How to use Ubiquiti's UniFi Talk with VoIP.ms!

[@yourpcmd]

Heres an issue. Everything is correct asfar as all the settings following the guide to the letter, yet, when I go to call the DID number, it immediately disconnects.

[@deejayentel]

im having this same issue aswell

[@destituteirl7614]

@@deejayentel anyluck, having it now, 7 months later

[@deejayentel]

@@destituteirl7614 yes I did manage to get it working. Talked to ubiquity and it was an issue on the operating system end and they pushed an update a week later. If you have the issue update firmware and do a full power cycle of all your hardware.

[@Gavilaso]

Thanks! I just notice that you can’t make calls ext to ext if you have sub accounts.. have you try it?

[@paultech9385]

Could you do a video on setting up Unifi talk with their service, setting up the subscription and how billing works? I’m about to do this in the next few weeks for a client. A follow up video on porting to another service later on would be helpful. Thanks.

[@jimmyjames2944]

Have you done a video showing how to use UniFi Talk with Skyetel? I have tried several tutorials with no success. Thank you, James

[@dukeseb]

Can you confirm which UVP Phone model you have...... Is it the UVP or the UVP-Touch...... ive read the UVP wont work on the UDMP and i want to pick up a phone used and make sure i get the right one

[@alexgriffith5161]

Awesome, thanks. I had missed the incoming call setup when I tried to do it

[@shylohchavez6825]

Thank you so much for sharing!

[@resipsaloquitur_esq]

If you do this, do you still have the $10 per line charge from Unifi?

[@e5sigmatutorials346]

No you do not

[@deejayentel]

anyone have issues with the phone assistant just hanging incoming calls?

[@yr1309]

Would super duper appreciate it if you can upload a video showing how to integrate an existing PSTN/analog Telco line with UniFi talk system using a FXO gateway (for example grandstream GXW4104) Thank you so much. Nice content always 😊

[@rbakshi64]

Does phone flex work with third part sip provider. Just subscribe to your channel. Thanks

[@scytob]

yes

[@richard-west]

Can you show use the setting you have used for SignalWire? It looks like you already had this setup, but we only got to see the voip.ms settings. I am having no luck getting SignalWire to work which seems crazy since Unifi Talk is based on Freeswitch, and that is made by Signal Wire.

[@e5sigmatutorials346]

We're currently in the process of working with SignalWire to iron out some issues with outbound calling. As soon as everything is good to go, we'll make a video showing how we've integrated with them as well.

[@richard-west]

@@e5sigmatutorials346 thanks!!!

[@richard-west]

@@e5sigmatutorials346 any update on getting UniFi Talk to work with Signalwire?