How To Vertically Mount ANY GPU In 2023!

[@pauljmorton]

I was hoping especially to see the back of the GPU card so see how the display connectors are available through the case's slots.

[@izaragoza]

same here...

[@rayrobinson7551]

Me three ​@@izaragoza

[@devilmax777]

@@izaragoza me tooo

[@nicolass2262]

still a solid video almost 1 year later. thanks for doing this.

[@lautaro453]

Dude thank you, I’m new to building my own pc and I keep getting stuck with stuff like this, but this actually helped me visualise and understand how to properly do it. Great vid 👍

[@ReevyTCG]

Wow that looks so much better and is such a simple thing to do, might have to order one!

[@SpuddGaming]

I love vertically mounted GPUs and this is the easiest and best mount I’ve found so far. Plus as an extra bonus they make it in both black and white!

[@officialyashvirgaming]

@@SpuddGaming hi is it pcie gen4 though, cuz i dont waana lose speed, if i used this on my x16lane which is pcie4.0 i have 4080 rtx

[@mrflexii2067]

The question is how much FPS you lose and how much the GPU temperature increases.

[@DivineAthea]

@@mrflexii2067 It shouldnt increase at all, you can also get a bracket with rgb in it which TILTS your graphic card away from your glass panel

[@MrExdous69]

@@SpuddGamingsomeone else asked a question that I had the same. How difficult is the display port to access? It appears as though there is no room to connect to the gpu

[@Acconda]

how easy its it to plug in the display port though ? you missed that bit as there is cost bars in place for the bays, I suspect ups would have to pull the card further into the case the connector sits inside it.

[@MrExdous69]

Sure wish he had commented on this. I was thinking the same thing

[@dude55man]

I had to look at another vid about this, and what you have to do is basically pull the GPU back a bit and kinda twist the cable in. Then plug them in

[@MrExdous69]

@@dude55man bought this thing. Still won’t make my rx7900xt fit in my case. Now I’ve got to buy a new case. Ah well. Time for the 4000d airflow

[@silfrido1768]

@@MrExdous69i would go for the no tech king 95 but that’s just me. it fits my 4090 strix & you can do a push pull config while having the rad in the front. but that’s if your’re mounting the gpu horizontally. I would have to buy this bracket & see how much space there is in the front

[@WaldoWheresReal]

I think for some you cut out the old mounting plate, but some cases have it to where you can rotate the mounting plate or at least remove it to put in a vertical mount

[@NucciNick]

Great video man, definitely going to vertically mount my GPU keep up the great work man!

[@SpuddGaming]

Thanks very much!

[@RayChristo]

Wow did I thought you had about 100k subs but, I did not expect that. You deserve alot better

[@TheAngry-AmericanGuy]

THANK YOU, I JUST PURCHASED ONE !

[@GamerTechToronto]

Great video! 💪

[@SpuddGaming]

Thanks a lot!

[@RAGNA_94]

Thanks a lot ❤ it’s very helpful and very nice description from all aspect appreciate all the work you do .

[@DaftDaCool]

Great video! (as usual) 🎉🎉

[@SpuddGaming]

Thanks a lot buddy and congrats again on the win, enjoy your new clock!

[@damirferhatovic916]

Although a very useful video, the ending of the video is what made it worth watching to the end.

[@richardjung1438]

Thanks for this video. I am inspired and now subscribed.

[@ZENZOAJAH]

Amazing gpu man!

[@SpuddGaming]

Thank you!

[@ThatTravGuy]

Wouldn't the horizontal case slits prevent being able to plug any displays into the GPU? I suppose not since you managed it.

[@NoFalseDoctrine]

Well done video because of this I am definitely buying one.

[@orpheusqq8861]

great usefull video (like usual)

[@SpuddGaming]

Thank you!

[@Aratoxian]

Amazing work 🎉

[@sandermelse709]

Just don't forget that with this mounting unit the gpu comes forward a couple of centimeters to the front off the case

[@ideabagja]

do you know exactly how many cm?

[@ryanjones4106]

gotta love cooler master

[@vakatik]

Question: How do you attach video cables to the card like that?

[@mortalsyed]

you basically have to cut out the horizontal frame from the back where your ports are oe you wont be able to access the ports on your gpu. this stupid guy forgot to mention that.

[@GrampzIsGaming]

How does it work if you still have the horizontal bars from the case? Did you have to remove them to make it work or do the connector fit perfectly between them?

[@arksurvivalevolved9190]

Nice, is there any latency using the Pcie cable? Will it affect if you had 1 or 2 cards like network card and so? Appreciate comments...

[@JamieReynolds89]

does it come with screws to tighten up the bracket to the case because I lost mine that were on the case when removing the slots before

[@sanfran49rs]

White PC setup is Wicked niceeee!

[@Fran_Tluanga]

With all those fans facing all directions, there might be a mini tornado inside the case

[@biggjford2716]

very awesome. i just bought a 4070 and this mount.

