How to Weather Titan Armor Panels | Adeptus Titanicus Weathering Tutorial

  Рет қаралды 8,655

The Race For Terra

The Race For Terra

Күн бұрын

Пікірлер: 35
@dougjones3305
@dougjones3305 3 ай бұрын
That texture paste looks rad.
@TheRaceForTerra
@TheRaceForTerra 3 ай бұрын
Thanks, Doug, hope you enjoyed the video!
@stephenwells7379
@stephenwells7379 3 жыл бұрын
I think that texture paint just solved my FDM printed titan issue. Thanks and subscribed
@TheRaceForTerra
@TheRaceForTerra 3 жыл бұрын
Hey Stephen, thanks. I'm not sure if I mentioned it in the video, but that is one of the best uses for the product IMO. With one of my Grim Tanks, it worked a treat to give it visual interest whilst making the layer lines invisible.
@stephenwells7379
@stephenwells7379 3 жыл бұрын
@@TheRaceForTerra You did mention it in the vid and I immediately looked at my half built and meticulously sanded Reaver and went Ahhhhhhhhh! Paint on order, Thanks again.
@stephenwells7379
@stephenwells7379 3 жыл бұрын
As an update, thanks for this technique. My 28mm FDM Reaver looks effin boss!
@cymrodave
@cymrodave 3 жыл бұрын
Great work. The texture paste looks really nice with the weathering. I’ll have to pick some of that up😁👍🏻
@TheRaceForTerra
@TheRaceForTerra 3 жыл бұрын
Thank you! The anti-slip paste is well worth it. Let us know how you like it!
@Krullio
@Krullio 3 жыл бұрын
Hail Amy pushing this video idea :D The texture on the panel looks really fitting and gives adds to the finish; you've convinced me once more of another product I must buy. On a final note, if you like the oilbrushers, there is a AMMO Mecha light green oilbrusher that works as a nice verdigris finish (mayhaps add some blue to it, depending on personal taste). I tend to apply the oil from the oilbrusher with a tooth pick in parallel to using the brush, for smaller and heavier effects respectively.
@TheRaceForTerra
@TheRaceForTerra 3 жыл бұрын
Great to hear you enjoyed the video. Now you've made me buy stuff in turn! (Light Green Oilbrusher)
@michaelgeorgeduddy6153
@michaelgeorgeduddy6153 3 жыл бұрын
Great work as usual!
@TheRaceForTerra
@TheRaceForTerra 3 жыл бұрын
Thank you, Michael! ¡Un saludo!
@lazysponge
@lazysponge 3 жыл бұрын
Finally so awesome!
@TheRaceForTerra
@TheRaceForTerra 3 жыл бұрын
Thank you, Dantioch! Hoping you submit stuff to the next Spotlight in September!
@lazysponge
@lazysponge 3 жыл бұрын
@@TheRaceForTerra if i can take a good Photo maybe :D
@PinkyJustice
@PinkyJustice 3 жыл бұрын
Nice video, awesome new tech and products for me to experiment with! Thanks!
@TheRaceForTerra
@TheRaceForTerra 3 жыл бұрын
Thanks a lot, Pinky, glad to hear that!
@hedleycarter3020
@hedleycarter3020 3 жыл бұрын
another cracking guild pal
@TheRaceForTerra
@TheRaceForTerra 3 жыл бұрын
Thank you, buddy! I assume you meant "guide", but actually...the WEATHERING GUILD would be a pretty cool name...hmm...
@jarosawknas8947
@jarosawknas8947 6 ай бұрын
Very interesting video! Battletech models are very similar scale to Adeptus Titanicus roughly 1/285 & 1/300.
@TheRaceForTerra
@TheRaceForTerra 6 ай бұрын
Hadn’t thought of it that way, but yes. You’re right! Thank you!
@rick_the_framer
@rick_the_framer 3 жыл бұрын
Love the texture paste and the sponges seem well worth trying - you cost me a fortune!! Happy holidays.
@TheRaceForTerra
@TheRaceForTerra 3 жыл бұрын
Hahah! Money well spent! 😀 And thank you, sir!
@furikuri6585
@furikuri6585 2 жыл бұрын
