How To Use Transistors In YOUR Projects! || Transistors Explained || Transistors As A Switch

[@bob2161]

So THAT'S how those little suckers work! I understood that they were basically a switch that was triggered electrically. I knew they were really fast. And that's the full extent of my knowledge of transistors. I knew they were NPN or PNP, no clue what that meant. In 9½ minutes, you have allowed me to grasp, what turns out to be a relatively simple concept. And you taught me how to use it. These are things that have alluded me for a long time. Thank you for your clear and concise explanation and demonstration. You bet I subscribed!

[@Bren39]

Thank you for the last minute explaining why one would use a transistor as opposed to just pushing a button. That's when it really connected in my head.

[@frankowalker4662]

Thank you for this series. For years I worked in a radio repair shop, all we ever repaired was valve radios and record players. So as a result thats what I'm used to working with and never understood transistors. The books I read were far too confusing. You give nice and easy explanations with practical demos.

[@xFalconFixer]

Frank, too many technical books do a poor job of explaining the basics. Many times, the simplest explanation is the best.

[@PaulGrodkowski-k3r]

What possible projects can anyone like me be thinking about if I am still stuck with that FUCKIN' Canadain dollar?😀

[@sky16678]

I finally found some lecture after searching for weeks which cleared the concept❤.hats off to u

[@LNCMD2023]

I thought valves went out of fashion long ago.

[@frankowalker4662]

@@LNCMD2023 Sort of, they are still used in guitar amps. But quite a few people, me included, still use them in general.

[@ruggedrick]

Great explanation. I'm a Certified Electronics Technician, and when I got certified many years ago, transistors were always the hardest things for me to understand. Seeing this video made them much easier to understand. So thank you.

[@SimpleElectronics]

I appreciate comments like this, thanks!

[@bobpurcell5662]

Very clearly explained. I thought I understood the basics of transistor operation, but your SIMPLE description of how each could be used (NPN VS PNP) lit the lightbulb. Also the use of resistor in the base circuit makes perfect sense now. Thanks. You've just earned a new subscriber.

[@SimpleElectronics]

Glad it helped

[@BrennanYoung]

Exactly the same with me. First time I've seen that base resistor explained in a way that made sense

[@timoshenko7846]

I have watched scores of videos trying to understand. Thank you. This is the best. It's like you were reading my mind.

[@petersmith5199]

Oh wow! After searching for days trying to find simple explanations like this that I can understand, here you are!! Absolutely brilliant. I've subscribed immediately and now I'm off to watch anything else you've uploaded! Nice people you Canadians!

[@SimpleElectronics]

Thank you for the kind words!

[@moepow8160]

I worked on electronics for years, but we followed a step by step building directions. I now am self learning how the components work and your way of teaching is my way of learning, I like it. I almost just the gun and asked what the he**, why don't I just use a switch...and then you rapped it up for me. Thanks for a very good video ! I'll be watching more.

[@BrennanYoung]

I've watched a few beginner/basic videos about transistors, and while many are good at explaining the underlying physics, all of them make far too many assumptions about the other components that they may be used with. This is the first (and best) I have seen because while it is far from exhaustive in scope, it shows the two basic types in two common configurations, with clear useful guidance about which side to place the load. Basic rule-of-thumb stuff that gets you moving, then gets out of the way. Bravo. I have subscribed.

[@daitedve1984]

It's like explaining how to drive, starting from scheme of engine. Interesting, but useless knowledge. Dan started from practical part: just press accelerator and move! :) That's why this video HUNDREDS times more useful than "pretty presentations" how electrons pass PN edge.

[@kenttimm]

As a kid I got interested in electronics seeing my uncle use a springboard kit, but every time I asked how a transistor worked he gave me some non-sence different answer that left me confused all my life about them (my uncle is a major jerk), I'm almost 58 now, and disabled due to a stroke, and your video finally explained it to me in a way that makes sense.. Thank you.

[@gowdsake7103]

That is by far the best explanation of transistor operation I have ever heard and I have been in electronics all my life

[@SimpleElectronics]

I appreciate hearing that!

[@larrybud]

This was an excellent beginner video! Getting back into electronics after 20+ years and this was an excellent visual. One thing which I learned (or didn't realize until now) was the reasoning for putting the load on the emitter or collector side.

[@daitedve1984]

That's the point! All diff is polarity of control signal.

