drain the oil filter before you take it off. put a drain pan / small tray under the filter then punch a small hole on the back lower part of the filter. 90% of the oil will drain out.
@xlandscaper2 жыл бұрын
Excellent tip thanks for sharing, will be trying that.
@seanbrautigam3208 Жыл бұрын
I just drill a small hole in the lowest corner of the filter and catch it with a small container
@linksgarage19853 жыл бұрын
Good video man! Gotta get ready for ❄️ 🥶
@xlandscaper3 жыл бұрын
Thanks Bro! I hate winter!!! Need to move to FL where its boating season all year round
@linksgarage19853 жыл бұрын
@@xlandscaper I lived in Daytona for a couple years. Not sure why I ever moved. 🤣
@xlandscaper3 жыл бұрын
@@linksgarage1985 lol
@MichaelColey-h7l13 күн бұрын
hey man great video. question though, when i hooked up my ear muffs last year i noticed that the water never seemed to reach the top of the engine and go out the pissers. Any suggestions? should i maybe just hook up the hose and run the water for a little while and then maybe turn on the engine? thanks again
@xlandscaper13 күн бұрын
It could be a weak/ damaged or worn out water pump impeller or a clogged pisser. Take a paperclip or something and try poking the hole in the tell tale to see if anything is clogged. Hooking up the water and letting it run won’t build enough pressure to send it through the block. I have another video of how to change the water pump. I’d definitely check that out.
@MichaelColey-h7l12 күн бұрын
@@xlandscaper thanks again!
@WickedWood2 жыл бұрын
Great vid. I know there must of been some good footage you cut out while attempting to fill the lower with the harbor freight pump... lol I moved recently from Florida to northern Michigan after 40 years there. Winterizing and a shorter season was all new to me, but I would take these pristine lakes any day! over Florida's waters. No salt, no Crocs or Gators, no pythons and all the water you can dream of.
@DLeopoldi9142 жыл бұрын
NIce boat I have a 21se in the northeast. You shouldn't spray fogging oil in these type of 4 strokes, it will foul your sensors. They sell an efi fogging mixture that you mix with gas and run through the engine. I also like to put antifreeze in the bilge and tilt the trailer forward with the plug in and let the atifreeze go through the boat. Also missing the stabil in the gas.
@xlandscaper2 жыл бұрын
I run marine stabil the last tank of fuel and topped off with fuel and stabil before the video. I also jack the front of the trailer up high n clean out the bilge with liquid pool shock. Zero mold n dry as a bone when done.
@michaelwilson4862 жыл бұрын
The Yamaha owners manual says to spray into the intake silencer!
@DLeopoldi9142 жыл бұрын
@@michaelwilson486 suppose to run a fogging mixture through the boat for 15 minutes. If you fog with spray you run the risk of gunking the sensors
@Brizzleeeification2 жыл бұрын
Awesome video.
@xlandscaper2 жыл бұрын
Thanks for watching!!!
@gregschmid43752 жыл бұрын
Yamaha lower end fill threads are different than mercury fill threads. Be sure your fill pump includes the Yamaha fitting
@pablosevilla1197 Жыл бұрын
Poke a hole on the back of the filter with a cup to collect the oil in the filter. Then take the filter out with out spill.
@xlandscaper Жыл бұрын
That is a great tip. I’ll definitely be using that
@pastapaul150Ай бұрын
Sounds like your from L.I
@xlandscaperАй бұрын
One of a kind accent that can’t be hidden
@bh50948 ай бұрын
That’s not really winterizing, it’s just basic maintenance
@michaelwilson4862 жыл бұрын
I have searched everywhere for a video showing the actual fogging through the intake silencer and I was initially excited to find your KZbin video. Unfortunately this was a total waste of my time because you actual posted a video that showed nothing on the actual location and spraying of the oil into the intake silencer. Useless!!
@xlandscaper2 жыл бұрын
Im sorry that you think the video was useless. The camera footage froze and the file was corrupted. It was completely out of my control. I will still tell you how to fog it (because I am a nice guy) Just spray the fogging oil through the intake screen till it stalls out., that's it. Now that you know how to do it you can make your own video and become a youtube superstar and get awesome comments like the one you left. have a great day!