How to Vinyl Wrap Your Roof Black (COMPLETE GUIDE)

Vinyl wrapping vehicles’ roofs has been the most popular thing to wrap since vinyl was created. Personally, I LOVE the look of it when the A and C pillars flow into each other, and that is done when the roof and the side windows have the same shade (black).
Getting this job done at home, will cost you less than half of what it will cost to get it done at a shop, AND you’ll have all of the tools afterwards to do this again to your next car.
///// LINKS TO PRODUCTS /////
3M Gloss Black Vinyl Wrap ▶︎ goo.gl/eXhs2D
Avery Gloss Black Vinyl Wrap ▶︎ goo.gl/KUWxpU
Porter Cable Variable Heat Gun ▶︎ goo.gl/pKNmas
Vinyl Wrap Magnets ▶︎ goo.gl/yWThPo
Suede Squeegee (Ultra Soft) ▶︎ goo.gl/T4FaW1
Felt Squeegee (Soft) ▶︎ goo.gl/WS9xaQ
Olfa Stainless Utility Knife ▶︎ goo.gl/rkxxpb
Olfa Art Blades ▶︎ goo.gl/MC84WY
Knifeless Tape ▶︎ goo.gl/eXRxAL
Premium Microfiber Towels ▶︎ goo.gl/YghJ39
Isopropyl Alcohol ▶︎ goo.gl/eckt5E
Meguiar’s Spray Wax ▶︎ goo.gl/My57XA
OTC Plastic Trim Piece Tool Kit ▶︎ goo.gl/fE7jEE
Camera Used for this Video ▶︎ goo.gl/Tnxgj1
If you have any additional questions, feel free to send me an email at [e-mail]. Thanks for watching!! :)
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯
You can send me stuff here 👇
MILAN MASTRACCI
PO BOX 30075 TOWN SQ. PO
FONTHILL, ONTARIO, CANADA
L0S 1E3
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯
Please give it a like 👍 and follow 👣
KZbin Channel ▶︎ / milanmastracci
Instagram ▶︎ / milmast
Facebook Page ▶︎ / milanmastracci
⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯

[@matthewchavez9134]

Look like a panoramic roof🔥🔥

[@milanmastracci]

YESSSS 😍

[@bchnts]

Wow it looks amazing... Can't wait for the headlights 🔥🔥🔥

[@dlofton123]

I've been trying to wrap my roof too but ripping out my entire interior to take off my antenna wasn't worth it, but after seeing how you tackled it, I'm going to try to do it. Thanks bro

[@zanedavid5362]

Just a tip for future reference and something you should live been when wrapping, always start with the hardest part. You should have created a template around the antenna using masking tape and used it to cut a perfectly shaped hole out the vinyl. Lay the vinyl down around the antenna first, then work your way out like you've explained at the beginning of the video.

[@troymeade3306]

Hey my Z friend. Great video. You are a great speaker and you are very clear and concise. In my opinion , there is one major part of this otherwise perfect video that prevents you for getting an A+. The major thing that has prevented me to wrap the roof of my Z, is how to work around the antenna. And you fast forwarded through cutting and squeegeeing around the antenna. I’ve watched it numerous times, and I’m pretty confident that I can do it, but I would love to see it in real time. However, your video prevented me from making a couple large mistakes, which would have been removing the headliner to remove the antenna before wrapping, the second great help is Not wetting the roof prior to laying the wrap down. when using perforated quality wrap. Oh and the “quadrant “ system. The most time saving 16:10 minutes I’ve spent. So glad that I watched this before tackling this project myself. I’ll send you before and after pictures if you like. Rock on. GOD loves you

[@draconiskim4256]

Milan Thank you for making amazing content! Keep up the work! Big Fan of what you do.

[@milanmastracci]

Thanks Draconis 👊👊 I'm happy to have awesome followers like you enjoy this with me!!

[@coles_infiniti]

Damn bro the roof looks good. I always be finding my self back to your videos with the dabdging video and now wrapping the roof video. Thanks for helping me out a bunch. Super helpful

[@Barracuda1807]

Great job, wrap looks great. Awesome video as always.

[@thetraindriver01]

A really good job Milan 👍👍👍 well done

[@21stcenturyGguy]

By far the best DIY video I’ve seen and it looks awesome!

[@milanmastracci]

Glad you liked it! Thanks Chris

[@dallastruckscene9755]

Badass 370Z👌 you have really good taste

[@milanmastracci]

Thanks Jorge!! 👊

[@marlonfuentes8265]

Bro that 370 is so badass great job Milan

[@milanmastracci]

Thank you Marlon!! 👊

[@sandytorres1229]

I would start off with the full cat-back since you already started with the exhaust anyway but so far I fucking love it 😍

[@marlostewart1107]

Can't wait to do mine. Looks awesome AF. Exhaust would be nice to see and hear.

[@coolissimo69]

Coil overs 1st, your wrap looks killer, thanks mate for the video

[@Pendaws]

Good job mate, you and your brother work well together.

