How to using Courseplay for grass work and custom field boundaries

  Рет қаралды 71,821

Farmer Klein

Farmer Klein

Күн бұрын

Пікірлер: 118
@hoffi6792
@hoffi6792 5 жыл бұрын
Your cp tutorials are great! It's easy to understand everything
@finlayjones714
@finlayjones714 4 жыл бұрын
awesome videos! perfectly explained tutorial, before watching it looked rather complicated but now i see it is rather simple, thank you my good sir!
@FarmerKlein
@FarmerKlein 4 жыл бұрын
Glad it helped!
@chastuk
@chastuk 5 жыл бұрын
Remember doing exactly this way with Courseplay in FS17. Nice vid and explanation of new courseplay features.
@eddiewinehosen6665
@eddiewinehosen6665 3 жыл бұрын
One tip when doing field with this much space around them is to skip headlands and just do up and down runs with turn on field deactivated. That way you can send of the next tractor with it's equipment sooner since they never cross paths. Headlands is really only useful when you have tight space, hedges, trees etc in close proximity to the field.
@bif9745
@bif9745 3 жыл бұрын
That demoniac fail just at the end of your explanation ! Great tuto by the way. Learn to define a custom work area.
@daniel00120012
@daniel00120012 5 жыл бұрын
This will completely change the way I play. Thank you!
@22manbearpig
@22manbearpig 4 жыл бұрын
Been watching your vids last couple of days to work out courseplay ins and outs been super helpful. Thankyou and subscribed.
@FarmerKlein
@FarmerKlein 4 жыл бұрын
Welcome aboard!
@fragdad
@fragdad 5 жыл бұрын
Loved watching all of these course play videos. Thanks for sharing
@aseroxd
@aseroxd 4 жыл бұрын
Your tip about custom field boundaries was really helpful. Going to try it out on No Man's Land to try and make things a bit easier.
@FarmerKlein
@FarmerKlein 4 жыл бұрын
Glad it was helpful!
@quaddy3431
@quaddy3431 5 жыл бұрын
Hey, man good video. helped me out remembering some things. Just one thing if you use courseplay in conjunction with follow me you can make silage bails following the windrow courseplay course... I've done if in FS17 & now FS19 works well... Good luck have fun...
@Cinnamon_Shaey
@Cinnamon_Shaey 4 жыл бұрын
thanks alot, this series has helped me alot, as completely new to the whole FS series i am a complete noob xD
@ecjfla44
@ecjfla44 5 жыл бұрын
Great vid, had no idea about modifying the size of the field. I frequently cut off L shapes and make them rectangular or square, and CP wants to do the original field. 👍
@medicms2001
@medicms2001 5 жыл бұрын
Really appreciate these videos. Very easy to follow along and understand. Thank you
@xtymtscm6193
@xtymtscm6193 3 жыл бұрын
when you were trying to get the rake's course generated and it kept putting the starting point on the other side of the field, it's because you had the ending point set as the current vehicle position so it kept ending the course wherever you had the tractor
@Svenn-vo7ev
@Svenn-vo7ev 5 жыл бұрын
Thank you Farmer Klein. love you work.
@bryanm214dallas
@bryanm214dallas 5 жыл бұрын
I’ve had very little play trying to study your work ! Lol course play is worth it , so thanks again for your videos
@kreed1004
@kreed1004 5 жыл бұрын
no way I can add a course to the first one? you're a sauce boss sir
@jturie
@jturie 5 жыл бұрын
Well done as always. Now that CP is out, I can start playing 19. Just haven't been into it.
@minto4390
@minto4390 5 жыл бұрын
Nice video one feature that might help out you can have them skip up top 3 lanes so they dont have to turn so sharp and back up as much if at all.
@FarmerKlein
@FarmerKlein 5 жыл бұрын
True, That is a function I haven't used much and never occurred to me.
@bucket1442
@bucket1442 5 жыл бұрын
Hired help is like V1.0 Ai Vehicle Extention is like V2.0 Courseplay is V3.0 it so great.
@jutty5556
@jutty5556 5 жыл бұрын
I noticed CP has a major issue with that wind-rower, if you use one of the rotary ones, it does fine
@hakanarvidsson5898
@hakanarvidsson5898 4 жыл бұрын
you are wery good instructor well done
@FarmerKlein
@FarmerKlein 4 жыл бұрын
I appreciate that!
