How To Wear The Low-Pro Belly Band Holster by Alien Gear Holsters

[@bigbossdeleon]

"Body's natural curves." Thanks for a boost of confidence.

[@achristiantargetedindividu1946]

Lmbo....it is easier with a gut

[@grassshadow1]

Lol , they like "hey fat joe the janitor ! Come in here , we need you for a sec "

[@zule4634]

Finally an appendix carry that doesn’t aim at your junk. Brilliant

[@The.Padgetts]

Lol for real

[@taylorkernea1121]

If you trust you and your gun you shouldn’t worry about appendix carry

[@phatgringo2.0]

Unless you're very well endowed like some of us.

[@FuckTheState]

Never had a gun point to my junk. Always carried standard sized pistols (we didn’t have small size pistols here where I live) in a way they get past my junk and point straight down.

[@dayzreloadedpve]

This!!! Totally agree

[@lordw9609]

Holy hell. The FIRST time I've seen anyone come up with an appendix carry for us folks with a gut. Bravo 😁👍

[@westside4lifebk]

Or don’t wanna put the gun near your junk

[@backyrdbully3276]

@@westside4lifebk Yea because we definitely need our junk.lol

[@westside4lifebk]

@@backyrdbully3276 I mean I do. I have a wife who needs piping down.

[@levodesigns2507]

PHLster, Raven Concealment, Henry Holsters, Keepers Concealment have been doing it for a decade

[@lordw9609]

@@levodesigns2507 for going UNDER your gut? I'll have to check back. The ones I've seen from them are standard appendix that my gut pushes out and they flop over when I sit up/down, get in/out of car... And painful

[@remarkzero]

What's it look like when they sit down, lean over, take a knee? Does it print and or hinder your range of motion? I would really like it if they could demonstrate more than just standing staticlly. The video and quality is great but just leaves me wondering about dynamic movements.

[@JefCollier]

Great points here. Chiming in to boost this request!

[@Aliengearholsters]

Noted and we'll keep that in mind for future videos! Thanks!

[@grassshadow1]

Yes especially with this holster since I can see people using this at the gym

[@studivan]

Yes it prints like hell, unless your standing straight up somebody will know you have a firearm on you, don’t walk into a bank with this on.

[@CrimtideStreams]

@@studivan What state prohibits carry in banks?

[@pethello3845]

1:11 and 1:25 Excellent holster design! I need this holster.

[@khalilismail133]

Love this band best holster I got for my MP Shield 3.1”. I’m on the heavier set and wear a lot of active wear for work

[@jamestyra5377]

I love the design of the Low Pro, especially for running/basketball shorts. I bought one for the p365 back in the summer and just got a second for my Shield plus. I am contemplating a third for my lcp2...who am I kidding, I will get one. The nice thing is that it hangs great for a fast draw and a comfortable, lightweight carry. It can also be worn higher on the body and to the off hand side as a sort of shoulder holster. There is a sort of unintentional "pocket" at the end of the velcro where I keep a Leatherman Skeletool. Great work on the design.

[@Thatdudedoes]

@ James Tyra great comment. How much does your weapon move when running? I don't run a ton but I carry when I do, and hate my gun flopping around in my zippered shorts pocket.

[@jamestyra5377]

@@Thatdudedoes I have had great resullts with it. The way it's oriented is very balanced and seems to keep it from flopping at all.

[@carbonite1983]

Just the comment I was looking for! I need a holster for my p365 while running with my dog. This sounds great.

[@StreetBikeTakeoverYT]

I would like to see a button system in play as I wouldn't fully trust the velcro but I do like the design

[@AJ-cn1xy]

Love my Alien Gear. Just found a couple more to add to my collection.

[@benboatright6461]

finally finding something that looks comfortable with out having shirt tucked in i never wear under shirt or shirt tucked in so havent really been conceal carry around my belt usually been inside my jacket but its starting to get warmer

[@cameronartukovich6810]

I bought a alien gear 3.5 holster and bought a Glock 43X MOS and you guys didn't offer a optics cut so I can have my red dot on..... So I modified it and it works flawlessly. You guys should make optics cut shells so you can cover more bases. You only need to cut like .5 inch off the top and it works. Just a idea.

[@glassmw9823]

Also light-bearing holsters that will work in this format and not just appending carry

[@TheNaroCroc]

I just got mine and love it, but would like to see more of the ways people find it works well.

[@phill6646]

Does the holster lock around the trigger guard?

[@sandan2358]

Are these stocked in any stores so we can try it on before purchase?

[@marcusxavier4436]

That low pro is a game changer.

[@studivan]

Until you actually buy one, it prints badly.

[@salty_terminal_civilian5374]

Could I use this under my armpit like a shoulder holster?