[@NapFloridian]

You got magic, that wrap looks Amazing

[@milanmastracci]

Thanks man!! :)

[@larryiguidez4072]

Awesome car. Nice video for doing wrap. Will try it soon. Thanks.

[@some_car_guy]

I love how easy Avery is to work with but their gloss black seems to have a brown finish I have Avery on my roof and hood on a silver car but I had a black (jet black) car and I wrapped an unpainted bumper with an amazon vivid wrap and the color matching was perfect

[@Wyldebulldog58]

Hey Milan quick question. I’m about to wrap my roof gloss black I have the vinyl just gotta get to it. How do you maintain your vinyl anything special instructions for washing and keeping it lasting longer

[@milanmastracci]

I will probably ceramic coat it just like how I protect my paint. Weekly washes will help, but above all else, proper washing techniques are a must, especially when working with dark colours like black

[@Wyldebulldog58]

milanmastracci any particular soaps to stay away from or anything that would make it peel up?

[@k4tonic]

Pop those headlights open and paint the inside black, will look pretty epic and will enhance the tint if you decide to tint them later.

[@ndk2k4]

Your porter cable link goes to a steering wheel puller :D

[@milanmastracci]

Fixed :)

[@BlueJayBonsai]

Looks great.. how about doing the mirrors as well? If you think it’s too tricky for you do a collab video with CKWraps.

[@sheerazkazi489]

Good work, very helpful

[@milanmastracci]

Thanks brother!! 🙌

[@modified_eurosport]

Been waiting forever for this! FINALLY, great job!!

[@milanmastracci]

Thanks Holland!! 👊

[@milan1969]

Great content like usual. Keep it up!

[@Edumacation95]

Install the coilovers!!! Please do an in-depth tutorial especially on the demon bolt and for pieple without air tools and rusty 370z

[@Niko2515]

Wrap the door handles!!!

[@jubyscontent1340]

Wrap spoiler, mirrors n smoke lights 👌

[@tarek3702]

Shared and liked your video.. Still waiting for that dash cam

[@tp.]

Lots of great videos, thanks!! Can detail spray be used as the wav spray?

[@habanero5.054]

An amuse wing would look so sick on it and if you do the tutorial would be great since I want to do it to my brothers z

[@MumbleVlogs]

I’m such a big fan of black roofs, sometimes I wish my G37 came in white

[@JourneyGrace]

Great job !! What would you estimate to have the same done professionally?

[@jasoncampbell7765]

Amazing!!! Great DIY!

[@viperxbr]

Make sure you re-tune the computer if you add a full exhaust. Other than the change of tone, the power will be the same once the computer re-learns the new air flow and adjusts the air/fuel ratio.

[@Keepin-it-wheel101]

Looks so nice

[@abishakesutharsan9616]

great vid i like the detail and explanation!

[@ankurpatkulkar5021]

wow... that was informative :)

[@adrianedhouse5175]

Coil-overs next please - you've already tinkered with Z exhaust twice.

[@jad67jd]

As far as for the lights. You could try and Color match the Chrome Instead try to paint them the grey because you have projector lights.

[@TheAudiMan]

Do the exhaust mod next!! :)

[@husamalkaifi6500]

Head light housing pant next

[@martinskolnik9179]

add a front lip :)

[@milanmastracci]

👆 Truer words have never been spoken..

[@martinskolnik9179]

hey can i be famous now ? :D

[@XeVender]

Debadge the z logos on the sides, make door handles black and it will be fire :D

[@milanmastracci]

I would love to, but there is a hole in the side of the fender. A power line goes to the Z logo because it also acts as a turn signal

[@SuperCaricas]

This may sound stupid but do you wash your microfiber towels or do you use new ones each time?

[@milanmastracci]

I wash them, but when they begin to show age, I will throw them out as they become no better than a terry cloth

[@Teeanthony]

Patiently waiting for you to do this bro haha 🙌🏾🙌🏾🙌🏾

[@milanmastracci]

I did it 🤘

[@Teeanthony]

milanmastracci proud of you bro you deserve all the blessings 🙌🏾🙌🏾

[@JuanGuzman-hq6ig]

Nice job man🔥, question tho, where did you get the grill to your accord ?

[@milanmastracci]

Thanks Juan!! I picked it up online; amzn.to/2OF9rm6

[@JuanGuzman-hq6ig]

milanmastracci thanks man lookin for one for my 09 accord coupe; clean set up !

[@GTiR23]

Coil overs!

[@TheSaif78]

wrap the mirror caps

[@hambokshah]

nice work

[@milanmastracci]

Thanks man!! :)

[@stan4raptors]

Will you be tracking the Z

[@HabibRKO]

Coils!

[@ivanalimios3905]

My roof has little rust on it ca I still wrap it bro?

