How we organised a PELI TOOLCASE for less than £30

In this video we took a broken and tired #Peli Case, exchanged it under its lifetime warranty for a new one, and then re-organised all of the existing tools in #ShadowFoam. It took one standard sheet of Shadow Foam to complete this project costing £23.99.
If you would like to get your toolbox or tool case organised, grab a free of Shadow Foam at Made possible with Shadow Foam, get a sample here:
www.shadowfoam.com/sample
Shadow Foam Creations are a showcase of how you could use Shadow Foam. We use standard and custom size sheets that are available for you to buy, so you can make your own creations just like us!
Have a SUGGESTION of what you want to see NEXT? Comment below!
SUBSCRIBE for more videos:
bit.ly/2RfciYP
MISSED the last video?
• We Gave Boxes of Poo t...
Made possible with Shadow Foam, get a sample here:
www.shadowfoam.com/sample
Shadow Foam Creations Playlist:
bit.ly/2FeO7mS
FOLLOW US ON
Facebook: / shadowfoam
Twitter: / shadowfoam
Instagram: / shadow_foam
KZbin: / shadowfoam
Music:
Brash Gentleman by Tomas Herudek
Music by Assaf Ayalon
#toolbox

[@ShadowFoam]

Want to try Shadow Foam for yourself? Or maybe you don't know which grade to order? Pick up a sample to try for yourself: www.shadowfoam.com/sample

[@BeInspiredwithDominic]

Cool to see actual use cases. I have some ideas on how to implement Shadow Foam in my shop, thanks to your demonstrations at Makers Central! Thanks for sharing!

[@ShadowFoam]

Be Inspired with Dominic no problem, I’m glad you enjoyed the demo 😀👍

[@iansteel6403]

Your foam looks great, but (though distressed and made with inefficient tool spacing) the original divider trays are absolutely amazing. So rigid and some of the best hybrid designs with the back metal I've ever seen.

[@ShadowFoam]

Our newer foam since this video is also rigid and dense, allowing tools to be held firmly.

[@chriscolameco6850]

Does stuff ever fall out of the lid?

[@TimoteusRuotsalainen]

Do you need extra backing material for the removable trays? or is the foam sturdy enough to support the tools by itself?

[@ShadowFoam]

Depending on the weight of the tools, you can get away without a backer, however you can add one for extra stability. If you don't want that, check out Easy Peel! It's sturdy enough to make trays from! 😊

[@TimoteusRuotsalainen]

Just ran into my own comment on accident. Easy peel sucked. Looks and feels cheap. Almost like packing foam.

[@Maxb49]

Nice! How long does that foam hold up?

[@ShadowFoam]

Its been years now and it shown no sign of wearing out yet!

[@scottdempsey2627]

Is the foam you are using 30mm or 50mm?? Thanks!

[@th3maxx318]

Awesome. We have no clue. Super informative video. It made me decide to go with kaizer or whatever the other foam guy is.

[@andrewweir914]

What would you recommend to attach the foam in the lid with? I have a similar set up with my box and the foam has a habit of falling out the lid when I open it! Double sided tape? Some form of spray glue?

[@ShadowFoam]

We have used a number of techniques to do this, it depends if you want a permanent solution. If you do, we have a spray adhesive that we sell on our website. Alternatively, we have used strong double sided velcro, this means you can take the full insert out form the lid if you want to.

[@Thatboiiikellz]

What the name of the divider trays?

[@butchgreene]

Cutting out a circle all the way through the foam on opposite corners would make it a lot easier to pop each foam tray out.

[@ShadowFoam]

Good idea!

[@butchgreene]

How did you get the foam to stick in the lid????

[@ShadowFoam]

General adhesive would do the job, nothing too heavy but generally if it's cut to fit, it wedges in there snug.

[@joedimaggio3146]

Can anyone tell me how to make a label like the one on the box? Where it says "POTTER RaBE Race Cars". Is that embossing tape?

[@ShadowFoam]

Looks like it to me!

[@peterevans8194]

While I love the way the foam holds the tools, the stacking concept within the case is hugely impractical. To work on a bike or whatever,, you would essentially have to remove every layer and have them later out so you could access the tools as needed...

[@ShadowFoam]

Most used tools on the top layer, then less used further in the case. This doesn't work for everyone, but you're right, sometimes you will have to take the top two layers out to get to the right tool

[@barrettbailey]

Sure beats the time it takes finding tools in a box with tools just throw in though

[@Jimanderson124]

How is this impractical. This is very well organized and pull out the tools you needed in the slot with ease, rather than your trash digging box of shit.

[@victorortega2718]

When you close the lid how do you prevent tools from fallin ?

[@ShadowFoam]

The foam grips the tools!

[@victorortega2718]

@@ShadowFoam mine don't

[@snosrfr71]

Without handles to lift the foam layers, this is not very practical. Have you solved for that?

[@ShadowFoam]

Our new product Easy Peel is much more suitable for using as trays. It's a rigid foam so there's no need for handles or reinforcing with a tray underneath

[@sherischneider2390]

@@ShadowFoam Some people attach flat nylon straps under the trays

[@ShadowFoam]

@@sherischneider2390 what a great idea!

[@moviseen777]

I need this, how to bay case

[@StrikerGaming9080]

Can i have that too fix things i rly need those pls giveaway

[@ShadowFoam]

Striker9080 Gaming I’m sure we will give away a toolkit at some point, this months give away is the PS4 case with built in screen. Next month will be a custom nerf gun, however the next month will Most likely be a tool kit similar to this 👍😀 so stay tuned

[@StrikerGaming9080]

Thank you man I will be stayed tune with you

[@StrikerGaming9080]

Oh by any chance pick me in the PS4 giveaway cus I'm poor srsly pls pick me or the tool box thank you I will be tuned

[@iamfuckingyourwaifuandther2743]

Does this still cost £30?

[@ShadowFoam]

Think so, we may have to do an updated one sometime 🤔