[@locifer696]

My man, this video is awesome! I actually paused the video, drew the schematic on paper, and then tried it out myself after watching the video!! I just got a bread board recently and would love some beginner projects to start working on circuitry. Please make more just like this! Super informative, and I love the visual aids. Excellent work!!!👏👏🙌🙌🧐🔋⚡️⚡️😅

[@OnesmoPaul-xn1kc]

Something that has been bothering me for a long time is knowing the transistor. You are very blessed, you explain very well.

[@TheSenseiKai]

Now is this so difficult for a university teacher to do that as an intro to transistors? Thank you for the video.

[@josephlai9759]

Thank you so much. You make learning basic electronics so accessible to people like me who have been wanting to learn but don't know how and where to start. Hope you will inspire others to share their electronic expertise.

[@SimpleElectronics]

Thanks for the kind comment!

[@emichael06]

MY GOD I wish more electrical how-to videos would add the devices into their drawings!! Awesome sir!!!

[@21608617]

Thank you for making it as simple as possible. I loved it.

[@SimpleElectronics]

Glad you liked it!

[@stevehamann9624]

dude after all these years , 8:17 was explained me a lot about transisitors. And i think this is the best video how transistors works Thanks and keep up the good work

[@SimpleElectronics]

Thank you! I'm glad you found it useful!

[@gustavsjogren4894]

Thanks man! Im nearly 40 just getting into this stuff. Your explination made total sense for me. Thanks again, mate :)

[@grantscott1686]

I finally understand how transistors work and it's thanks to this amazing channel. Thank you!

[@SimpleElectronics]

Great to hear that! Thanks for stopping by!

[@grantscott1686]

@@SimpleElectronics Do you have any videos on how rf circuits work? I want to make a transmitter and a receiver circuit so i can make a 3d printed rc car lol

[@deang5622]

​@@grantscott1686 Don't bother. Just buy ready built TX and RX receiver modules. It is considerably easier and they can be pre-certified. You are not allowed to transmit on any frequency you like.

[@xFalconFixer]

What an excellent video, production, audio, and information. You are terrific in the explanation and how you present this material. I like your description(s) using the simple drawing, then switching to the real electrical components. I am a fighter jet mech (30 yrs), needing to brush up on my electrical knowledge. Electricity is not my strong point in my background/expertise. Thank you for all that you do for us! I wish we had KZbin 30 years ago; I might have picked this up sooner!

[@SimpleElectronics]

Wow - these kinds of comments are the kinds of things that makes my day! Thankyou!

[@grahamh7041]

100% agree with Falcon - thanks for considering us "visual" learners! .... hopefully, I too have "made your day" 😛

[@n0rth3rnlight]

Finally I got it! Transistors have kicked my ass for several days. Thanks for the very informative video.

[@SimpleElectronics]

Thank you for the kind words!

[@ahmadkhalidhotak9399]

very well explained transistors as a switch, to make it even more simple a transistor works as a switch when a small current is applied to its base it then connects its other two legs together or you can say it shorts the collector and emitter in order for the current to pass through it like a switch, and the type of current applied to the base vary according the type of transistor NPN or PNP. If the type of transistor is PNP, Negative side of the voltage should be applied to the base of transistor and if the transistor type is NPN, then positive side of the voltage should be applied to the base of transistor. Today is my first day to learn about transistors and this was the second video i watched on youtube for learning about transistors. correct me if i explained something wrong about transistors, i want to learn about them perfectly. Thanks in advance

[@deang5622]

No it is not that simple. You need to go look up transistor biasing, active and saturation regions, output characteristics curve, Ic versus Vce for differing levels of Ib.

[@maeander500]

Very clear and simple explanation of transistors.

[@HappyHermitt]

The best explanation of basic transistors

[@justinaspetkauskas3794]

Thank you so much...the thing about where the load should be saved my life!

[@andersson.l.e]

Nicely done. I'm looking forward to more of this.

[@danielmarkert1915]

Great way of teaching well done

[@RC-Heli835]

Thanks for sharing I think I can use your PNP and NPN phrases to help me remember. Once you attach a phrase to it your more likely to remember it 10 years from now even if you have gotten away from the subject a bit.

[@daitedve1984]

Dan, your video is the FIRST video about all those pnp/npn, which practically explain what to do with 'em. Thank you for simple lesson! Am I right that all diff between PNP and NPN is simply... *polarity* of a control signal? Make scheme with LED on the left or right of transistor is not a big deal.

[@zachcollier]

This is a fantastic video! So simple and clear. Thank you for sharing your knowledge and talents.

[@vestepharpersuasion]

You are a good teacher!

[@SimpleElectronics]

Wow, thank you!

