedals. Specifically designed for Bass Direct Rigs
@indoornauta17 күн бұрын
Revival p/amp mode --> DI --> PA ????
@OriginEffectsUK17 күн бұрын
You would need some sort of cabinet and speaker simulation in your chain. You can buy Cabinet Simulations (like the Cab M) which have a DI out on them.
@richardwalley2862 Жыл бұрын
Dyson guy ruined it for this guy
@StereostupidАй бұрын
Would this sound as good in front of lets say a boss katana or a quilter interblock 45?!