@FilippoDeLuca
@FilippoDeLuca 5 жыл бұрын
Thanks for sharing this! great info
@alfydungarees2014
@alfydungarees2014 5 жыл бұрын
Just brilliant as usual
@danieldrives8619
@danieldrives8619 5 жыл бұрын
Good video mate! I made a courseplay turorial too
@BW-0217
@BW-0217 3 жыл бұрын
How does field supply work? Does it just go get seeds or fert and come back ro the field? Or does it go out into the field and fill whatever is needed?
@FarmerKlein
@FarmerKlein 3 жыл бұрын
That mod does not ring a bell. I honesty have not kept up with CP since these videos my general gameplay no longer involves its use. For me it became to inconsistent there for a while but supposedly its alot better.
@umquart
@umquart 5 жыл бұрын
I am seeing it too, in my gameplay. Like in this video, when vehicles have made the Headlands, they stop,
@FarmerKlein
@FarmerKlein 5 жыл бұрын
I'm sure they will get it figured out.
@wilsonchandler
@wilsonchandler 3 жыл бұрын
How do you fix the speed issues on combines ? Cause my combine header can let my combine go 12mph but my combine won’t go that speed it’ll 8 mph how do I fix that ?
@Submanca
@Submanca 3 жыл бұрын
Everything is great but I wish you would have shown how to pick up the bales by using the offset.
@FarmerKlein
@FarmerKlein 3 жыл бұрын
Honestly i don't k now how well that would end up working out given how bales often shift when dropped out of a baler its one of those tasks that probably ends up being more trouble than its worth.
@Submanca
@Submanca 3 жыл бұрын
@@FarmerKlein Good point
@keithbateman8489
@keithbateman8489 4 жыл бұрын
How would you use CoursePlay, with auto generation for mowing the grass around with field without actually going onto the field. i.e. if the field has a crop of corn but you wanted to mow the grass around the outside areas. Currently I do this but recording the whole exact course, I am just wondering if there was a way to just plan the outside course and exclude inner parts with Auto Gen?
@FarmerKlein
@FarmerKlein 4 жыл бұрын
interesting idea. not sure on this myself.
@wvjoe821
@wvjoe821 5 жыл бұрын
if u said it im sorry i missed it but how did u get the white lines that show the course he will follow over the field? also a question unrelated to this video how do u pull up the log when ur starting a map up? thanks for all of ur assistance
@FarmerKlein
@FarmerKlein 5 жыл бұрын
I definitely show how to have it show all the points in between the start and end but I do not know if it was this video. Likely one of the earlier videos in the play list. I cant recall the exact screens from memory. The log is enabling the dev console which I did a how to on very early on. might have been my first FS19 vid. Its a quick edit of a text file in your Farming Simulator 2019 folder.
@wvjoe821
@wvjoe821 5 жыл бұрын
@@FarmerKlein ok thank u for the help
@ChancellorLott06
@ChancellorLott06 5 жыл бұрын
Is there any features to make this more balanced like adding a worker cost while vehicles are running or anything like that? or the cost of a GPS like in that GPS mod.
@FarmerKlein
@FarmerKlein 5 жыл бұрын
Courseplay does have its own hired helper cost. or you can chose to not pay your workers with courseplay. You decide.
@jojoskunk
@jojoskunk 5 жыл бұрын
Oh, my fav mod of 17 is back... yes! Is it on the in-game mod hub yet?
@FarmerKlein
@FarmerKlein 5 жыл бұрын
Joel, i don't expect to see it on the in game mod hub for a very long time. The 19 implementation is still a bit buggy and is under heavy development still. Those using it should do so under the understanding there using early access software in that all features may or may not fully work as expected.
@LowJackAP
@LowJackAP 4 жыл бұрын
can you set a course to skip every other lane? say you want to use 2 tractors with the same tools on a field, can you do that?
@novcon
@novcon 4 жыл бұрын
I like using corseplay, but every time I start it, even with just one tractor, Everything starts moving at a crawl, even other tractors not running courseplay. Do you have any suggestions on how to fix this?
@FarmerKlein
@FarmerKlein 4 жыл бұрын
Be sure you have the correct work mode selected.
@rlrihards948
@rlrihards948 2 жыл бұрын
Thanks!
@colinlongstaff
@colinlongstaff 5 жыл бұрын
Good video mate!
