How To Wire A Single Switch And Add A Light

In this video I will show you the basics of how a switch controls a light and how to add additional lights to a existing light. Watch my other videos below for more electrical content relevant to this video.
How Is Your House Wired:
• How Is Your House Wire...
How To Install A Dimmer:
• How To Install A Dimme...
Strip Electrical Wire (How To Guide)
• Strip Electrical Wire ...
Disclaimer:
DO NOT ATTEMPT TO DO YOUR OWN ELECTRICAL WORK UNLESS IT IS LEGAL IN YOUR COUNTRY OR STATE. PLEASE CONTACT A QUALIFIED AND INSURED ELECTRICIAN FOR ALL ELECTRICAL WORK. ALL ELECTRICAL KZbin CHANNEL AND OWNER DOES NOT ACCEPT ANY RESPONSIBILITY OR LIABILITY FOR DAMAGE,INJURY OR DEATH. THESE VIDEOS ARE FOR ENTERTAINMENT PURPOSES AIMED AT AUSTRALIAN QUALIFIED ELECTRICIANS AND APPRENTICES ONLY AND ARE AN INSIGHT INTO BASIC ELECTRICAL PRINCIPALS AND COMPONENTS.
FOLLOW US ON:
KZbin:
/ @allelectricalau
TikTok:
/ all_electricalau
Facebook:
profile.php?...
Instagram:
/ all_electricalau

[@luhnschonefeld6943]

These are great videos mate, keep it going. I've been an electrician for +/- 27 years. My son is now my apprentice and I have recommended your videos to him. Although he is getting heaps of on the job experience, these videos will also refresh his memory.

[@allelectricalau]

Thanks for the great comment mate these videos are targeted for you guys especially not the public.

[@neilmcdonald7824]

Thanks heaps, a bunch of other videos were too intricate and confusing. Yours was straight to the point, i appreciate that.

[@allelectricalau]

Cheers legend

[@dombarton2483]

Excellent once again..Fan installation would be great.

[@allelectricalau]

Thanks mate! It's on the long list

[@lawrencedunn]

Mate, this was a really great explainer! Thank you!

[@jordanle8691]

THANK YOU!!! for making these videos you’re a legend

[@allelectricalau]

You are welcome 👍

[@elijahcateris6300]

Great video mate, I’m sure a lot of the younger boys will understand this 👍

[@allelectricalau]

Thank you mate! I tried to make it nice and simple for the apprentices.

[@Heshu47]

Good stuff Bud.. Thanks a lot

[@allelectricalau]

No problem 👍

[@Jean-bj5md]

Well explained mate thank you This helps a lot especially as an apprentice

[@allelectricalau]

Thank you! The channel is targeted at apprentices and electricians so i'm glad you found me 👍

[@bonaminhrasmey42]

❤thanks for sharing your video 😊

[@allelectricalau]

Thank you for watching 😁

[@ow3n25894]

Sweet vid mate!

[@allelectricalau]

Cheers!

[@1mach28914u1]

Can you do a wiring diagram for both ways of adding an extra light please. Thanks

[@pankajsinghpankaj]

Great video. How to replace a single switch with double power outlet with extra switch?

[@josephdignam123]

Dude your videos are fantastic and I’m certain you have already saved more than a few lives in the process. Like all Sparkies I know, they understand the law but understand reality even more so. As if I’m going to call a mate in or call a sparkie to change a light fitting or a wall switch…. Come on. Very hard to find info online regarding Australian / NZ circuits so you are filing a big gap here too

[@danielbass09]

For connectors. What do you think about wago 221 connector. Waiting for the day they become standard rather than the old connectors. Easier to disconnect and reconnect.

[@chrisyelland3887]

Thanx mate

[@retroonyoutube5402]

Great video mate. I have a faulty light switch from a house built in the 70's in AU however it looks like theyve gone with Switch #2 looping. I pulled the switch away from the plaster and noticed two reds, one going in each port (which i am assuming will go in C and the one beneath, but then there are two blacks twisted together and going into another port. Am i correct in assuming these are currently in the LOOP socket in the old light? Cant really see much on it since its such an old plug and dirty as heck. Reason for replacing is im hearing some static spark when flicking this light on so we've stopped using it until it can be replaced. Thanks

[@orlandob662]

Why didn't you plug the live wire from the hard active box I to the L connector of the bottom switch ? Because you connected it to the L in the upper lightbulb... I would have expected the same move in the lower example.

[@gaviakobos]

Thanks for the video, you make it easy and simply to understand. One question I have, How many lights can you daisy chain from one switch? I'm thinking of a number of lights (LED's obviously) (6 prefer 8) for my garage so I don't get shadows when working at my large L shaped Bench?

[@allelectricalau]

If they are LED you can put as many as you want to be honest. They only draw about 5watts each

[@bonaminhrasmey42]

How would you extent wire switch to your garage which has 1 light switch and 2 power points, thanks 😊 👍

[@user-wd4zi7hs2v]

Hey there man, I just had an question on the second option you pointed out since I just started an VET course to become an electrician, I was just wondering if it matters where you put the red part in the light switch, because we had an practice session and I couldn't understand what I did wrong. Also, does the one connected to the power have to be in control and the one connected to the light bulb have to be in 1 or 2, And if not, would it still work if I were to put the red wire from the light bulb to the control and the red wire from the power to 1 or 2, would this way still work ? I also don't understand where the common, 1 or 2 is within the light switch since it wasn't pointed out in the material we use in the course. can you please give me any tips on these or any other ways to try and make it easier for me? Sorry for wasting up a bit of your time but I appreciate you trynna help us rookies, much love❤

[@timg6850]

That last graphic about extending the circuit with the loop at the light method doesn't look right to me. Wouldn't you take the Active from the loop terminal as it is unswitched to extend the circuit ?

[@allelectricalau]

Good question you are correct if you were to continue the circuit. But you take it off the white switched active if you wanted to add a light.

[@amicus6119]

Do you favour 1.5mm over 1mm? Or is it just situation dependant?

[@allelectricalau]

1.5mm2 is what I prefer because it's stranded cores and wont brake as easily. 1mm2 has one solid copper conductor and if you over tighten terminals you can brake the cable. 1mm is cheaper so it would be still used in new houses. But some sparkies are very against using it like me. Its worth spending the extra money to be honest for peace of mind.

[@OziBlokeTimG]

Legg.

[@allelectricalau]

Legg?

[@TomekBlacksMyth]

Legend. 😂 Lejjj. Speak bogan.

[@davidhkchng]

Huh????