Hey TRFT, i stumbled over your Channel to get a Tutorial for painting legio krytos Titans and stayed for your weathering tutorials since i want to get to the next level of painting with adeptus titanicus. My question is: how does this technic of anti-slip/liquid mask chipping could work on two-tone armorpannels like for the krytos Green/white hazard stripes? I hope this clip isn't to old to get an answer here, Cheers!
@TheRaceForTerra
@TheRaceForTerra 2 жыл бұрын
Hi Furi, I always answer questions! I don’t think having two colors on one panel changes anything - I would use the same undercoat for both. For an extra spin, do check my AMMO U-Rust tutorial with the AT-ST (last published public video right now).
@TubularMonk
@TubularMonk 3 жыл бұрын
I may have missed it but at what point did you remove the mask that was protecting the panel while you did the trim? Just prior to the pin wash? Great video by the way, really useful.
@TheRaceForTerra
@TheRaceForTerra 3 жыл бұрын
Hi Gary, thanks a lot. Right before the pin wash, yes. Glad you liked the video!
@epistarter1136
@epistarter1136 Жыл бұрын
Do you still use tamiya mark fit or do you just mostly use the strong version?
@TheRaceForTerra
@TheRaceForTerra Жыл бұрын
Hi Epi, I never used Mark Fit - always either Strong or SUPER STRONG! 😉
@ExOfficeZombie
@ExOfficeZombie 2 ай бұрын
did someone painted a whole Astrates armor with the Anti-slip paste? the end result isn't too overpowering? i got the feeling it might ends up looking like buildoff or if you had wrongly/not deluted enought regular paint, kinda look?...i mean i think in big pieces like a tank this might look amazing, but im not totally sure how it looks on a whole regular Spacial Marine Power Armor.
@TheRaceForTerra
@TheRaceForTerra 2 ай бұрын
Astartes armor I have never done - tanks I have done many, and they look amazing with the texture paste! For example, check out the texture here: kzbin.info/www/bejne/a3zalqCbZ5KXjMU
@ExOfficeZombie
@ExOfficeZombie 2 ай бұрын
Wow! Thanks for your reponse,…it definitely looks amazing on the tank, aswell as in this small panel all alone, i guess i will have to jump and try what happens if i coat a whole Space Marine with this paint, by the way I just discovered your channel yesterday and im already amazed by the quality of your videos and work. You are truly inspiring and helpful, thank you! 🤗
@VallesDelOso
@VallesDelOso 2 ай бұрын
@@ExOfficeZombieThank you kindly, my undead friend! I always try to answer questions, so if anything else comes up, you know what to do! 😊
HOW TO PAINT A WARMASTER TITAN: A Step-By-Step Guide
19:55
Brushstroke Painting Guides
Рет қаралды 30 М.
...or how to paint an ASH WASTES BASE!
15:41
Duncan Rhodes Painting Academy
Рет қаралды 114 М.
[BEFORE vs AFTER] Incredibox Sprunki - Freaky Song
00:15
Horror Skunx 2
Рет қаралды 20 МЛН
Чистка воды совком от денег
00:32
FD Vasya
Рет қаралды 6 МЛН
Каха и дочка
00:28
К-Media
Рет қаралды 2,8 МЛН
How to SMOOTH & DETAIL armour easily! No Airbrush needed
13:49
Artis Opus
Рет қаралды 26 М.
How to Paint and Weather SCENIC BASES | Scenic Bases Tutorial
17:05
The Race For Terra
Рет қаралды 4,9 М.
Legio Krytos for Adeptus Titanicus: Army overview and tutorial!!
18:42
WAARLOORD TIITAN!
14:30
Squidmar Miniatures
Рет қаралды 381 М.
Introduction to Adeptus Titanicus
10:55
Optimal Game State
Рет қаралды 3,2 М.
EASY Method to Make Realistic Shell Impacts on Armor Models
8:40
Night Shift
Рет қаралды 1 МЛН
How to Tackle BIG Projects - Hobby Cheating 288
19:47
Vince Venturella
Рет қаралды 23 М.
Leman Russ Battle Tank || Solar Auxilia || Grimdark
21:03
TheFeralPainter
Рет қаралды 9 М.
EVERY 40K FACTION'S Best and Worst Models!
21:23
Paul is bad at stuff
Рет қаралды 147 М.
[BEFORE vs AFTER] Incredibox Sprunki - Freaky Song
00:15
Horror Skunx 2
Рет қаралды 20 МЛН