How well does wheelie (LIF) Control work on the 2024 MT-09SP?

[@crawlersncustoms]

Much better than your other video. Nice work. This bike is on my short list now. A bit hard to come by in Georgia at the moment. Maybe next season.

[@SantiWax]

Much better vid than the first one ✌️ keep it up mate

[@theWBT]

Need to see what lif does to clutch ups, please.

[@INFAMAS]

Okay, stay tuned

[@ReezMotovlog]

@@INFAMAS i owned a 2021 mt09 and i clutch up on lif 1 and i think it doesn't work because I can pretty much hit balance point and rear brakes is a must. And my friend looped his, and he is also clutching up at lif 1

[@Ukmongoose3]

Tuono APRC is the same, nearly looped with WC1 eeeek

[@Love4boost]

Same here as a 2021 owner. If you go full throttle when clutching up the traction control kicks in and either brings it down or sits about midway to balance point. If you let off a little so the traction control doesn’t interfere you can bring it to balance point. I think they cleaned up how it cuts in for 2024 models. I heard it doesn’t interfere as much when clutching up making it easier to learn. My guess is they made it closer to how it works on the R1

[@voyteq1]

I had 2022 model and I did only power wheelies on level 1. Almost balance point with quickly twist to almost full throttle and it will sit there until run out of revs or being quickshifted to 2 & 3 gear ( little bit over 100mph tested by me ) You need to apply full throlle and hold it so it will lift higher after a few secs. Try it. ☆ Just don't do clutch up wheelie if you don't wanna loop it

[@Laurencjusz01]

The 2nd video is much better. Thanks, man! But in the previous one, in modes 2 and 3, the front wheel lifted higher. Did you use full throttle? ❤

[@INFAMAS]

I used extra throttle each time to get the wheel to lift, this time I used the same amount each time :) It was about half to 2/3 throttle this time.

[@Laurencjusz01]

@@INFAMAS Thats fair. Thanks!🙏

[@jacopoamoroso1593]

i'm 18yo and i worked very hard to get a bike like this. I ordered it in its 35kw version on the 2nd of july but it'll be deliver in the first half of november (i'm in rome btw).. i already got my exhaust and everything to remapp and unlawfully get it over full power😗but i'm courious on how to open the tank and the saddle on this bike with that keyless thing, i couldn't find any information whatsoever. thank you and keep it up bro💪

[@INFAMAS]

I might make a video about this, seems to be a hot question. To open the take you just have to turn the bike off and have the key near by and it'll open. As for the rear seat, there is a key inside the key fob you can pull out to open it :)

[@Knusperkeks44]

Which exhaust did you buy ?

[@cardoor9600]

Currently in the break in period on my 2024 09 (non sp). Absolutely loving it. How many miles/kilometers do you have on yours?

[@INFAMAS]

700km on mine

[@aluisious]

Your break in period should be a weekend. Go hit every twisty road you can get to in 8 hours, then go back.

[@idontevencarei]

So i just bought the same bike. Ive been trying to get the wheel off the ground with a power wheelie. I had all electronics off and power mode at one and when i blip the throttle nothing happens

[@matyc13]

Man!! I love the bar end mirrors you are running and was looking for an underslung option that won't hit the tank. Would you mind sharing? Also loved the video very good info!!

[@blbills]

Curious to get your thoughts on the adjustable ohlins preload on the back for taking passengers. I haven't seen anyone talk about that yet...

[@ChrisSauer-oe5ve]

Now do a standing start, like in a drag race to see how it acts. Most throttle possible. Please

[@quiros3764]

mirrors?

[@ΚωνσταντίνοςΠ-η6ι]

Hello, why do u have all modes off for wheelis and not only the lif?

[@saffylooloo]

Great vid dude, better than the 1st. When you have it in the higher lift control, ie 2/3, does it reduce the amount of throttle or just give you the same all the time but stop the lift ? Cheers buddy

[@INFAMAS]

Apparently it reduces the throttle a bit to keep the wheel down. Though it doesn't feel like it does

[@saffylooloo]

@@INFAMAS So the higher the lift control the more it effects the throttle. This will also effect the amount of drive then, say on a track day. Cheers mate.