[@rdavidwebb]

Thank you very much. This helps me understand a lot more. Nicely done!

[@simplelyf4072]

Thanks for this video helped alot. Your approach is great, not bogging me down with all the confusing details , just what I need to know !

[@YASH-qz6wt]

thank you so much for teaching us this clearly.it was very easy to learn because of you.You just earned a new SUBSCRIBER🥰 Hope you make more videos like this. You're awesome!😎 Thanks again.

[@djsupers2419]

Thank you for using a visual explanation, this helped me a lot!!

[@ralphacosta4726]

Good job. Until this video, I didn't understand why the base of a PNP needed low voltage to conduct, the opposite of an NPN. Thanks.

[@rdarst]

Awesome job dude, thanks for the timestamps. Also great explanation on using transistors with a micro controller. I haven't heard a great concise explanation before, and the visual really helped out!

[@ethansprojects7399]

Was struggling with remembering which one is which but your little trick helped, thank you.

[@SimpleElectronics]

I'm a tradesman, the less cognitive load, the better!

[@apathyreview3964]

Sub earned. I love the use of live components in combination with the diagram.

[@AndyInTheUK]

Wow! Thank you! Until watching that I had never understood transistors properly.

[@hermanadams6533]

Excellent presentation, I need more so I have subscribed and thanks so much.

[@ghostofgalileo84]

Awesome explanation. You answered my question I had in mind at the end of this video.

[@IS-77]

Good and easy explanation and demonstration, Thank you man

[@robertmyers6859]

FANTASTIC VIDEO

[@dennisjohnson8753]

Excellent video - very clear

[@grahamchiz6076]

Good video. Cleared up a few things for me.

[@lalanotlistening]

This explanation was the piece that was missing from my understanding. I was always putting the load on the negative end of the transistor and wondering why it didn't work like my intuition said it should. Thank you!

[@SimpleElectronics]

Glad you found it helpful!

[@deang5622]

Didn't know there was a negative end of a transistor.

[@ChalonPatton]

Easy explanation. Thanks.

[@derok7323]

you're underrated bro

[@SimpleElectronics]

Thank you, that means a lot!

[@goesintite]

Thanks for making that understandable for somebody farting around with electronics a little later in life!

[@SimpleElectronics]

It's never too late!

[@savvasntouzepis8621]

Very nice introductory video I would like to see more 😁

[@MrPierref4]

Finally, some enlightenment on transistors. Thanks for a lucid, logical explanation. Could you do a similar presentation on how a transistor works in battery charging, with the red and green LEDs in action? I'm not an electronics guy, just seriously interested.

[@SimpleElectronics]

It's a LOT simpler to just use a purpose chip like a TP4056 instead of just transistors but I could likely build a small circuit for basic charging with transistors

[@MrPierref4]

@@SimpleElectronics Thanks. Looking forward to it. There are quite a few videos on the subject, but none that include a circuit diagram and an explanation on how electricity interacts with the components used in the circuit. Most of the stuff simply has a music soundtrack without commentry. Leaves one absolutely mystified!😙

[@techdominant7932]

Very nicely explained and most informative video

[@octaviovillasenor6638]

Yes I understand now

[@rcavicchioni]

Great video. I'm looking forward to more of this kind of thing.

[@yv6eda]

Great tutorial, thanks!

[@kerry041]

This video helps me a lot! Thank you!

[@thomasschellekens5084]

Very practical. Very good.

[@xanoman1179]

"What the hell is the point if I have to click the switches anyway" I was always looking for that question, thank you very much for this video 🙏

[@ronalddhs3726]

Hi Thanks for the series! This was a bit to basic for me, but I am sure you'll move it on and keep explaining it as clearly :)

[@edgarguinartlopez8341]

You are a brilliant teacher! Thank you :)

[@GiC7]

Thanks, love the explanation , master.

[@salvatoreguiliano2429]

Hello , Thanks a lot for your Teaching, Explanations and Efforts. They are very illuminating for me. As a beginner i would like to ask, just depending on the Led light. Does transistor serve as a Switch between two Loads, switching them on and off? Does the Base work like a Contactor, Relayer , for one or more Components on the Circuit ? God bless you and your kind of People.🙏🙏🙏

[@LearnAgon]

One of the best 🎉

[@bensonideas295]

I Subscribed it .. Because of this video.....very easy to understand. ..

[@codyrap95]

Great explanation and thanks for the visual representation. I think this could have used some more practical examples, because LEDs can also be powered by microcontrollers so it's still kinda hard understading what you could actually use a transistor for, or how to pick them, what to look for, things like that.