[@hugodijkema5352]

Can I have any parts that you don’t use anymore and I know you get a ton of these and are probably sick of them but it would really make my day

[@porama15199]

thank you for good review.

[@fatboy6154]

Hey what cables r u using I like that black n purple

[@aakashvijaya]

what kinda screw tightening are u using??

[@prod_paxxiv]

Thanks!

[@SpuddGaming]

No problem!

[@AngelStratoFan]

i have an old inwin 101 case so the slots are so low... do you think this mount will fit?

[@Bewefau]

I want one one that allows me use my PCIe cards. And why does it look like your case has side mounts already on it ?

[@phoenixyt8631]

Dude this holder will work for rtx 4070 ti??

[@palmtree4293]

How about the Display / HDMI cable?

[@pvtpuddlez4054]

Did you need to add another pcie for the 4080 coming from a 3070ti?

[@Chewy-ey8rm]

I was wondering if you can use an air cooler (instead of an AIO) with this vertical mounting kit? Specifically an air cooler that is 150mm in height.

[@TinCity]

Question: with mounting the GPU like this, does this take away being able to install a Video Card because the slot would be covered?

[@g0d0fninjas90]

It does unfortunately, I'm currently trying to figure out a way around that with one idea being to vertically mount the video card in the already given slots and using a riser cable like used for the gpu 😂

[@serumo]

is tehre any way to also have a wifi card along with a vertical graphics card mount?

[@bcabello15]

So this fits with any case/motherboard?

[@Zeledonom]

i need to get one mount like that for my gpu, i don't like how all of the companies that makes the gpu's seem to have the backplate on top so the ugly side shows and the pretty side is hidden below, such a wierd choice for a aestetic gpu

[@jodo2785]

it's because the exhaust should point up in most cases

[@hunney3x]

bro thank u so much

[@Kixolisjous]

Just ordered this mount. Thanks for the video :D

[@SpuddGaming]

Glad it helped!

[@timothypatch5080]

How did you plug in the HDMI?

[@AFCBfan24]

Great video and congrats to the winner,sadly me and my family can’t afford for me to get a pc at this moment of time,keep up the good work!

[@SpuddGaming]

Thank you very much! There will be more chances to win stuff in the future!

[@fairplayer916]

thanks. this video convinced me to pick this usit over the one from lien le.

[@XellithUS]

Did you need different cables or?

[@duinkikker]

does this mount work on a NZXT H5 Flow?

[@taleeyab2607]

How would you give it internet since the mount blocks the pci slot.

[@BikerGoldie]

Sorry to bring up an old video but I have a Corsair 5000D airflow with a dark rock pro 4 cpu cooler. Would this work for me? Thanks.

[@8UUR6]

yh should work just check the dimensions (measurements) and it should work

[@gerrydc1317]

Yeh I’ll give you a like mate

[@aceavocado6358]

when i get an open case ill do this

[@arjohnvillaester3390]

Awesome build ❤. Bro I got some questions. I had this tforce 2x8 16GB ddr4 ram. Is it ok if I add 2x16gb 32GB ddr4 ram?

[@SpuddGaming]

There’s a few things to consider with this, it’s possible yes, but not recommended. If you are running a dual channel motherboard then you can run two sticks of each, provided they are the same speed and are in the correct slots (eg the 2x8GB in slots 1 & 3, 2x16GB in slots 2 & 4), but you may run into some performance issues. If the two sets are different clock speeds then this will cause a lot of problems and the system will not run properly. I would instead recommend just straight up replacing the 2x8GB with the 2x16GB rather than using them togethrr

[@arjohnvillaester3390]

@@SpuddGaming thanks bro. How about adding tforce 2x8 16gb. Will it be alright if the same brand and the same 3600mhz?

[@casehaha]

I have this Gpu (4080 pny xlr8 like you) and mainboard Asus too (Asus Prime B760) How to sync RGB on GPU with mainboard Asus bro , My Armoury Crate don’t show gpu in Aura Sync.

[@nage7438]

I bought the same mounting kit and I've got the same exact gpu but when I boot the pc the first time it says no Signal

[@salovoley]

I have had problems with the pny 4070ti xrl8 with the rgb the card Turn on the rgb Windows loads and everything spends 10 seconds inside Windows and the rgb goes to the card and if I open the pny speed x application I turn on the rgb and if I restart the pc or I turn off the same thing happens again within Windows it runs out of rgb I turn on the application and it has rgb

[@Matteo_14o]

cable extensions?

[@BlackEagleVideoHouse]

Can you really trust vertically mount specially the pcb that area we screw I saw many cards fry cuz it's bad pcb layout

[@luilogamer]

How can I vertical mount my STRIX RTX 4090 BTF edition?

[@katogonkato]

How can you plug the HDMI or DP cable?

[@MrKushinator420]

sideways. your case should have 2 vertical slots on the back for your gpu to sit in.

[@evex4829]

The only thing I noticed and need to criticize is that you didn't show the backside of the case and how you route the cables.