[@modestosmodestou482]

Can you please tell me where you got the mirrors? I ordered my 09 SP about a month ago and i can’t wait☺️

[@celzolsen8988]

Nice video! Does traction control also affect wheelies?

[@INFAMAS]

Yep, but it'll just slam the wheel down randomly, it won't slowly reduce the throttle like LIF control does

[@johnnyn287]

are you gonna do a how-to-wheelie video? I want to learn and try it out but too afraid/scared that I might mess it up by tipping over or crash my precious mt09. just need to try get rid of that fine line of fear when the tyre lifts up and be comfortable with it if you get what I mean.

[@INFAMAS]

How to wheelie video coming tomorrow. Early release for channel members 🤟🏻

[@johnnyn287]

@@INFAMAS cool! looking forward to watch that

[@giorgiokammello]

Thanks for the video. One question. With the anti-wheelie control set to 1, is it possible to overturn by giving a big acceleration or using the clutch? Thanks if you answer me or to whoever can answer me. Greetings from Italy

[@INFAMAS]

It'll still wheelie significantly in mode 1. And some people can clutch up in mode 1. But it's no where near as easy as having it off

[@giorgiokammello]

@INFAMAS thanks for the answer. the question is different though. I was wondering if for someone who doesn't know how to wheelie using the rear brake, if in mode 1 there was a risk of tipping over or if the bike cuts power before this moment. Thanks

[@INFAMAS]

@giorgiokammello You can still loop over with LIF on. But it is harder to loop.

[@giorgiokammello]

@@INFAMAS ok. Thanks for your help!

[@user-nc2fb6oc6s]

If you go full throttle from a speed above 50 km/h 1sr gear, you can wheelie even more. With lift control on, you won’t flip, but still, be careful-you'll need more distance for this. I’m riding a 3-Gen MT-09 SP.

[@INFAMAS]

Yep, LIF doesn't promise no looping though. Seen these things loop with LIF control on, so still be careful!

[@raffaelloariu324]

Yeah continue this and it sure as hell will flip.

[@user-nc2fb6oc6s]

@@raffaelloariu324 I feel that it's impossible to flip over without using the clutch. I've done power wheelies so many times, and I've never experienced any instability.

[@raffaelloariu324]

@@user-nc2fb6oc6s iff only i could sent you a nice little picture off my bike at this moment i reasure you all safety was on because i changed the exhaist without flash so its in safety mode and i cannot change that because of mil light

[@brunopereira3300]

Does LIF works with clutchups?!?!? Or just with power wheelies?!

[@INFAMAS]

Just uploaded a short answering this question!

[@pankral450]

So 4:44 ? Power mode 2 but everything off? TCS, SC, LIFT off?

[@INFAMAS]

Yes

[@BrandonPrado1]

Mode 2-3 also lifts the wheel up but you weren’t able to because you were scared

[@INFAMAS]

Scared 😂 Bro I said I was giving it the same amount of throttle each time. If I wanted it to come up I would just give it more, but then it would be an inconsistent test. The first test was the control, and you see how the bike reacts from there.

[@BrandonPrado1]

@@INFAMAS you are supposedly showing us how the lif control works and that clearly is not how it works. That’s how you want it to work. Next time give it full throttle and show the people how it actually works and how much it will go up on each control because that’s how it’s made to be. If I’m scared of wheelies I’ll put it on 3 knowing I can accidentally give it full throttle and it won’t make me flip

[@aluisious]

@@BrandonPrado1 He's good at cranking out videos...not great at figuring out why he's making them.

[@INFAMAS]

People have crashed these bikes because they have LIF control on and think they can full throttle it... So no, I won't be full throttling it with LIF control on, at least not on 1. It's not a magic "anyone can balance point" feature, it's a "keep the wheel on the ground so you can accelerate harder" feature.

[@danielxerri-cs7mr]

Hi man can you tell me how to turn lift control off pls ? Nice vid bdw .

