HOW TO WASH GAS STATIONS START TO FINISH! WE WASHED 3 GAS STATIONS AND 2 CANOPIES IN LESS THAN 1 DAY

[@littlespressurewashing]

MAKE SURE YOU WATCH ALL THREE GAS STATIONS WASHED ON THIS VIDEO! THERES ALOT OF GEMS 💎 THROUGHOUT THIS VIDEO TO HELP TEACH AND SPREAD KNOWLEDGE ON HOW TO CLEAN PROPERLY! PLEASE LIKE & SUBSCRIBE! THX 🙏

[@heresjohnnydfw9918]

Great Video! About to binge watch all I can on Gas stations. Got a really good lead that will take me to the next level if I land it. (When I land it!) Thanks for all the information you share!

[@littlespressurewashing]

I appreciate all the support definitely check out all the videos and if I can help you at all let me know

[@brianfletcher7942]

Nice job. Could you show how the pumps are being covered? Thanks.

[@littlespressurewashing]

Sure ,we use little tarps great 👍 thx for the feedback

[@litcastirl2480]

Your truly a leader in this space

[@littlespressurewashing]

I give it 110%

[@williamhiggins2263]

Well ANOTHER great video Barry, that was the AMAZON JUNGLE 2.0 in that bin store man and you kicked it right into touch,I thought I recognised the station before you said that. Well it's 01:50 here across the North Atlantic Ocean in Scotland so I'm going to call it a night my friend speak soon takecare.

[@littlespressurewashing]

Always great to hear from you buddy across the water 🌊 your an awesome supporter

[@cooperbrazee6952]

Ready for that class!

[@littlespressurewashing]

I’m getting things lined up 👀

[@d_antisocial00]

✨ watching in full now.

[@littlespressurewashing]

Always and I appreciate you

[@440pressurewashing]

Was wondering I'd I could xjet the canopy

[@littlespressurewashing]

Yes you can. I use the x jet before I had a SofWash system

[@dannycrain3485]

What you do about the gum. I from Indiana I dont inquire about gas stations. I have a 4 gpm and a 8 gpm washers. I dont have hot water. Would you have to buy a burner. Thanks for great content.

[@littlespressurewashing]

No,but heat really helps the gum come up,but the right chemicals will do wonders in my opinion. Some owners want that done others don’t it’s extra for lots of gum removal especially on a large commercial area

[@mondemeilleur7405]

Thank you very much for your sharing. Good job. moreover, do i need training for service station cleaning? If so where can I take this training?

[@littlespressurewashing]

Classes are in the works of being created now stay tuned

[@joshfuller3321]

Do you clean the pump screens and key pad ? I see some that are filthy and Im curious how you would handle that. Thanks!

[@littlespressurewashing]

I have at times and if asked but the employees have to wipe them down several times but you know how those employees are these days , they do good to keep people much less get em to go that extra mile but I clean them by hand with a rag and cleaning spray but never spray them ,use rag with proper and safe for display solution. Thx for the feedback and the support

[@vman6365]

nice job. how come you did not use the hot water at the gas station on the oil and grease stains?

[@littlespressurewashing]

I did use the hot water unit , had it on 175 degrees ,it was same station I cleaned earlier

[@littlespressurewashing]

Thx for the support

[@alis121]

@@littlespressurewashing but is it necessary to use hot water ?

[@PROCLEANLI]

I'm so glad I found your channel man.. im not sure if you will answer this ,but I figured id ask, when getting gas stations to hire you, who is it that you speak to? property owner of gas station or like the general manager ? I understand if you won't help me out with that, that might be a secret for you... any help Is appreciated... anyway, god bless you man and im thankful for your content..🙏🏼

[@littlespressurewashing]

We actually have a Members Only segment. You’re welcome to sign up for we go through all the most industry kept secrets and ways to make huge profits and the tips and shortcuts and ways to be successful and price and quote and land jobs. I don’t mind helping anybody out and you can find a lot of information for free, but for the juicy content, it will be in the Members Only and you’re welcome to join us. I’ll link it below ⬇️ www.patreon.com/user?

[@littlespressurewashing]

We always go to corporate and speak with the people in charge of making those decisions we never go to the gas stations directly 👍 God bless you as well my friend

[@realblythe]

Yesss another great video

[@littlespressurewashing]

Thx for the support

[@440pressurewashing]

How would I clean that starting out I have a friend that owns a few gas stations and he wants same thing done I'm just starting out

[@littlespressurewashing]

The concrete or the canopy or what?

[@440pressurewashing]

@@littlespressurewashing both

[@littlespressurewashing]

15 cent per sq ft

[@JeromeBuvet]

Hey, what credits do you get in the States from the brand/supplier?

