How to Wire connection of xm18 controller for incubator - xm18 wiring

Disclaimer = Please don't repeat anything shown in the video it is only for education purpose ,whatever you do is your own responsibility.
I am showing the wiring of xm18 controller which is easy to make I am using the 60ktyz motor as turning motor and ultrasonic humidifier for humidity and halogen bulbs as heater for wiring and checking ,it works perfectly and nicely it can be use in incubator and cages for controlling temperature ,humidity and egg turning which is automatic system.
0:00 Basic wiring
2:00 Complex wiring
2:48 Fan wiring
3:25 Motor wiring
4:44 Humidifier wiring
5:16 Alarm wiring
7:13 Turning on
7:56 Turning off alarm
8:21 P Internal settings information
9:50 F internal setting information
11:00 Factory setting
11:15 Temperature setting
12:20 Humidity setting
#xm18 #xm-18 #xm18wiring

[@danielagyapongmensah8531]

Best video so far. Thank you

[@Umairworkshop]

You are welcome

[@addismolla5930]

Thank you. You did give us good lesson

[@Umairworkshop]

You are welcome

[@coloursoflife2735]

Very easy for understand as breefly explain by you sweet bro thanks ♥️

[@Umairworkshop]

You are welcome

[@gainde6452]

good job sir. You are the best

[@Umairworkshop]

Thank you

[@user-du4up5zx2i]

Thanks for the assistance Help me to set how I can set time to town eggs

[@Umairworkshop]

You are welcome, you can press the set and down button and the f1 settings will open there is a egg turning timer setting ,here is the information might help kzbin.info/www/bejne/lYStZaCmgMmqr6M

[@discovertech1250]

We love you and ur channel. One 😘

[@Umairworkshop]

Thank you

[@maliksallu5500]

Good video brother

[@Umairworkshop]

Thank you

[@sameerrza728]

Good video bro

[@Umairworkshop]

Thank you

[@imranpasha3646]

Awesome

[@Umairworkshop]

Thank you

[@dilipkumarsardar6654]

Very nice video

[@Umairworkshop]

Thank you

[@monarchsullano6125]

Brother, is this kind of thermostat, still need to be calibrated or not??regarding with the temp. If the set value of the temp. Is correct??

[@Umairworkshop]

It is factory set no need to calibrate

[@umartahir007]

Brother you have perfectly explained everything!!! Kindly tell me the setting of inner and exhaust fan plz.

[@Umairworkshop]

The inner fans are direct working 24 hours ,only exhaust is controlled by the xm18 for maintaining heat inside and ventilation which is already set

[@umartahir007]

@@Umairworkshop And 1 more thing which type of aluminum sheet (market name) should be used in incubator?

[@Umairworkshop]

@@umartahir007 you can tell them you need a almunium sheet for bathroom door which protects from water

[@user-qd8lo3jo1h]

it so clear😃😃

[@Umairworkshop]

Thank you

[@elenitasuzuki6385]

Good day sir, very detailed video ,may I ask where can I buy the egg turner assembly that you use, thank you

[@Umairworkshop]

You are welcome, These trays are available on online sites as well same as this controller

[@LuisRamirez-fy4lh]

How would I wire 110v version would the com be live or neutral wire ?

[@Umairworkshop]

Com is for neutral wire only

[@LuisRamirez-fy4lh]

@@Umairworkshop just received mine does it make small rattle noise when you shake it a bit?

[@kurt3166]

Hi mate any reason why the humidity sensor won't work. I have wired it up correctly but it says EE for the humidity level. could the Humidity sensor be faulty?

[@Umairworkshop]

Yes it might be a problem with the sensor

[@WonderWares]

Do exhaust fan and inner fan are connected in same port or not please cleare that

[@Umairworkshop]

No , inner fan is connected directly from outlet

[@tullyriverquail]

Q: on my XM-18D (110V) there are two pins labeled "12V" + and - (red/black). Do you know if this is an optional 12V "IN" similar to the 110V "IN" on the opposite side of the lower connectors, should I choose to control all 12V equipment? Are they just labeled to (save on printing costs for the schematic sticker) and only functional if I would have gotten the 12V version vs the 110V? Or is this a 12V "OUT" power supply should I wish to install an external switch and perhaps 12V internal light or manual 12V fan?