[@jhp4012]

Is the SP worth it. I’m on the fence to get it or the regular

[@raycampbell9509]

I got SP 2024 go for it and it’s worth every penny brembo brakes keyless start and more.

[@INFAMAS]

I have a video on if it's worth it! Check it out :)

[@aluisious]

It's worth it. In a couple years when you start thinking about upgrading parts of the bike, you'll wish you had bought the Brembos and Ohlins at the start. Also it looks better.

[@jhp4012]

@@aluisious yes I was thinking about the upgrades. Well worth it. And the color of the SP so much sexxxxxier hahaha

[@johnnyn287]

which mode are you riding in? custom? street? or sport ? I need to get start learn how to wheelie. but it looks very easy I must admit. have an mt09 2024 myself non SP

[@INFAMAS]

For proper clutch ups I'm in street mode, but with everything turned off.

[@johnnyn287]

@@INFAMAS but in the video? Also streetmode?

[@johnnyn287]

Would be Nice to see from diffrent angles or 1st person view on "how-to-wheelie" video from you 😁

[@KC-ps4st]

U in Oz where abouts?

[@INFAMAS]

Hobart

[@soulstripper]

What is LIF? Is it standard on the 24 MT09?

[@INFAMAS]

Wheelie control. And yes :)

[@genreaper]

I could get mine up in 5th no problems no clutch. If you got sk8lls. Tuned bike tho. 09 is a beast and fun bike but earlier models had crap suspension.

[@Snicker433]

I miss Hobart...

[@Razzer0693]

i want to buy this but i cant because yamaha doesnt sell higher capacity (more than 300 cc) bikes in goa india :(

[@stumo114]

Have you ridden a MT10 (SP) , if so, what did you think?

[@JimmySnakes]

Come on bro what’s the scoop on the bar-end setup 👀 You get those adapters on the end or did you pull the weights entirely?

[@INFAMAS]

At the moment they weights are off entirely. Replaced by CRG arrow mirror bar ends

[@JimmySnakes]

@@INFAMAS gotcha ty. Yeah if you ever miss the weights you can grab an adapter piece off RhinoMoto, I’m using some Motogadget mirrors but those you have look clean 👍🏼

[@voyteq1]

You should have add way more throttle! Quickly full throttle and wheel will come up waay higher! I know as I had this bike. Trust me. No clutch up just power wheelies 😎👍🏻

[@insyde1266]

Why is the 2021 (3gen) model 4kg lighter than the 2024? Is the chassis still as fragile as in 2021? Aesthetically it doesn't seem changed.. Apart from the split saddle, it has not undergone any particular changes.. there are no more superstructures.. the 4kg cannot be explained..

[@INFAMAS]

More electronics and sensors in the 24 would be my first bet. I believe they changed the frame as well.

[@aluisious]

You're right, the 4kg can't be explained. It's a conspiracy between the Lizard People, the Democrats, and the New England Patriots. Or maybe you don't know what the hell you're talking about. They changed the geometry, the suspension, the electronics...

[@insyde1266]

Okay, tcs/lift control are disinserible in moviment? Or need stop for disactivate

[@jophetseanamorte5093]

Zero LF super quick..

[@modestosmodestou482]

Lol he replies to every comment expect of mine😂Gatekeeping the mirror as if it’s something sacred. I used to like you but dude i will unsubscribe. I don’t appreciate people like you. Take care!

[@INFAMAS]

Bro chill, I didn't even see your comment. I reply to them if they pop up on my phone while I'm using it. The mirrors are simply ebay knockoffs of CRG arrow mirrors 😂 They are like $40, but they look cool so 🤷🏻‍♂️

[@modestosmodestou482]

Hahahahahaha i thought you were gatekeeping😂Sorry dude and thanks for the reply🫡🫡

[@raffaelloariu324]

Wothout watching this, i can tell you; IT DOESNT WORK GOOD, at some point it just says fck u, i just flipped it last week.....

[@INFAMAS]

It does work, very well. Just don't rely on it to stop you from looping, that's not what it's for.

[@rjunior09]

You did’t. Thanks! 😅