[@littlespressurewashing]

I’m not quite sure of the question please elaborate

[@juanpablodacosta640]

Do you clean the canopy with sodium hydroxide as well? Or do you clean it with sodium hypochlorite? If you wash it with hypochlorite, do you wash the canopy first, rinse it, then rinse the floor, and then pour the hydroxide on the concrete? My fear is that the hypochlorite will mix with the hydroxide on the floor. You know what I mean?

[@mumzyed7818]

Notification gang 💖🙌🙌

[@littlespressurewashing]

Always coming in strong 💪

[@pwashvet]

What's the best way that you use to get leads?

[@littlespressurewashing]

Yard signs 🪧 and Google are my best leads

[@NolimitracingRC]

Where dose dirty watter go . Do you just push off to side

[@littlespressurewashing]

Reclamation process ,videos coming

[@erhelitruck]

Soft washing? How many psi is your pump?

[@littlespressurewashing]

300 max

[@jamiemorales2022]

Donyou use the sodium Mix for the Canopy... considering the hydroxide dripping down on you wont it hurt you?

[@littlespressurewashing]

Only for the concrete

[@Arun-mw3cj]

What kind of gun and pressure washer are you using Thanks

[@littlespressurewashing]

We use gas soft wash systems and Honda 8 gpm 3500 psi belt drive units “pressure washers”

[@chadbreeding8325]

Can u give me ideas how much for this shell I know it's different for area but I need ideas of cost thanku

[@littlespressurewashing]

We are around $.15 a square foot across-the-board

[@brianfletcher7942]

Where do you purchase your sodium hydroxide beads from ? Thanks.

[@littlespressurewashing]

Any chemical company has them , I get mine out of Nashville from a local dealer but I’m looking for a wholesaler now to start carrying it!!! I will keep you posted make sure to follow my Instagram and TickTock and Facebook so I will be able to announce when I have them for sale

[@littlespressurewashing]

Are you in Tennessee or nearby?

[@joshuastover5533]

When you do the concrete, do you just do whats underneath the canopy or how do they want it usually?

[@dberg820031]

Very informative. Is hot water really needed with the chemical that you use. Keep the great videos coming.

[@littlespressurewashing]

No not necessary but helpful for heavy stains at times Thx for the support

[@zoltankatona7910]

Hi ! I have a professional question! What chemical and technology do you use to clean car tire tread (brake marks) from concrete or synthetic resin concrete surfaces, such as the floor of an assembly workshop?

[@littlespressurewashing]

I’ve looked into some F9 products, and I think they have some that work good check out their product line

[@travisvanekelenburg]

Do you hit the whole parking lot or just the pumps, dirty spots and sidewalks?

[@ridethepace6005]

Subbed. What amount of beads per 5 gal pail? How did you apply it, downstream? Thanks.

[@littlespressurewashing]

I use roughly 🤔 a single 12 to 24 ounce cup full but others use a lot more but imo opinion it’s a waste after a certain amount. 1 24 ounce coffee cup full does the job for most all of my jobs per 5 gallon bucket

[@ridethepace6005]

@@littlespressurewashing Thanks for this. I'm thinking about trying this out.

[@littlespressurewashing]

Thanks for the support and I have some classes coming soon they’re going to be amazing and helpful

[@gusbiesecker8677]

So does the Xjet System better because it isnt putting the chemical through your pressure hose? Can I do the same ratio of Sodium Hydroxide and Dawn with a downstream injector with my pressure hose? Is there a way to put it in my proportioner? And why do you use sodium hydroxide over EBC?

[@littlespressurewashing]

It’s a matter of opinion and what works best for each person. You can run it through a soft wash system, blend manifold, proportioner, you can x jet it, or you could spot, treat it out of a 5 gallon bucket. I have never done a comparison video against gold assassin or EBC or any other product lines that are also great ,I like this product because it’s the most affordable and does a great job

[@TheTattoO89]

Can you show us how you prep the area to be cleaned. Like when you have to cover the pumps, or what kind of prep work you have to do when you do residential?

[@littlespressurewashing]

I’d love to ,I’ll make a special video outlining it for both commercial and residential and even the PPE I use while working

[@erhelitruck]

Where can we buy a sodium Hydroxide bag?