@helioacid8182
@helioacid8182 5 жыл бұрын
Thank u good sir very detailed
@williamchapman9292
@williamchapman9292 3 жыл бұрын
Nice
@stanleyjones4180
@stanleyjones4180 5 жыл бұрын
thanks for the video on this
@grandpasgaming5232
@grandpasgaming5232 5 жыл бұрын
Thanks again!
@verios44
@verios44 5 жыл бұрын
Very helpful! How would I setup two harvesters and link their courses?
@FarmerKlein
@FarmerKlein 5 жыл бұрын
That will be coming in a later video. I need to first make sure that functionality is working in the 19 version as not all functions from 17 are working in 19 at the moment.
@verios44
@verios44 5 жыл бұрын
Farmer Klein thanks, I was just hoping to setup more than one harvester. I play on honey dew xl and the smallest fields are 6 ha, largest hundreds
@FarmerKlein
@FarmerKlein 5 жыл бұрын
@@verios44 A multi harvester video with two harvesters and two overloaders to a single semi is coming once they fix a few things. Last time I tried i was getting lua errors when trying to set it up.
@jayjayrin3080
@jayjayrin3080 4 жыл бұрын
I did everything that was said when it comes to recording a course and setting the boundries for the desired field, but when I go to generate the loaded course it says"couldnt generate course. Try changing the setting or moving the vehicle"
@FarmerKlein
@FarmerKlein 4 жыл бұрын
maybe make sure your in the right work mode or you have it set to start from vehicle location try setting it to start based on something else. Beyond that I dont know what to tell ya. I havent used courseplay in months myself.
@3sis344
@3sis344 4 жыл бұрын
Try to put END point before the start point with +- 3m gap. I had same issue, but this helped. I just started the course with "work mode" and finished the course with 2m gap before the starting point. Then after i SAVED it I just pressed Generate course and it was fine ... Do a small field first for just a quick testing, one small round that doesnt even have to go around whole field just to test it. It might work with the START - END point gap. Dont overlap it and it should be fine.
@jayjayrin3080
@jayjayrin3080 4 жыл бұрын
@@3sis344 thx it worked ^_^
@3sis344
@3sis344 4 жыл бұрын
JayJay Rin happy to hear that :)
@Cavediver86
@Cavediver86 4 жыл бұрын
"IF courseplay had a fault" hahahaha I busted up laughing at that one. But to make it better a few moments later the tractor backed up over the bale. Course play is a great idea but it's more trouble than it's worth.
@FarmerKlein
@FarmerKlein 4 жыл бұрын
There are days I would agree
@trevorsmith7918
@trevorsmith7918 3 жыл бұрын
I wish they had numbers on them as don’t know the order to watch
@falconauii
@falconauii 5 жыл бұрын
how do you get the courseplay hud to come up. I tried right click on mouse but no go
@FarmerKlein
@FarmerKlein 5 жыл бұрын
If the bindings have changed they would still show in the F1 menu. It might be that its not activated properly? It also only comes up when your in a vehicle.
@TheIronDrengin
@TheIronDrengin 5 жыл бұрын
FK .Would the Custom Boundary work for merged fields too? Or is there an alternative method for this? TY
@FarmerKlein
@FarmerKlein 5 жыл бұрын
It can work but if you merge the field CP should pickup on that next time it scans the fields. Click the eye icon to see the blue line to check that it has picked up that change.
@TheIronDrengin
@TheIronDrengin 5 жыл бұрын
@@FarmerKlein TY. Still learning this stuff.
@kreed1004
@kreed1004 5 жыл бұрын
someone tell me why this isn't all out there already? is there a proper manual for this mod?
@FarmerKlein
@FarmerKlein 5 жыл бұрын
I believe there is some level of documentation on the courseplay github site. Its not out because it is still in development. This is a very complex script mod that takes quite a while to work out the kinks.
@helioacid8182
@helioacid8182 5 жыл бұрын
I'm sure u will make a video on this anyway but how to get the combine to unload using courseplay
@FarmerKlein
@FarmerKlein 5 жыл бұрын
yep thats coming soon.
@mzali.ac14
@mzali.ac14 5 жыл бұрын
Is there anyway we can have a tipper follow the combine n being filled simultaneously n then go n unload in the silo once full n get back to do the same? Is that possible?