[@torbinnorsky4777]

Any plans to incorporate red dot use with this holster?

[@griminc6548]

yes and lights?

[@mattrR678]

I feel that incorporating a red dot should reduce the safety because they would have to remove some of the Kydex and at that angle it would increase the chance of the gun falling out.

[@TheNinja391]

@@mattrR678 All the retention is in the trigger guard or the light if there is one. There are a lot of higher quality holster companies that incorporate both red dot and lights in their holsters that for sure doesn't reduce retention or rigidity.

[@FuckTheState]

Americans: we like pistols with low profiles that are easy to carry. Also Americans: imma stick a giant red dot on top of my concealed carry pistol.

[@griminc6548]

@@FuckTheState I carry a full sized glock 17. I don't know if you ever seen a trijicon rmr irl because they are tiny.

[@ramonflores8220]

Thx for having a heavier person, sold me on product

[@juancarlosgoya5285]

Great very versatile over all able to carry when jogging.

[@ezratay1]

Nice. Purchasing mine now.

[@rap.abitan]

try the enigma phlster

[@ronsofo3607]

Hope you make the low pro for the Berrat a PX4 Compact Carry 9 mm

[@justaninja1]

Can you add multiple additional pouches for your EDC such as extra magazine and pepper spray and taser and knife?

[@atarikid7424]

mag pouch on the low pro?

[@ezratay1]

Can I use my existing hardshell I purchased for the Polymer80 and attach it to this?

[@combatvolta]

Looks very ,very functionall

[@nschumacher9577]

How does this work for exercise? Can you run in it comfortably?

[@jordanking5679]

Anyone have advice or experience if I were to wear this above my hip and more under the arm?

[@josephphillips3579]

Will it accommodate a Walther PPK/S?

[@fortherealls4731]

can you custom to fit the p80 frame?

[@benjaminscott8198]

I'm curious if it will work with my DME back brace. I'll buy one and come back to let y'all know.

[@Aliengearholsters]

We appreciate that!

[@crownhic6827]

This would be good for a newbie. I’m waiting for my card and then going to a class for conceal carry. Although, I’ve been waiting seven months for my card.

[@AAA-Wolf]

Same man, waiting over 45 days now. What state are you in?

[@crownhic6827]

@@AAA-Wolf Illinois

[@lifeofmike556]

Hey man the average wait time in Illinois is 145 days. I took my class in February and just got my CCL last week. And btw, no disrespect friend, im not sure how you can say this holster is good for a newbie... There's a holster for everyone's comfort. After carrying my gun for the past week appendix and 6oclock are very uncomfortable. I'll be going with this for my XDS

[@crownhic6827]

@@lifeofmike556 none taken. I have a lot to learn.

[@snoopywl1338]

In my state you take the ccw course first then apply. I'm waiting on mine to im 7 weeks in on a 3 month wait

[@stickyrice2714]

Is this compatible for Shield Plus?

[@ryangeiger5202]

Still crossing my fingers for one that fits a kimber k6s 3 inch. 🤞🏻 specifically the 3 inch.

[@jumboincredible]

Before you order it you might want to email them that’s what I’m planning to do.

[@dayzreloadedpve]

Fits Springfield XDS 3.3 9mm

[@igrifaldo82]

So when does it hit the shelves of Walmart?

[@donaviaetheridge5609]

Don't y'all make those for the EAA witness 10mm p compact?

[@BloodEagle.]

This a million times over

[@texascrossbowdude636]

I'd be looking for something like this for bike riding and walking around doing metal detecting. I'm assuming they can be washed, can you machine e wash or is it recommended to hand wash and air dry?

[@ARTABLACKATL]

Good holster, where can I order a friend, I'm from Bali Indonesia👍👍👍

[@theoycoy1715]

Will the Mossberg MC2sc with a red dot work well with this holster???

[@thehandynomadthehandynomad843]

This looks like it’ll work for me. Is it on Amazon yet? Or a different site?

[@soyelchostri]

Is it avaliable for hand guns with laser/lights?

[@tomwolf5755]

This is my first choice, but I need it to fit my Sig p365 with Lima laser. Can't find one like this that does

[@chien-shengtsai8626]

Does the Low Pro hold a revolver, specifically a Ruger SP 101 357 2 1/4 inch barrel?

[@charleslee808]

How does it work if you’re wearing it with a tucked in shirt in a work environment?

[@DIYDad1]

Can you wear the belly band down lower so the holster sits tucked between your belt line? Looks a little different from the older style belly band holsters I’ve traditionally seen. But I’m concerned that the gun could come out of the holster if it doesn’t have tension against an article of clothing like my cloaktuck 2.0 sort of requires in order to make the retention between your waistband. Just gives it sort of a second level of retention by keeping everything nice and tight against your body so the grip doesn’t flip out and print.

