How to Wire your LED Products to Use With Ford Raptor Auxiliary Switches

This is a tutorial on how to wire your LED light bar or LED fog lights onto a Ford F-150 Raptor to use with your auxiliary switches. Many Ford Raptors come equipped with built-in switches inside its cabin that allow you to control a variety of electronics, depending on what you want to hook up. Performing this method of wiring will give you an easier time than routing a switch through the firewall and choosing a mounting location.
Follow us on social media!
FB: / ijdmtoy
TW: / ijdmtoycom
IG: / ijdmtoy
G+: plus.google.co...
PIN: / ilovejdmtoy
Blog: ijdmtoy.com/BLO...

[@The1GWP]

Nice job helping your fellow owners out. Thank you. Ignore the thumbs down, those ppl are mad they have a F150 with a amazon knock-off Raptor grill.

[@Rome_504]

😂🤣🤣 right... I agree

[@defensiveandprotectivesolu7525]

I used this video to wire rigid lights on my 2018 Raptor and this guy is spot on. This video saved me a ton of time. Thanks for taking the time to put this info out.

[@SATXrattlesnake]

I only have a poor man's raptor (tremor), hopefully this will be useful information for when I install some additional lights for off-roading

[@richsanderson9103]

My 2018 Raptor was just like yours. Thank you so much for posting this video.

[@charlesmeaux3954]

You have a second gen Raptor. That smaller bundle was left over from the Gen 1 where you had to connect those to the switches where the bundles terminated under the glove box.

[@smeacraptor6641]

Why dont they just have a quick connect to the upfitter switches? That way whatever aux add ons we have for the raptor can just snap right in?

[@NoFalseDoctrine]

Good video, you're lucky my hotwires are under the dash were you barely can get your hands too where I had to jump the power but at least Ford was nice enough to put the pass through wires under the hood also.

[@jamesh2640]

This helped me out today. Thanks!

[@shawnhanifan2500]

I just installed a set on my 2018. Build date was August 2018. My wire colors were the same as in this video, and not what was printed in supplied booklet.

[@hernilsoriano4873]

Thank you…so much I just got Raptor

[@Shadem16]

Where is the relay for these wires? I found the fuse for each. My wires are not hot (either set) so there has to be a relay missing

[@Sanjuk0522]

what gauge is the aux wires? can i hook up 14 or 16 gauge wire using crimp butt connector?

[@Ellacost831]

Are the 2017 Raptors different? Do you think that’s why the book had the colors wrong and also the location of the hot wires was different?

[@invasion1824]

Hello sir, I bought a set of Baja designs ditch lights for my 2019 ford raptor and I bought the set that comes with the universal harness. Can I just connect it to the raptors auxiliary switches just like you’re doing or do I need to buy the harness especially for the raptor? What’s the difference? Thank you.

[@rvboyett]

kinda lame to use someone else’s vid and not give them credit.

[@videosourceonebusinessacco5438]

You really need to just use the hot for a relay and hook the power to the battery...15 amps is not enough to run lights hard...nor is the gauge correct.

[@mamixon17]

Nice use of the middle finger. Lol

[@davidtyra6243]

If I may ask ? This color code book for the wires this book come with the manual

[@TheTJK002]

i have a 2018 and it only has 1 set of wires now and its was very simple

[@zackmessmer5158]

Where did you run the grounds?

[@kaesenvinson8421]

Where and how did you ground?

[@bryanbyrd111]

Fuck I wish you would’ve shown the fuse locations for those auxiliary switches

[@ChristianGrest]

Stole this video from another KZbin channel...Douglas Fernandez.

[@douglasfernandez7996]

I don't mind . I am more interested in getting the information to the public. Too bad they didn't show the complete video where I explain how you don't need to use the aftermarket relays and fuse holders because Ford has already prewired them. Thank you for your concern.

[@ChristianGrest]

@@douglasfernandez7996 You did a great job! Just hate seeing folks blatantly take something and broadcast as their own.

[@blue72nova]

This person stole the video from the following link: kzbin.info/www/bejne/rpfHZqGtj9Bjn5Y You can go to his page and comment if you want a response.

[@flajax9122]

Way to steal someone else's video. I was about to order your products, not any more.