@FarmerKlein
@FarmerKlein 5 жыл бұрын
That should have been covered in part 4 the other day where i did a unload course. Where it detects the harvester and then empties the harvester and then once the trailer is full goes to the silo to empty and back again. Im waiting for CP to get a little further along to demonstrate a larger 2 harvesters, 2 overloaders and a semi as well as a fully automated silage harvest.
@mzali.ac14
@mzali.ac14 5 жыл бұрын
@@FarmerKlein Yeah I saw that but that tractor course to unload in the silo. I'm not able to get that and sadly you did not show that in the video as well as to how to get a tipper trigger set for the unload. If you can make that. That'll be much help.
@FarmerKlein
@FarmerKlein 5 жыл бұрын
@@mzali.ac14 Ah ok I see the issue. The course setup is the exact same as the refill courses. You start at the field edge or inside the field then drive to the silo and over the dump point. i slow down a bit when i go over the dump point and then loop back to the field and stop the course. then pick the second work mode for combi unload, pick the harvester vs letting it do it automatically and then it should work.
@mzali.ac14
@mzali.ac14 5 жыл бұрын
@@FarmerKlein ohh ok...what i was doing is when i get over the silo i used to click on that unload trigger button while creating course. Guess that was the problem
@FarmerKlein
@FarmerKlein 5 жыл бұрын
i only used that button once when i was trying to force an unload at a placeable silo trigger in 17. CP is usually very good at detecting the trigger on its own.
@jonathanmaybury5698
@jonathanmaybury5698 5 жыл бұрын
If it did not collect hay whilst reversing you would not have the problem of mounting hay bales.
@kenreeder632
@kenreeder632 5 жыл бұрын
the tractors just sitting there doing nothing is a glitch in the new courseplay.....as soon as you jump in them they start working
@FarmerKlein
@FarmerKlein 5 жыл бұрын
Ya, i discovered that after i was done recording that the act of jumping in the tractor caused it to move again. Well were are getting there slowly but surly. Not sure about others but I update the thing twice a day or just before I record any video using it.
@BearsTrains
@BearsTrains 5 жыл бұрын
It's actually the helper stopping for a leak. They get a bit embarrassed when you jump in the tractor and bust them so they start again straight away
@huntingclarkson7096
@huntingclarkson7096 5 жыл бұрын
Would square bales help with him running over bales
@FarmerKlein
@FarmerKlein 5 жыл бұрын
Not really. sometimes they push the bales out of the way and sometimes they don't and instead climb over them. That is where you try to setup your course to keep the tractor from driving over where bales may be. or you are free to use a bale fork to collect the bales that may be in the way while the corseplay driver is running the baler.
@BearsTrains
@BearsTrains 5 жыл бұрын
@@FarmerKlein I just tried the square baler on F11 Ravenport after courseplay harvested it. Worked near perfectly using the harvester course. Even tried the Arcusin trailer with a 2m offset to the left and worked well except that bales do not always fall directly behind the baler so it missed some. Unloading is still yet to be solved but it was just a quick first attempt. Thank you for your videos, I have found them very informative
@FarmerKlein
@FarmerKlein 5 жыл бұрын
@@BearsTrains Great news. Ya it would be nice if the bales dropped more exactly as they seem to do fairly well in real life. but i think FS bales dont weight enough. but its nice ot use the same course to do multiple steps one after eachother.
@elliotmaldonado3864
@elliotmaldonado3864 5 жыл бұрын
Why is my account being charged by the AI worker? I was very cautious to say no when they asked me if I wanted to pay the worker at setup. If I'm using a wide sprayer like a 36m that account is going insanely down fast. It will charge me almost a $1,000.00 in one pass. Also the tank remains full and doesn't show used material. Is this a bug? I deleted CP from the mod folder and all CP files in the main FS 19 folder and reinstalled it again and it's still charging me to pay the worker. Have anyone experienced this?
@FarmerKlein
@FarmerKlein 5 жыл бұрын
in your game settings it must have the hire helper set to buy fertilizer. courseplay is just like hiring a helper in that regard.
@inertia182
@inertia182 5 жыл бұрын
He is correct. If your hired helper is set to buy items they will not use what you have before they start buying. It is probably so if you need to do touch up there is still some there for you to use.
@cameronnalley3197
@cameronnalley3197 5 жыл бұрын
Mine looks the same but it has different words
@kylemcc260
@kylemcc260 5 жыл бұрын
How do I get up the advance course settings?