[@andik6828]

Vertical for sure! Just about to buy that bracket, thanks for vid.

[@keylanoslokj1806]

How can we vertically mount 2 GPUs? I like seeing my cards from the side horizontally. Not have them hidden.

[@kev2427]

Will doing this make the rest of your PCI slots unusable?

[@benjaminzajko7237]

Next video: How to plug in USB Just kidding love ur videos👍

[@SpuddGaming]

How did you know? 🤔

[@benjaminzajko7237]

@@SpuddGaming :D

[@4realtopics]

Does it work with a gtx 950?

[@davelee73]

does it increase the temp when u vertically mount the gpu?

[@FrenzyDtv]

Will this work on sapphire nitro+ rx 7900xtx? Tia

[@archadree]

how do you change the rgb's on that gpu

[@jw_4x]

Congrats to the winner!

[@SpuddGaming]

💪🏻💪🏻

[@DaftDaCool]

💪🏻💪🏻

[@andrewshundi4658]

is it compatible with the nzxt h5 flow case?

[@Sean-lk6vu]

Pretty much any

[@PenkoAnonym]

what screwdriver is this

[@SkyLeeeeee]

Any noticeable difference in GPU temps? Most vertical temp test I've seen don't have any bottom case fans. I've only seen one other case do this and it was a 1 C increase

[@LordAngelus]

Depends on the case. I have a Lancool 3 and the difference between horizontal/vertical mount is pretty much insignificant, like 1-2 degrees Celsius .Also I do have 3 fans on the bottom.

[@mrflexii2067]

What about FPS?

[@GameWithTonyYT]

Is this kit compatible ONLY with cooler master cases ?!

[@prOozax]

are you watched the video ? if not why u are here ? he talks about compatibility too .

[@GameWithTonyYT]

​@@prOozax Yes I watched it. Can you point me where exactly he says that this kit is compatible with any Atx or Micro atx or any type of cases?!

[@randomroIIs]

@@GameWithTonyYT 1:43 did you watch the video ?

[@KellerFkinRyan]

video starts at 2:40

[@Baconoy]

Ok 👍

[@connorquilter82]

Nice! 2 questions though... Is it a pain to get the HDMI cable into the GPU? and Does it render all of my other PCI-E slots unusable?

[@outsidethepyramid]

well that is the obvious question isn't it. he didn't show the back of the PC for whatever reason

[@Sora-o]

How many fans do you need? Yes

[@cyna76]

vertical gpu mount in 2023 is different than 2022 ?

[@chbilal6612]

Can you make a tutorial for 2024?

[@calidude4211]

Nice.

[@nicholasgeorge6367]

Why not use what's already there right on the case

[@jodo2785]

this doesnt work on old cases or anything with big air coolers

[@Kizfn.]

Nice theacing

[@SpuddGaming]

😊

[@chiefgstar8966]

But you completely blocked your display port access??

[@silfrido1768]

Did you notice difference in temps when vertically mounting ?

[@TrevorSullivan]

The NVIDIA GeForce RTX 4080 Super is an awesome choice of GPU! Pretty slick looking build. 👍🏻

[@valerikromanov5300]

This V3 vertical support is not suitable for the Cooler Master HAF 700 case! Reason, the part that connects to the case has 2 holes in the center and 2 guide pins on the sides and the HAF 700, GPU card, audio, etc... are held in under pressure and the case also has guide pins.

[@allisknu11]

Only if you're using an AIO. T_T

[@lordknightseyren]

Is it possibel to place this vertical gpu on matx case?

[@shoresy6927]

it looks cool sure but kinda dumb airflow.

[@maxbreitenbach837]

Can i have your old gpu then😏

[@SpuddGaming]

I wondered how long it would be before the first comment like that came through

[@maxbreitenbach837]

@@SpuddGaming 🤣🤣🤣so you think i can have it?🤍💙

[@Galy4a]

Like for Aenami's wallpapers

[@fuzzyhamster9877]

my pc is pretty good but lags sometimes

[@ragiponsoy2289]

Is there any temp difference between horizontal and vertical mount?

[@JahonCross]

no

[@mrflexii2067]

@@JahonCrosswhat about FPS?

[@JahonCross]

@@mrflexii2067 there not going to be any difference temp or GPU performance

[@cylex966]

it may disrupt airflow in the case but not for the gpu temp@@JahonCross

[@mossimo32001]

sli or cROSS FIRE LOOKS is better i guess.

[@carlosdinero6692]

Air flow is bad vertical

[@jasonprendergast7493]

The temperature we’ll go up a lot, now there going to be a god but if delay to the motherboard now with this connection. Not worth it to me. Form over function within reason, and to me this not within reason situation.

[@MartinezCodes]

Quite rediculous how big graphics cards are getting…pretty soon you won’t be able to run mini-itx anymore with newer Gen GPUs

[@AceOvrZero]

you should get a replacement L shaped cable for the gpu so it looks cleaner