[@Umairworkshop]

I tried to connect a cpu fan but it doesn't work then give 12v to it nothing happens also

[@tullyriverquail]

@@Umairworkshop yes. I checked with a Voltmeter. I assume the company printed one label to use for their 110V and their 12V versions or models. If mine were a 12V version, the 110V "INput" would be a dead terminal pair.

[@irvingcastro6507]

great video! thank you what size of wire do you use?

[@Umairworkshop]

You are welcome , it is 23/76 gauge wire

[@basil277]

Thanks for the educative video sir, my question is: assuming you have a larger incubator, and you need two turner motors, can you wire two motors to a single Controller?

[@Umairworkshop]

You are welcome, yes same wiring of the first motor connection can be attached to second motor as well

[@TECHOLAX]

Thanks for all your videos. My question is: can i use w9002 instead of xm18 though it doesn't have exhaust fan slot? I need to put it in a big incubator where exhaust fan is important. And it doesn't have the slot. But i need it because it is cheaper

[@Umairworkshop]

You are welcome, exhaust is a very needed option in big incubator in case temperature rises up it will on the exhaust fan to throw excess temperature, if you are making big incubator consider xm18d

[@tullyriverquail]

How come momma birds don't adjust their humidity when hatching, or do they by never getting off the eggs during a natural "lockdown" phase? Asking for a friend :)

[@marcelopadillaopplig]

Thanks for the video. What happens is there is a power outage?

[@Umairworkshop]

After 3 hours of power outage eggs will stop developing

[@manoelalmeida2043]

Vou comprar um, porque e completo. Brazil

[@Umairworkshop]

Okay

[@manoelalmeida2043]

E só xm-18 ou tem mais algum referencia?

[@malickfall2709]

Hi..nice présentation !!! where Can i buy this model of mistmaker

[@Umairworkshop]

You need to search it is model number on Google

[@deepakpatel4036]

sir sabhi saman ka detail de sakte h kya

[@Umairworkshop]

I made a series of information like these you can search in channel kzbin.info/www/bejne/nZKZfWpnpqaHgbs

[@abdennourbekhtiar9319]

What is the warning mission for point 20?

[@Umairworkshop]

That is for alarm can attach 220v siren in 20 and com , so it will siren when temperature low or high

[@firoz5523]

Umair bhai urdu me bataya karo bhai pl

[@Umairworkshop]

Okay I will in next videos

[@mondayflix8389]

Good vid bro, so please explain difference between exhaust fan and air circulation fan....does incubator need air holes for ventilation

[@Umairworkshop]

Air circulation fan is supposed to work 24 hour and there is no connection socket for that , exhaust fan is suppose to work when temperature increases, yes need to place a fan throwing air outside by making hole in incubator body

[@mondayflix8389]

@@Umairworkshop Thank u brother and can you stop the motor from rotating when the chicks are starting to break egg shells so as to stop movements and proper hatching

[@mondayflix8389]

Again thank you

[@Umairworkshop]

@@mondayflix8389 you can plug out the motor wires from the tray or by installing bed switch with wire

[@Umairworkshop]

@@mondayflix8389 you are welcome

[@danishnoor9883]

Kitne watt tk ka heter laga sakte hain

[@Umairworkshop]

Around 2 thousand watts tak ka heater laga saktay hain

[@romelcatalogo8022]

How to run the fan and no left and right motor

[@Umairworkshop]

If you want to run the fan then you need to place in Ground and 220v same where controller getting power so fan will keep working 24 hours

[@BlackLabelMorphs]

Do you if there is way to change the controller from celsius to fahrenheit?

[@Umairworkshop]

This xm18 only works on celcius

[@BlackLabelMorphs]

@@Umairworkshop ok thank you for your help.

