How to vent Injora bead lock wheels.

[@snörre23]

On a similar wheel (the black brass 47 g) i just left out every second screw on that beadlock ring, looks better (for my taste) and air gets out. Usually i drill two holes on opposite sides of the rim and of course also through the ring.

[@havikhobbies]

That's good to know! I have another style of Injora wheel that has air paths between the two wheel halfs so only the ring needed drilling!

[@StanGrigsby-tz9dy]

Thanks! Best vent video out there!

[@havikhobbies]

Thanks mate! I personally don't like venting the tires, so figured I'd throw some ideas out there!

[@keithbutler6361]

Is this a better idea then venting the tires themselves.

[@havikhobbies]

I prefer this method because I've found my foams pick up less dirt and moisture than with vented tires. You can run on damp surfaces without water getting into the foams. Just personal preference really!

[@keithbutler6361]

@@havikhobbies I see what your saying now , good idea mate .

[@GeezerGramps]

When I ent my wheels I normally drill holes 180 degrees apart

[@havikhobbies]

That's probably not a bad idea!

[@JamesDirtRC]

Is it possible to Not vent and Not foam insert. Just Air pressure sealed ?

[@havikhobbies]

@@JamesDirtRC Yep you can do that and it does work ok from my limited testing, my biggest problem when trying that was that eventually some of the air would squish out and you have a flat tire, them you have to unscrew the rin to let the air back in!

[@Assassin_brawlclipz]

Just curious, where did u get the screw set. Ive been looking for a micro set for my screws

[@havikhobbies]

I think it's a hobby park screw for the SCX24 from Amazon if I recall correctly, it's been a minute!

[@pandacrawler6x6]

Great and Beautifull Wheels!!!! Naice Tuturial! Loved and Subscribed! Cheers!

[@havikhobbies]

Thank you! Injora makes some really high quality parts.

[@pandacrawler6x6]

@@havikhobbies Indeed 🐼👍🏻

[@richardjohnmallari8463]

Where do you buy your Center punch? Can you send the link please?! Thanks.

[@havikhobbies]

The center punch used in the video is a Matco branded unit but appears to be a rebranded Lisle centere punch. www.jbtools.com/lisle-30280-automatic-center-punch-5-1-2-long/?wi=off&gad_source=1&gclid=Cj0KCQjwn7mwBhCiARIsAGoxjaLg0Q2zN6vuISpLOfSwg0pskdI64iUrbt6yL40drqv3qpU3YeOib60aAiSZEALw_wcB

[@giopirmisashvili5514]

Thank you

[@havikhobbies]

Not a problem at all, thanks for watching!