How To Weld: Weaving On Pipe With A 7018 Rod

[@bobprice9244]

I just set my Miller 250 to 85-90 and do a quick weave with no hesitation. It gives me a slight undercut on the edge that fills as I go . Everyone is different, but I pass the x-ray

[@austinhargett5792]

X-ray just shows clean 👌🏽👍🏽

[@downhilldaddy5282]

That’s all that matters

[@bobprice9244]

@@downhilldaddy5282 at 62 I can't believe these younger kids around the shop don't know how to do anything but squeeze a trigger.

[@downhilldaddy5282]

@@bobprice9244 it’s sad

[@stevez7530]

@@bobprice9244 teach the youngsters

[@commietube4273]

Mind blown 🤯 Thx! I was always taught to break down my beveled edges with my fill pass but I would always lose my lines doing that. Thx so much!

[@austinhargett5792]

Don’t touch them until you’re ready for the cap!

[@philthyphil3324]

You were taught wrong, I leave a thin line on each side of the bevel, makes the cap easy

[@imtriggered.4559]

This right here is a very helpful video. Also earliest I've ever been to a video!

[@austinhargett5792]

Sweet! I’m glad you liked it!

[@bobroberson9286]

After 50-yrs of making a living in the welding business there's ONE THING that will make you a success, PRACTICE ⚡

[@commietube4273]

Saved this vid to my welding file. Thx!

[@austinhargett5792]

Proud to be there!

[@joegreenlee5188]

I remember welding pipe with an old tumb stone Lincoln lol these new welders are insane

[@WelderB1Family]

Well done! 🔥👨🏾‍🏭

[@austinhargett5792]

Thank you!

[@slimpickens8211]

staying in the bevel till the cap is important but I have always justified it with the recognition that when you break down that hard edge early in the procedure it makes it more difficult to see during follow up passes.

[@darrellroeters4951]

Good explanation

[@austinhargett5792]

Appreciate you!

[@josezendejas136]

Great tips and info🤘🤘

[@aidenwilson9874]

Great video thank you, out of interest what is the chuck/vise/roller are you using ?

[@nairoluiz3937]

Everlast é muito bom. Quero ter um 275 mas não sei se vendem para o Brasil.

[@austinhargett5792]

I’m sure it’s world wide!

[@nairoluiz3937]

Obrigado por responder! E você consegue me ajudar comprar um 275?

[@AustinHargett]

@@nairoluiz3937 let me ask my friends at everlast!

[@davidtwumasi2684]

Keep up e good job bro

[@jeffcalderon2107]

Nice work

[@wedwobster6510]

Is that an argon quick connect? Did that machine come with that quick connect?

[@isaiahlynch4113]

Could u do fixed 6g?

[@darrellolsen1204]

Cool video 👌

[@DoleshwarPandey70077]

Very good ❤❤

[@yassineghazlani6170]

Nice video

[@JohnCarmona]

Thank you!!

[@tomspeed2000]

I have 50€ device from AliExpress but i never was able to stick to Metal piece together because the glue works better than that welding what i made…by the way I don’t know why each time the electrode sticks to the metal ..

[@davidbranham3042]

Great video! Any chance you could do a 1G open root butt weld video 1/8 6010 root 1/8 7018 fill on 3/8 plate. I have been really struggling with the root. Do you have any good ways to practice this?

[@LilFish0]

Make sure your putting landings on your open root plates so there’s something the metal can land on with the root pass. I prefer 3/32 landing. If it’s a job your practicing for, the gap and landing might be fixed to something else on the WPS.

[@BuddaSlim]

Bro I’m testing tomorrow

[@JonathanRector-k9h]

Looks good man. But Must be easy welding from 9-12 and turning it lol. try the fix position let’s see what it looks like and show it.

[@deidaramartinez847]

Please do a 7018 cap in position, I need help on dead man's curve

[@austinhargett5792]

All of these rules apply. It’s a lot to do with arc length. I have another tutorial in position inside the weld app.

[@ed3dcreations386]

Would you be interested in doing a review of my custome respirator. So every welder can afford one and the filters are cheap but still 99% filtration with carbon filter

[@spambab674]

Fact: That man who ask question is from Philippines. And 90% of Filipino Welders dreaming getting a job across the world and im one of it. I hope i can make it soon.

[@Haems10969]

Stronger or weave. 🤔

[@josegalvez4747]

Its a good video but dont forget that QC wont buy caps with stringers wider than 3 times the diameter Of the rod

[@andrerossi5010]

Good.

[@austinhargett5792]

Great!

[@prauwnsauce]

Turned anti stick off cause I am a very literal person and assumed it made me not able to stick weld. Thanks for the correction lol

[@matthewjeffers-ms7hl]

First

[@austinhargett5792]

1st

[@calikalbocalikalbo6082]

To all want to be welders. Forget about stick unless all you want to do is pipe. Pipe is a small majority of welding and mostly only used for pipe and deck welding (you don't want to be a decker either).

[@notanymore9471]

What? Don’t give advice bud you obviously aren’t qualified to. Smaw is used all over and pipe pays the best most of the time.

[@notanymore9471]

Oh I’ve been welding 25 years and have never heard of a “decker”

[@calikalbocalikalbo6082]

@@notanymore9471 ….Then you have obviously never been on a structural steel job and must be a piper. This is why I say unless you just plan on doing pipe forget about stick. Deckers put the decking down for the concrete to be poured for the floors.

[@notanymore9471]

@@calikalbocalikalbo6082 nope try again.

[@calikalbocalikalbo6082]

@@notanymore9471 …. Hey chick, guess what I forgot more about Welding then you’ll ever learn in your life. I was a welder fabricator for 24 years and I’ve been a CWI for 20 years. I live in Japan as a Welding consultant for major companies in the US, so yeah, I think I know a little more than you. Yes, I know pipe is done around the world and it’s also the oldest and easiest welding technique of all and it’s only used primarily on pipe small brain.

[@davidspin5353]

Too many adjustment on that green thing, ya just need amps and maybe arc force...

[@SuperAWaC]

get rid of the music thanks