@FarmerKlein
@FarmerKlein 5 жыл бұрын
For what ever reason they moved that function to a different tab. It's the first tab where you would record a course now. I have not looked at a recent update or used cp in about a month though.
@trevorb3521
@trevorb3521 5 жыл бұрын
how does courseplay react with traffic?
@eddiewinehosen6665
@eddiewinehosen6665 3 жыл бұрын
You need to slow down when entering a road or going through intersections and it should handle it fine. It senses if there's traffic and adjusts speed behind them but if you don't slow down in the situations I mentioned they can run out in front of traffic because it comes in to fast to have time to sense the crossing traffic.
@octane2099
@octane2099 5 жыл бұрын
Is it hard to use over all?
@FarmerKlein
@FarmerKlein 5 жыл бұрын
I wouldn't say its hard to use but it is alot to take in and not very well documented in game. So tutorials really help explain functionality.
@octane2099
@octane2099 5 жыл бұрын
Thanks I’ve been farming on jones dairy map and it’s a hassle the helper sucks I might have to try this out
@chaoz_2k185
@chaoz_2k185 4 жыл бұрын
I prefer GPS mod cuz it's more realistic :)
@FarmerKlein
@FarmerKlein 4 жыл бұрын
They really are totally different the guidance steering is for helping you with straight lines and making work lanes spaced out evenly. Courseplay is just like having smarter hired helpers since you dont have to be in the vehicle for that while you do need to be in the vehicle for guidance steering
@chaoz_2k185
@chaoz_2k185 4 жыл бұрын
@@FarmerKlein If they had an option to pay for the Courseplay that would be cool. (I feel cheaty when I don't pay the worker) Corsplay is realistic for Case autonomous tractor 😂
@Tyrope
@Tyrope 4 жыл бұрын
@@chaoz_2k185 There is a setting to have the Courseplay workers be paid through the CP settings.
@blackdeath5026
@blackdeath5026 5 жыл бұрын
It's still buggy but working ok i'll use it
@undertakerrules1990
@undertakerrules1990 5 жыл бұрын
Is courseplay actually out?
@minto4390
@minto4390 5 жыл бұрын
Yep
@undertakerrules1990
@undertakerrules1990 5 жыл бұрын
Is it cuz I can’t find it in mod hub. 🤨
@FarmerKlein
@FarmerKlein 5 жыл бұрын
Courseplay wont be on the giants mod hub for a very long time. It is available in pubic beta over at Github. I have a link in the first video in the playlist on how to install the beta. Do note it is very much an early beta. there are plenty of things not working correctly yet.
@undertakerrules1990
@undertakerrules1990 5 жыл бұрын
Oh ok, thank you so much.
@wizzard6486
@wizzard6486 5 жыл бұрын
Yep just like in 17 lol
@TheActualSsotyi
@TheActualSsotyi 5 жыл бұрын
Just to pinpoint to everyone. CP is unabble to do multiple fields, As the devs said, it was never intended to do so. You made me try it for 6+ hours before I gave up and checked the whole google for solve the issue. It is unsolvable. If it works you are just lucky, because it's only random. Thanks for make me waste my time by lying...
@GodprefersDiesels
@GodprefersDiesels 5 жыл бұрын
Are you talking about merged fields, or going from one field to the next?
How to creating unload, refill and loop courses with courseplay
35:27
How to Sell Grain with Courseplay
16:14
Farmer Klein
Рет қаралды 30 М.
Ouch.. 🤕⚽️
00:25
Celine Dept
Рет қаралды 29 МЛН
啊?就这么水灵灵的穿上了?
00:18
一航1
Рет қаралды 101 МЛН
UFC 308 : Уиттакер VS Чимаев
01:54
Setanta Sports UFC
Рет қаралды 831 М.
When mom gets home, but you're in rollerblades.
00:40
Daniel LaBelle
Рет қаралды 100 МЛН
Basic Field work and Course Generation with Courseplay in FS19
14:29
Ranking EVERY Crop in Farming Simulator  (Tier List)
31:01
MisterTaters
Рет қаралды 23 М.
Trying TikTok Computer Hacks...
16:13
Linus Tech Tips
Рет қаралды 9 МЛН
Ouch.. 🤕⚽️
00:25
Celine Dept
Рет қаралды 29 МЛН