[@littlespressurewashing]

We buy it locally I get mine at Absolute Chemicals in Nashville

[@erhelitruck]

@@littlespressurewashing thanks

[@joshuastover5533]

Is that an 8 gpm washer with a 20" surface cleaner? I cant move that quick with the surface cleaner. Mines 8gpm with a 28"

[@jeffreyvaldez883]

Could you discuss the prices on everything I’m looking too buy about 10,000 worth of equipment for this business & wondering how much does each gas station pays because I already have jobs lined up for a gas station possibly more I’m trying too do 3 gas stations a day

[@littlespressurewashing]

Message me an itemized list of what you need, what kind of equipment you need we can supply all of that, and what type of questions you have for pricing

[@jeffreyvaldez883]

@@littlespressurewashing I’m just wondering how should I price gas stations & how much monthly income could you make. Because I’m trying too replace my job working offshore & what should I use or need. I was planning too buy *Simpson big brute 4000 psi 4.0 gpm gx390 hot water pressure washer *safety cones *surface cleaner *tarps *cleaning solutions Some other stuff

[@littlespressurewashing]

I am making a FULL IN DEPTH CLASS on gas stations that is exclusive and helps get you to the next level. It will be done soon online and in person. You can definitely change your life bro and level up! I charge usually around 10 cents per Sq ft and it varies and I try to get them on at least quarterly cleaning contracts. Stay tuned for class updates! Coming real soon

[@littlespressurewashing]

I’ll have all that info in my classes 😉 💪

[@YourUncle8501]

What spray nozzle are you using? Looks awesome

[@littlespressurewashing]

I use a m5 twist nozzle and a shooter tip on a j rod assembly,most of time I just use my ball valve to rinse

[@dylanmiller-cb3om]

How are you guys reclaiming the water?

[@alis121]

Hey do you need a water heater like is it necessary for it to work

[@littlespressurewashing]

I have two separate trailers w burners and love em not necessary but helpful

[@alis121]

@@littlespressurewashing thank you

[@lorenzopalacios4261]

do you spray the pumps also?

[@littlespressurewashing]

Yes we do 👍👍

[@SnoopFroggNFT]

Do you scrub a gas station converter where the oil stains are?

[@vitaliitys2782]

How do you apply the chemical??

[@littlespressurewashing]

Through a gas Soft Wash system

[@crossexteriorcleaningllc7512]

What kind of soft wash system are you running when laying that 3% mix bro?

[@littlespressurewashing]

Gas roof pump Comet p40 and ar45 I sell both only 1800 💪

[@chaynes8819]

hey about how much did you charge for this job..and can i do this with a 3100psi. 2.5 gpm pressure washer

[@littlespressurewashing]

No, you would need at least “minimum” a 4 gallon per minute 3000 psi or larger to run at least a 16 to 20 inch surface cleaner or you will be there all day and night. The bigger the GPM the better ,it’s more important than PSI in my opinion, and each your surface cleaner should be 4 inchs per gallon “example 4 GPM =16 inch surface cleaner, hope this helps , thx for the feedback and support,make sure to follow me on Tiktok Instagram Facebook KZbin and all other social media platforms, thx

[@geraldblacher6318]

how do you price your jobs ?? i’m in baton rouge and i feel like i just keep low balling myself i don’t know whether i need to just get a 4gpm or what but i give a set price.. is that bad

[@littlespressurewashing]

I would love to help you click over the Patreon. That’s where we go over prices and help people and jobs.

[@littlespressurewashing]

www.patreon.com/user?u=80159296

[@littlespressurewashing]

www.patreon.com/user?u=80159296

[@littlespressurewashing]

There’s ways and approaches to land and secure them. Don’t low ball yourself bro your better than that

[@Bigecb1234]

Are you downstreaming your sodium hydroxide?

[@littlespressurewashing]

I’m using an X JET

[@josephfroehlich7234]

Do you use a water reclaim system or not if so what

[@littlespressurewashing]

We use a water reclaim system, Hydrotek, EV 55

[@WashItNOLA-s8i]

Ever considered work lights, brother?

[@AndoBMS]

This is all with 3% SH and surfactant? This is all you use? I have a gas station to wash

[@littlespressurewashing]

Yes on canopies

[@littlespressurewashing]

And buildings

[@jamesgrove2244]

What chemical do you use to clean the canopy?

[@littlespressurewashing]

Sodium Hypochlorite 12.5 and Surfactant 👌

[@Plantsinafarmhouse]

Very good job 👏

[@littlespressurewashing]

Thx very much for your support

[@austinstanley3652]

What do you do with the dirty water?

[@littlespressurewashing]

We have a water reclamation system

[@johnargumaniz9179]

What do you do with all the runoff water?

[@littlespressurewashing]

Great Question, we pump it up filter and dispense it away from storm drains and waterways

[@EdwinCooper0123]

How much do price a gas like this one?

[@littlespressurewashing]

Depends If it’s a contract or one time cleaning, but around five cents a square foot

[@chrisfrauenberger7054]

Waiting on water

[@littlespressurewashing]

Always 🤦‍♂️