[@yassergym3542]

IS GOOD FOR HK USP

[@DavidQuinones69]

I've used other belly bands for years and I've sworn by them. My biggest complaint about them is they provide almost no trigger guard when wearing. This solves the problem.

[@studivan]

No it doesn’t and I can tell by you comment you have never bought an alien wear holster, they all print.

[@jeffreyehlers1605]

@@studivan depends on the person. They don’t print on me.

[@angelPerez-hq1fw]

Dónde puedo conseguirlo ????

[@josephholster9626]

Alguna página de ventas al extranjero

[@jonhenson2465]

is there any reason it would not work in a cross draw for a backup gun

[@bryman31]

its like a cross draw but in the appendix position. SOLD!!!!

[@medic58]

I think this is exactly what I need. Iwb holsters are uncomfortable to me and owb holsters are to much to conceal. I am a big dude this fits the bill or should I say belly lol.

[@levodesigns2507]

*coughs* PHLster Enigma

[@1911bg]

I would advise trying before buying.

[@stephmarie8620]

I really want something like this but it seems like they won’t be compatible with optics

[@globaldigitalfreightsurvey7764]

Do you have distributors in South Africa?

[@curlybill3966]

Take a belt, use your current IWB holster, put it on before you dress, Shuzam! You can cover it up with any type of clothing.

[@MohamedEzzat-ki2tg]

Very nice 👌

[@cannonballsam5488]

Personally i love your holster drop leg line better. Said that you need to bring out a holster that can accomodate red dots, and light laser on the rail of guns. Modular like your drop leg holster line.

[@thunderbear0]

Can you have that for G19?

[@elflecha007]

Like the options available but no fit for a G19 with an Olight Baldr mini or a P365X (short barrel, long grip + Romeo) with a tlr-6 😔

[@michaeldewitt7254]

I don't know your abilities, but what I did was heat up a blank piece of kydex I got on Amazon and was able to make my own shell that fit my g19 with olight. I never worked with kydex prior to that and I have been running it for over a year with no problems. Getting the holes to line up with the alien gear was probably the most time consuming part.

[@jaimerodriguez5278]

Hola me gustaría saber donde la puedo comprar y si la tiene o sirve para la SiG Sauer P320

[@jaimerodriguez5278]

Hello, good night. I would like to know where I can buy it? is it suitable for the sig sauer P320? Thank you

[@jaimerodriguez5278]

hello what is your profile on instagram?

[@gregoryfranklin17]

No we’re to check out on line just video

[@josemamolligan3648]

We're can I get one

[@TheMrpunisher77]

Does the Low-pro have a facility for Olight torches attached to rail or for fire arm only?

[@trytobetheballpeople]

Does the customer have to put the holster together? I heard from another review that was the case. Is this true?

[@oakleywhalen343]

No mine was completely assembled when I received it.

[@trytobetheballpeople]

@@oakleywhalen343 Thank you for replying!

[@bluebomb6007]

Do they make them for left handed ppl

[@jmiddlefinger]

I’m going to be grabbing one of these ASAP. I love my shape shift kit, but this will really be a welcome addition to it.

[@bruiseu2]

Is it made of kydex? If not what is it made of?

[@chanda-aime6388]

I love this style and angle but I watched a review that says due to the design, you're pointing at everyone when you draw.

[@excellentzwane489]

Nice I would love to have it

[@kantill]

Can it be carried in deep concealment, below the pant line?

[@Aliengearholsters]

Only slightly, as the firearm's handle should stay accessible

[@brandondodd3133]

very cool I carry a db 9mn also im shoot left handed wonder if my pdw would fit and if they have a left handed setup

[@griminc6548]

They have left handed setup no options for dots or lights tho sadly.

[@ezratay1]

Do you guys have this design for the Polymer80?

[@grassshadow1]

Would this work for jogging?

[@dawkinss2422]

I want this. I might get this.

[@yourdream8]

Hello, how does this behave when driving/sitting/wearing a seatbelt when worn in the lower belt position? It seems like it would be uncomfortable to sit in this.

[@CrochetNewsNetwork]

It’s very uncomfortable sitting.

[@TeamFish15]

Can this holster fit the Glock 30S SF?

[@Beasty02]

Does anyone know keywords to search for a holster that draws from the side like this one?

[@cguerra]

@1:09 “your body’s natural curves” 😂 lmao

[@stephanie_beth]

Looks good. Really like that you mentioned shirts with prints help to conceal better, it never occurred to me. I'm thin, but my firearm is 1.46 wide making printing an issue. Only wear your cloak owb now, great holster. Need slimmer gun LOL

[@PANCHOVILLA4U67]

SOLD!!! 👊🏼😎

[@siddharthagaruvandula7292]

I want this

[@westside4lifebk]

How does it hold up with a Canik TP9 elite combat pistol?

