HOW TO WIRE AMPLIFIER FOR CHUCHERO

[@Autotechno17]

This the most helpful video I’ve found in a while bless you guys thank you

[@vipautonyc-chucheroworld-jimmy]

thanks for commenting and watching the video 😊

[@djflipguyanasounds5577]

How did you wire the tweeters and driver in the box

[@justinthegamer2559]

How would it be if I want to add a chuchero and I have door speakers and a subwoofer?

[@vipautonyc-chucheroworld-jimmy]

adding a Chuchero product is exactly how you installed the subwoofer amplifier. You need output from a full range speaker or signal from aftermarket radio

[@vipautonyc-chucheroworld-jimmy]

You can add a chuchero product to any car audio system regardless of vehicle make, model, or trim level

[@andydominguez3902]

What about the audio part like setting up the car speakers with the rca or is that not needed for chuchero

[@bito2098]

That goes to the amp

[@shaytovensdetail]

Helpful 🙏🏽

[@vipautonyc-chucheroworld-jimmy]

thanks for commenting and watching the video 😊

[@los8094]

how would u go about using 2 different amps lets say 1 amp just for the speakers nd 1 amp for just the tweeters how would u determine which cables go to which?

[@vipautonyc-chucheroworld-jimmy]

you can use 4 channel amplifier, use 2 channels for midrange, other 2 channels for horn driver + tweeters

[@YktvTommy]

what about for two chuchero setup ? Do I need another AMP

[@vipautonyc-chucheroworld-jimmy]

that depends on what your chuchero requires, a chuchero product can be single, two, three, four channels.

[@vipautonyc-chucheroworld-jimmy]

in this video the chuchero product requires only 2 channels, using a 4 channel amplifier

[@ChristopherThebaud]

Do you have number where you could be reached i need help with mines

[@vipautonyc-chucheroworld-jimmy]

reach out to me on instagram

[@jordansevilla8231]

Can I connect a 8 pole like that? Im confused to how I should connect them

[@vipautonyc-chucheroworld-jimmy]

yes of course you can wire a 8 pole/ conductor cable. A four channel amplifier has 4x outputs. *a four channel amplifier can also output 2 & 3 channel as well.

[@Bigislandguy]

What type of speaker wire are you using. Mine amp is rated 300x4 or 600x2 rms. Should I use 12 or 14 gauge Speakon cable?

[@vipautonyc-chucheroworld-jimmy]

using 4 conductor copper speaker cable, 16 awg is perfect. using 12 or 14 awg or larger would not improve performance unless your amplifier was more powerful.

[@Bigislandguy]

@@vipautonyc-chucheroworld-jimmy I I I Iwas thinking 12ga was over kill. Do you know about how many watts 14 and 12 gauge can handle? Runs are short 6-12’max

[@vipautonyc-chucheroworld-jimmy]

@@Bigislandguy we use 16 awg for up to 1000 RMS per channel 14 awg up to 2000 RMS you could probably Google search for a more accurate description

[@Bigislandguy]

@@vipautonyc-chucheroworld-jimmy thanks. so much garbage to filter through now days on google

[@marcelinoandrade7976]

Are you putting both -1 And +1 in one Channel and same fire -2 and +2

[@vipautonyc-chucheroworld-jimmy]

yes correct, all 4 channels are bridged

[@MiJARDINDEROSAS1987]

can put two in the some amp or each chuchero need the amp

[@vipautonyc-chucheroworld-jimmy]

same amplifier as long as you so not exceed loads impedance and your powering similar speakers

[@vipautonyc-chucheroworld-jimmy]

reach out to my ig if you need further assistance 😊, I can answer faster on IG 😊

[@MiJARDINDEROSAS1987]

@@vipautonyc-chucheroworld-jimmy i used 4 plugs and i have other cable 8plug but i don t conect yet you thing can used like that i hve two chucheros 12

[@vipautonyc-chucheroworld-jimmy]

@@MiJARDINDEROSAS1987 yes, 2x channels for midrange speakers - 2x channnels for compression drivers and tweeters with you 8x conductor cable/ connection

[@kevingonzalez5662]

How do you set your gains for the horn driver

[@vipautonyc-chucheroworld-jimmy]

Adjusting the gains/ input level has nothing to do with what is being amplified. You want to match to the source that is coming to the amplifier. You must adjust crossover frequency accordingly to what is being amplified.

[@nick_sometin7791]

Do i tune on amp or head unit

[@vipautonyc-chucheroworld-jimmy]

both would have to tuned

[@Kelvin-zy9sf]

Are u still able to run sub on a 2 channel

[@vipautonyc-chucheroworld-jimmy]

yes it is possible, but not recommended