[@odo6857]

at the end of material You said main reason why the heck transistors are so important - swiching higher frequencies. By the way it was best explanation (for me) what transistor realy do, at you tube.

[@mohankumarcud]

wonderful explanation

[@Hammadisteachingchemistry]

Clear explanation

[@seshachary5580]

very educative. Thank you Regards

[@rebandido777]

Hello, thank you very much for your videos! I have a question what are the values ​​of the resistors? I would like to practice at home thank you

[@SimpleElectronics]

The base resistor can be anywhere between 200 ohms and 10k ohms, depends on your transistor and your load. 1k is really easy to find so start there. For the LED - try 1k ohms as well and adjust it if you need more brightness!

[@rebandido777]

@@SimpleElectronics Do you know if I can control a tri color led (red - green) with both pnp and npn transistors; because I would like to switch from red to green with a single led, but the circuit confuses me because the tri-color led has a common terminal, thank you very much for your kind response

[@SimpleElectronics]

@@rebandido777 You will need to see if it has a common ground or a common power, and once you know that, you can install the appropriate transistors on the non-common lead. The type of transistor will depend if it's a common power or a common ground - make sure you pay attention what side of the load each transistor type needs to be!

[@rebandido777]

@@SimpleElectronics it’s common ground

[@SimpleElectronics]

@@rebandido777 So PNP it is!

[@emyrjones3027]

Hi😁 brilliant video, I've never done any electronics and I'm trying to learn 🥴, I'm making a wire buzer for my children and I want a green light for on but when the buzer and red lights are on the green light will go off 🤔 many thanks brilliant 👍👍👍

[@bencetuboly1734]

This video is awesome, I subscribed

[@lennox7647]

very well explained.

[@bikefarmtaiwan1800]

Good job !

[@garytann5408]

Just watched your video, excellent

[@RixtronixLAB]

Nice video, keep it up, thanks for sharing it:)

[@SimpleElectronics]

Thanks for the visit!

[@Maolana_ModiG]

Bro this is best video.

[@santaclase3410]

get well everbody 🥰🥰🥰 Thanks forn sharing🥰🥰🥰Thanks forn sharing🥰🥰🥰

[@johnaugsburger6192]

Thanks

[@daigriffiths6476]

Good one. Hwow about North. Points North and Never points North ? Compasses can be visualised that way. Thanks.

[@connorguitar]

thank you

[@mangarajupalepu6827]

Hi great video, can you also show the whole circuit like how you connect the gnd and where you connected it

[@jhaykingson5135]

Great job 👍 Thanks

[@onecircuit-as]

Great work! 👍😃

[@prasadkarlekar7856]

Thanks . Problem solved 🎉

[@fuzzballdasoft5889]

Thank You so much

[@absmustang]

Are the resistors of the same value? I refer to the resistors on the main and control circuit.

[@johnlabuci96]

great tutorial.. can u make another like this but for ic ?

[@macdaddyns]

Really good example,but I’m am now wondering how two concepts apply. Eric O, often talks about “high side and low side switching” is your first example a representation of high side and second one low side switching? And are the terms “sourcing” and “syncing “ applicable here? Thanks

[@SimpleElectronics]

Eric O from South Main Auto? Sourcing means providing a voltage and Sinking means providing a ground. So in my examples, the NPN is Sinking current (switching the LOW SIDE of the circuit) and the PNP is Sourcing current (switching the HIGH SIDE of the circuit).

[@jourdankisau3077]

Was helpful...

[@apathyreview3964]

I would love to see an oscillating circuit like at the end but sans microcontroller. Built just with transistors. And there are a LOT of people looking for the same thing. Maybe usi g a tank circuit or just clever connections between transistors.

[@DesmundAsamoah-nr5sg]

Great video

[@praneelmadhuvanesh3770]

haha love the points in perpetually and never points in memory tool!

[@markny8467]

Great video. I want to turn on /off a relay based on a resistance that becomes zero or 45 ohms. (The relay is very small and needs 12 volts to 16 volts to operate) How can I use a transistor with this varying resistor? I will try to make it but would like some expert's opinion and design. Thanks

[@SimpleElectronics]

I am far from an expert - but I recommend asking in the AskElectronics subreddit - but make sure to share your full project, as to avoid X Y problems. www.reddit.com/r/AskElectronics

[@ITSME-pw8yb]

Hats off

[@kabadik9017]

Tq v much

[@mipa3868]

at 5:08 ,sir , are we using a common base configuration?......can we make the same functionality with common emitter/common collector?