[@Dingdongwitchisdead]

It’s sad that the Glock 30S didn’t make the ShapeShift series. This gun is so underrated and I don’t know why it didn’t become just as popular as say the G43 and G26.

[@kingcherokeechief2260]

Y’all make great holsters just really wish y’all Made Light Bearing Holsters!!!!!!!

[@steveporter3]

I tried to order one of these last night for my Glock 43X and it said it wouldn't ship for another 2 weeks. Alien that back logged or are they allowing for the slow delivery service?

[@cbjessee]

Mine took 6-7 weeks to arrive

[@procrastinator6902]

2 weeks? You're lucky. I ordered one for my M&P Shield Plus a month and a half ago and just got it yesterday. That said, it is very comfortable and I like what I've experienced so far.

[@feralpundit]

Just received my lowpro today! 🥳 Question.. in the package with the extra adjustment sizers and tool, there is a little rubber green alien head. Is it for pure decoration? Maybe wear on a chain?

[@Aliengearholsters]

The Alien Head is a little addition that is molded with our parts, and you can use it wherever you'd like!

[@deltaboy2011]

When will you be able to get it in G3C, cause right now the option is G3 which is nearly full size.

[@salty_terminal_civilian5374]

The G2 holsters fit the same way, as well as the millennium G2 and all... I carry the G3 version with my g2C when I go to the gym.

[@deltaboy2011]

@@salty_terminal_civilian5374 so the holster meant for G3 can hold the G3C with no problems? It’s just the extended barrel only that’s a problem? So just shorter barrel but still able to hold the weapon secure?

[@salty_terminal_civilian5374]

@@deltaboy2011 yes I barely have any excess. The retention is kept in by the trigger guard area, and they are identical dimensions on all G2/G3c/G3 models. I personally think it's a very good fit, I would encourage you to try it out. If not, you could return it. Just my personal experience. Good retention and fit for me personally.

[@salty_terminal_civilian5374]

@@deltaboy2011 I forgot to mention I have two models of this. The G3 full size one, but the g3c will fit the pt111/millennium G2 (fits g2C) option. Both fit great. Same dimensions and all.

[@deltaboy2011]

@@salty_terminal_civilian5374 awesome! Thanks! I’ll pick the G3 version and able to use full size g3 and G3c handguns I have for that holster instead of having to buy two.

[@arthurfleck8777]

Most people in America are overweight so its good that you cater to the majority, unlike most companies.

[@johnkovalchick6218]

I have three of your iwb holsters and I have a size 46waist what size band do I need to work with my iwb holsters

[@Aliengearholsters]

Thank you for asking! The belly band size does not always align with your waistband size, you will want to measure around the part of your body where you plan on wearing the band and order the size that best fits that measurement!

[@mangkanortv215]

How much?

[@RSLUXURY502]

Excelente 💯💯💯💯👌👌

[@byronalexander5785]

I would actually wear that

[@HiThere619]

1:09 😂 I have the opposite problem. I’m 6’2” 120lbs. Literally anything I try to hide on my body shows.

[@serefkazmac3663]

Fiyatı ne kadardır sipariş nasıl verelim Selamlar ☕🤚

[@fahadsiddiqui6653]

Good

[@hotrod4126]

@Alien Gear Holsters Is there a way to incorporate a mag pouch? I carry at 4-4:30 as well. But I’d like to try this one. I’ve been wanting a IWB type holster but canted like this one is.

[@manpower5747]

yup, i do this also

[@ZFlyingVLover]

What about the spare mag holster? is that a separate accessory?

[@Aliengearholsters]

Yes, the spare mag holsters are separate accessories! We have options to add one onto the Sport Tuck Belly Band, or be carried with a hard shell mag holster with our Cloak Mag Holster, or with soft form mag holsters, the Grip Tuck Mag Holster

[@sbdreamin]

i thought you said it has a cant to it..how are you wearing it straight up and down at 4:30?

[@Aliengearholsters]

That is our other Belly Band Holster, the Sport Tuck! 0:19

[@JoeyBaby47]

You guys need to release a shape shift chest holster.

[@shaistazuberi7835]

Great

[@aditmerdeka6611]

Thats holster For all gun?? Can my HS9 use that?

[@Aliengearholsters]

Greetings Adit! No, there is a limited library of firearms available to use in the Low-Pro Belly Band holster but we are always looking to expand! We have added your firearm to our Gun Wishlist so that we may offer something for it in the future!