[@ahmadmr5779]

Hi, can you please help me. I have automatic egg turner tray with 2 wire motor, i connected them one to 18 and the second to 17 but it didn't work, then i tried to contact one to 17 and second to 15 it worked but only to the left side, any ideas?

[@Umairworkshop]

It is suppose to work on 3 wire motor but can also work with 2 wire motor but will only trigger one side for that motor , it will work fine no problem

[@yahayaibrahimmohamedallaou5843]

I have the same, my question is the following: the wires of the temperature probe have no particular distinction, both are black ???? (a particular clue on the wire that goes to 5 and 4)

[@Umairworkshop]

It can be connected in any socket of 4 and 5

[@tullyriverquail]

There is no polarity for temperature sensor probes. They are not "powered" (humidity sensors are powered by 5V and therefore, require color coded wires).

[@aqualifeaqualife6875]

Please brother bohat din sy esku wiring ki urdu video Dhund rha hun.... Please thori c or mehnat kr den urdu me video record kren Allah apko ajr dy mery bhai

[@Umairworkshop]

Okay I will try

[@onlyaseelnoterlas1957]

Bro my rolling tray motor has only two wires now which one wire I should put into 15 (neutral)

[@Umairworkshop]

You can place any wire in the left or right and other wire in com

[@clearancechirwa9364]

I'm from South Africa 🇿🇦 where can I buy the xm-18d? Please help

[@Umairworkshop]

You need to search on Google if someone in your country selling it

[@clearancechirwa9364]

@Umairworkshop is been a year now trying to get it with no luck. I've been scammed several times. Please help brother

[@Umairworkshop]

@@clearancechirwa9364 you need to get it from Ali express please search on KZbin how to order from there

[@user-dv2cr6yn9f]

Now you are from any country and is there an export of a control panel ready and full of cables and how many dollars?

[@Umairworkshop]

Sorry cannot export , you can search on Google for this controller and local electrician to wiring

[@tullyriverquail]

Note that ALL wires controlling the relays control 220v equipment. The heater, the turning motor, the humiditifier, the fan, the light, etc all must be 220v (or 110v if you have a US/110v version). You cannot connect a DC 12v (or 24v) piece of equipment directly to this controller unless you wire an 220(110v) power outlet, and use a transformer adaptor (known as a "wall wart", the black box at the end of the plug). Each DC item will require its own transformer - 12v or 24v power supply as you would burn up a DC item with 110v or 220v AC. Note in this video, the egg turning motor is 220v. When buying you're incubator equipment, try to stay with a uniform power requirement instead of mixing AC and DC items for ease of installation. I've created a modified power strip that is easily removed for cleaning between hatches and also allows for replacing failed equipment on the fly should a fan, motor, or humidity unit fail during a hatch. Consider running an external alarm to inside your home (or WIFI) so you can be notified quickly, and also consider having back up equipment ready on hand. Things break when you don't want them to!

[@Umairworkshop]

Thank you for good information

[@brucenelson9404]

I have found it pretty challenging to find a 220V humidifier in Canada for a decent price...most of what I have been able to find states right on the Ad "NOT FOR USA". I am in Canada but I suspect the CSA Regulations are equal to if not higher than the USA. Do you know of a similar Controller in 120V?

[@Umairworkshop]

@@brucenelson9404 it comes in different voltages you can search on Google if it is available international

[@edwinbiika268]

Why are we to install 2 heaters? What is the power of each of them? Suppose I increase the size of the incubator does will the amount of electricity increase also?

[@Umairworkshop]

1 heater is big heater which work when needed second heater work as to manage the temperature to stay on 0.5 degree difference and will always turn on , yes it will consume more electricity

[@user-dv2cr6yn9f]

هلأ انت من اي دوله وهل فيه تصدير لوحت تحكم جاهزة وكامله الكيبلات وبكم بدولار

[@Umairworkshop]

You can search on Google

[@edwinbiika268]

How can I stop and start motor rotation during and after lock down?

