How to Wheelie on 50cc Stock | Derbi Senda |

[@emlarun4337]

I had an derbi senda xtreme limited edition 2019. Almost the same kind of moped. Nice turtorial but i want to give you one tip that i learned while training stock wheelies for 1,5 years. Drive in walk pace, around 1-2km/h, move your body at the handlebars and kinda "jump" and meanwhile tap hard on the front brake so the dampers compresses, then at the same time as the front suspension forces back, 1. full throttle and dump the clutch and drag the handlebars as hard as you can and try to get your ass as far back as you can. If you get the bike up, 3. Make sure you can handle the rearbrake (IMPORTANT!). Hope i have learned someone with stock moped that it isnt impossible to wheelie a restricted bike even though 95% of people you meet tells you that

[@lucasdinevski5495]

I have the same bike, Was it hard to wheelie and was it stock?

[@emlarun4337]

@@lucasdinevski5495 My bike was 100% stock. I had no modifications done to it, and it was brand new. It took me around 8-10 months to learn how to wheelie, and yeah, it was hard, But not impossible. It took me so long because nobody told me or learned me the right way to do it, I had to kinda "find it out myself"... So the answer to your question is: Was it hard? Yes. Was it stock? Yes. no modifications

[@lucasdinevski5495]

@@emlarun4337 Ive been trying to clutch it up but my front wheel arent moving do u have Any more tips for the clutch up

[@emlarun4337]

@@lucasdinevski5495 I think I mentioned all I know about wheelie that moped in my comment up there.. But as I said: Drive in almost stand still (1-2kmh) and then 1. Clutch in 2. Full throttle (on the revlimiter) 3. Compress front forks by taping hard on the front brake and move your body forward 4. (still full throttle) dump the clutch meanwhile you release the frontbrake and move your body as far back on the moped as you possibly can as fast as you can.. (you do all of this to get as much force to get the moped up as possible). AND it is very important that you switch from step 3-4 at the right time. Continue to step 4 when the forks are compressing the moped back up.. Well, I think thats it. It is all about practice, but these tips should help you

[@derbiracing111]

thänks for tpi

[@DTB-el9om]

Nice video I was thinking it's not possible on a stock 50cc derbi

[@yesman8478]

yes pull up yes ÅH JÄKLAR

[@doglaboi2010]

Where do you get plastics for Derbi Senda? I have a 2006 and have no idea where to get them from. Google only shows me Ebay....

[@shadowsparkzz3214]

Bold designs.

[@chernobylietis2025]

yo. nice vid. Do you know how to derestrict a 2018 Derbi Senda DRD Xtreme sm?

[@teun3526]

Yes pull the thing out the exhaust and maybe other cdi you can search yt for that

[@chernobylietis2025]

@@teun3526 i cant find anything on youtube. everybody just puts akrapovic's and yasuni's on. nobody talks about stock. u mean if i pull out catalytic converter out?

[@benniboy0663]

@Chernobylietis there is a little plate between the front and the main part of the exhaust. Take that out and you are finished. Sry for my bad explanation, i am an Austrian and don't know the names in english🙃

[@sica9633]

There are 4 blocks in the new derbi: the first is located in the control unit, I suggest you change it by putting for example a malossi k15, the second is located in the exhaust, you can do it in two ways, either you change the exhaust or buy the kit to remove the choke, the third is in the carburetor, just change the spray, the fourth is the pinion which as far as I'm concerned is good but many consider it short and therefore change.

[@ottopoika8525]

Remove restrictors from exhaust pipe or buy aftermarket exhaust, remove metal plate from intake manifold and buy non restricted cdi

[@ZebbiTubby]

kan detta skada mopeden på något sätt? Kan inte så mycket. Menar om man inte alls kraschar, kan det ändå förstöra eller försämra mopeden?

[@IceMotoSweden]

Det kan slita lite på kopplingen men annars är det lungt

[@flex_venrooij9484]

i have an stock aprilia sx50 from 2008 and it runs 60 km per hour it can run 70 without limiter but can you pull a wheelie with that because it doenst have so much power with the limiter

[@IceMotoSweden]

Yes, of you use the technique right. If you have Done a different gearing it might be a little harder but you can still do it.

[@derbiracing111]

good vid

[@IceMotoSweden]

Thanks!

[@ReelZtone]

"Some people think u cant wheelie 50cc stock, but u can" But u barely wheelied once?

[@IceMotoSweden]

You can look at Some of my later videos if you want to see Some wheelies

[@jayonvodka7600]

Barely?????? He got it high up wdym

[@ayrood]

what transmision is your bike? mine is 14x53

[@IceMotoSweden]

12x64 I think

[@jakub7609]

@@IceMotoSweden yea, so its not stock bike

[@IceMotoSweden]

@@jakub7609 I have 11x65

[@alme6956]

when I pop the clutch in an instant, mine doesnt have enough power ?? what should I do

[@IceMotoSweden]

Try compressing the forks and Then jump back on your seat and time the release of the clutch

[@TuukkaMaaninka-ez1rw]

Is regular system?

[@IceMotoSweden]

Yes

[@mrroa1516]

Æ har en derbi senda drd racing og en e trimma med rompa

[@ankibanki581]

är den urpluggad?

[@IceMotoSweden]

Nej

[@statblir9390]

Han sa väll att den var stock ett flertal gånger i videon?

[@jimi9084]

dom nya derbi har inte plugg, de har blindtarm

[@emlarun4337]

@@jimi9084 där har du fel. Derbi senda xtreme -19 (min förra) samt dom nyare årsgångarna av samma modell har inte blindtarm. Den har flera pluggar i avgasröret. En i kröken, en (räknas knappt) vid rörets början vid cylindern.. En i ljuddämparn, i cdin/ecun, i föggen osvosv. Men ingen blindtarm där inte

[@jayonvodka7600]

OHH …. 😂😂😂😂😂😂😂😂😂

[@melkerkalliola1431]

o jäklar hahaaha