How we add a Hi to low adapter for car stereo amplifier

Get the best test tool for car audio the iRTA2 here
www.dandftoold...
Get your shirt here www.dandfswag.com
Visit Dean and Fernando's Tool drawer for a all your install tool needs
www.dandftoold...
If you like what we do, support the show at Patreon-
/ fivestarcarstereo
Our Social links if you want to keep up with us
Facebook- / fivestarcarstereo
instagram- / 5starcarstereo
Dean- / deanbeyett
Fernando- / mr_lopez13
twitter - / 5star_carstereo

[@smiththers2]

This is a very good recap of the information from the class you just did at kfest!

[@gazjones2238]

I watch you from over the pond very informative keep up the good work guys

[@RJSDZNS]

Love these types of videos! Thanks guys!

[@jms7585]

Always awesome!

[@marcwarmuth5814]

6:35 Dean I think you said “Accubass” but meant to say “GTO” aka “great turn on”, when talking about DC offset turn on and Audiocontrol in particular.

[@FiveStarCarStereoInc]

Yes

[@kylevanwinkle2081]

I wish yall would make the rta work with android or at least pc

[@davidwentzell5416]

Question Dean: which brand 4 channel rca interconnects do you recommend? Love all the vids. You an Fernando are awesome.

[@FiveStarCarStereoInc]

We use Stinger at the moment

[@kylevanwinkle2081]

Knuconceptz Krystal are great bang for the buck

[@rpm172]

Is ANC akin to Transposer in the Ford Fiesta?

[@JasonWW2000]

3:30 Looking at the low end roll-off, the customer might be better off using the Kicker Key 500 amp. 😊

[@JasonWW2000]

Oh, the Rockford P300 is a sealed sub with built in amp. I thought it was just an amp. A Key 500 is probably out of their price range.

[@JasonWW2000]

I found that sealed enclosures in the back of a SUV tend to have very narrow bandwidth. Have you guys found the same to be true?

[@jdipo16]

Does the DC offset effect the audio coming from the speakers?

[@JasonWW2000]

No, not at all.

[@jdipo16]

@@JasonWW2000 how though? Doesn't DC voltage move the speaker in one direction? Like if you put a 9v battery on a speaker to check polairty it moves the speaker out in the + direction it moves the speaker in for the - direction

[@melissathompson7229]

Signal on a speaker wire is AC. The DC offset is just a 6 volt DC signal on at all times from the cheap "chip" amp built into a headunit

[@JasonWW2000]

​​​@@jdipo16I think I see the confusion. There is not a DC signal going across the two speaker wires. Either one or both of the speaker wires has the positive 5 or 6 volt signal, but the circuit has to go through the amplifiers ground cable. This is why when you're checking for the DC signal you put one probe on a speaker wire and the other to chassis ground. That's the only way you're going to see it. Only a special circuit built into the amplifier can detect that DC offset signal. The speakers are completely unaffected.

[@ElStriker777]

🔥👍