[@Umairworkshop]

You have to place a male female connection when joint with motor

[@edwinbiika268]

@@Umairworkshop thanks

[@musbahuumar8418]

Hello my problem is that, I bought this controller thing that it's Dc, I want to connect it directly to solar. Please how should I convert it to dc ?

[@Umairworkshop]

You can use Inverter for that purpose

[@rafainshah8762]

Brother, it's me Rafain Shah from Hyderabad. Well brother I need it urgent because I have khaki Campbell breed ducks and they started eggs. I have so many orders for chicks I have to fulfill them so please help me in this matter. And one more thing how can I contact you Sir?

[@Umairworkshop]

Salam , please see the description of this video

[@gulzarkhan8860]

Brother, i have a question, exhaust fan is ok, but where is the circulating fan? I have ZL 7918 A controller. 🇱🇰 Thx

[@Umairworkshop]

You need to install the circulation fan separately or you can place it's wire where the xm18 getting 220v

[@gulzarkhan8860]

@@Umairworkshop Appreciated your reply 🇱🇰 Thx a lot

[@rodrigomartinez6952]

How many volts is the fan???

[@Umairworkshop]

Fan is 220v 15 watt fan

[@abdullahisengyadu5924]

Please sir what's the difference between xm 18sw and this One??

[@Umairworkshop]

Xm18sw have a wifi connection and added feature

[@YEGODFIRST]

Hi , ET on my controller doesn't work can you help me?

[@Umairworkshop]

The ventilation should work if high temperature if it still it work then change the fan otherwise faulty in xm18

[@yahayaibrahimmohamedallaou5843]

follows

[@Umairworkshop]

Thank you

[@jpwonders1742]

I have one question if you could please help me mine is a roller tray not a left and right movement it rolls the eggs in rollers and the wire is red and black only where would I put those in which numbers in the unit and also for the bulb the third one that is like an alarm do I have to put that and what is that for? If so what else can I use if I have to use that then the bulb

[@Umairworkshop]

If the egg Turner is 220v then one wire in com and other wire in 17 it will only trigger at one side, for the alarm it is supposed to be a bell which is one wire in com and second wire in 20 , for further understand please search xm18 wiring on Google images

[@jpwonders1742]

@@Umairworkshopone more question sorry does the unit control the humidity as well like turning off the humidifier when it’s high and on when it’s low on the unit can you adjust the humidity too also one more thing on the unit can you add the duration the turning will last and each hour the rotating should rotate the rollers for the eggs

[@jpwonders1742]

⁠@@Umairworkshop also my fan is 12v so should I wire it like you did to the terminal and the other wire to 17

[@Umairworkshop]

@@jpwonders1742 yes it will turn off the humidity and turn on the ventilation fan to manage humidity, yes can adjust egg turning time

[@Umairworkshop]

@@jpwonders1742 it is given output of 220v if you place 12v directly it will burn please place a power supply before fan it will work fine

[@amnaasim1266]

Aoa bhi

[@Umairworkshop]

Salam, yes what is the question

[@chakraniworksgroup664]

Sir is key price kia hai

[@Umairworkshop]

In sub items Kay information is video mein kzbin.info/www/bejne/jIGtiIKOq5iNbbM

[@chakraniworksgroup664]

@@Umairworkshop already whach video

[@chakraniworksgroup664]

@@Umairworkshop thanks

[@pochampallyikkathweaverswo1354]

Bro i created a incubator it successfully running but Thier is current cutting problem,if i want to buy battery it is a high price,i can't invest that much money,pls tell me a solution pls bro

[@Umairworkshop]

You mean load shading or current fluctuation

[@pochampallyikkathweaverswo1354]

@@Umairworkshopno bro, current problem ,in a day their will be only 18-20 hours current will be Thier

[@pochampallyikkathweaverswo1354]

@@Umairworkshop i need a mini inverter bro please tell me one solution

[@Umairworkshop]

@@pochampallyikkathweaverswo1354 you can search mini inverter on Google

[@bashirahmaddrabu2180]

Worst sound quality

[@Umairworkshop]

Sorry about that