[@j4m875]

Bit of a late reply but if its visibly rusty and rough, I wouldn't recommend it as the wrap would trap in moisture and continue the rust process likely even faster. Best thing to do and something I'd do if were in the same situation is to just get it repaired and paint the roof black as that was sort of the plan in the first place. I've seen people sand away the rust, fill any pores/imperfections, prime it and lay a wrap right on top without paint. Its your car and your choice, if you want to lay the wrap on rust, by all means you may but honestly I'd recommend it.

[@JonaPark97]

Coilovers for sure

[@Summitve]

presente ya se lo hice hace tiempo al mio nice

[@riccardoarici]

Shouldn't you put some sort of liquid between the wrap and the roof? Such as window tint

[@milanmastracci]

You probably could but I don't see the need for it. The adhesive only really sticks until it is pressure activated

[@riccardoarici]

milanmastracci oke thank you very much Cheers

[@OneOffChannel]

Do the coilovers first, wanna see that stance 🔥

[@forarthur777]

Is 5x5 enough for like an 02-06 altima? Before anyone cringes I'm not 'pimping' my altima, the paint looks like crap(Florida sun) and I am trying to clean it up.

[@milanmastracci]

I would measure it before doing anything. If your hood is 4x5, I would get a 5x6 sheet just to play it safe so you have a bit of wiggle room on each side

[@rubert.]

Coilovers first!

[@anthonybrazeau3897]

Coilovers first, please!

[@Oldieeeee]

Do the exhaust!!

[@muhammadfurqan7815]

Bro go for the exhaust video in the next one.

[@kingrichee1817]

Nissan 370z looks clean informative step by step setup “ ayo you resemble and sound like that actor Shia LaBeouf lol 😆 no homo”🤨keep up the great work on your Nissan 370z I’m not gonna upgrade my 2016 Nissan 370z because I’m gonna trade in next year for the new generation Nissan Z aight aka 👑KingRichee ✌🏽👉🏽 that my white 2016 370z Nissan on my KZbin profile 👍

[@hasankhalid1204]

Both 😍

[@mirzafarrukhishtiaqbaig]

Great 😊

[@ralphralphin]

The car looks good man, but please tint the lights, then do the door handles. Then mess with the exhaust, it sounds fine now, but doing the front pipe and cutting the cat out would make that loud to a deaf man.

[@kimaniharris7922]

COIILLSSS!!!

[@Apoplectic_Spock]

Personally, I'd want to debadge the entire car as well.

[@kataksel8151]

Omg!!! It’s been too long 😢😄

[@milanmastracci]

I'M BACK :)

[@felipeduran6625]

Put the new exhaust first!

[@robertc5810]

U messed up as soon as u removed the paper backing, the real way is remove the paper backing by rolling under film while its on the panel to reduce dust getting on it

[@ja.935g67]

Do my 350z?

[@biggercrossz345]

Let's see the coils first

[@talalaburassa3755]

Coil overs

[@jcalvillo22]

Exhaust first

[@PuchaleAplay]

Coilovers!

[@Tony-sb8mv]

What colour to wrap roof on black car?

[@Capone3121]

Carbon fiber!

[@renownedfear187]

Why the hell do i wanna wrap my roof & not the whole car? lol

[@syedmesumraza1143]

Great job as always I want to see the coilovers and the exhaust in one video if possible great videos Milan keep it up great content also you can check my channel as well

[@Frikandellensaus]

Coilovers

[@rozcoog3511]

Coilovers foresure

[@milanmastracci]

I think that's the way its going..

[@jrbuilds8331]

Exhaust

[@Low23Key]

Coils yo

[@milanmastracci]

I think that's what I'm doing first :)

[@acexxace4122]

Milan your cool and you seem very smart on what your doing... just please for future videos do less talking.. thanks!!

[@ReyesDude06]

I was first like👍🏽

[@milanmastracci]

^^ #milansboys

[@dnixon1974dn]

talks to much like that Tavarish bloke .. makes ya ears bleed..

[@milanmastracci]

Rip my feelings and your ears..

[@redriver15262]

except tavarish has that idiot laugh and doesnt teach much

[@realgamer1789]

milanmastracci dude your cool your vids are nice

[@bartsimpson4983]

Who is Tavarish and wtf is a bloke? 😂😂 and why watch if you don’t like it?

[@DracoRemixer]

It’s Me Bro Seriously, you don't know what the word "bloke" means...?

[@the__black__box]

car looked amazing when u bought it stock, stop ricing it out

[@milanmastracci]

Ricing it out? Do you even know what rice is?

[@the__black__box]

u still got the accord?

[@dxb8788]

man you talk to much with less action

[@KenosVQ]

Wrap the car white

[@milanmastracci]

I'm not a huge fan of white cars.. I'm sticking with the Gun Metallic for now, but will probably change it up over the winter 😁

[@shamoydavis7272]

You talk too much

[@bitemeplss11]

Lets go.. wanna see how would it look .. keep it up budd

[@bartsimpson4983]

Coils !!!

[@VelvetAbyssPk]

Coilovers

[@nikolaylatev7222]

Coilovers