How Will I Remove This Camshaft Bearing?

How Will I Remove This Camshaft Bearing?
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Kohler, Tecumseh, Dolmar, Makita, Poulan, Ariens, Powermore, Briggs and Stratton, Champion, Murray, John Deere, Craftsman, MTD, AYP, etc.
Check out my new DIY channel here @MadeInMyGarage
If you'd like to become a patron to help this channel grow and get involved with future video ideas, here is the link:
/ donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
I have easy to follow and thorough step by step tutorials "do it yourself" (DIY) videos to help you with your broken lawn and garden equipment including snowblowers and zero turn mowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed whacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, zero turn mower, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on KZbin and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on KZbin to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
Tengo tutoriales paso a paso fáciles de seguir y completos, videos de "hágalo usted mismo" (DIY) para ayudarlo con su equipo de jardín y césped roto, incluidos quitanieves y cortadoras de giro cero.
Hago todo lo posible para enseñarle cómo diagnosticar fácilmente problemas de la manera más rápida, rápida y eficiente con reparaciones reales más allá de simplemente reemplazar una bujía. Estos consejos son tanto para el dueño de la casa como para el dueño de la tienda.
Ya sea un motor manual de dos tiempos y dos ciclos como una motosierra, un desmalezador, un desmalezador, una cortadora de hilo, una cortadora de césped, una cortadora de hilo, una cortadora de setos, una podadora, una desbrozadora, un soplador de hojas o unidades de cuatro tiempos y cuatro ciclos como una cortadora de césped, una cortadora de leña, un tractor cortacésped, una cortadora de césped de giro cero, una sopladora de nieve, una lavadora a presión, un generador o una cortadora de césped que necesita que se instalen o reemplacen piezas, soy su persona indicada.
He sido mecánico de motores pequeños durante muchas décadas y también dirijo mi propio taller de reparación, por lo que mis videos están repletos de consejos y trucos que he aprendido y quiero compartir con ustedes. También encontrará muchas revisiones de herramientas y productos de las mejores marcas en mi canal.
#donyboy73 #diy #snowblower

[@donyboy73]

🔻WATCH NEXT🔻 DIY HOMEMADE Bearing Puller - No Lathe Required ➡kzbin.info/www/bejne/momXd2Opnqh4kJo

[@MostlyBuilds]

Very cool! Love watching tools being made like this

[@JonnyFlash80]

This is amazing. I love watching people make their own tools to do very specific tasks. There's potential to save a lot of money with this mindset. I can just imagine how much this specialty off the shelf tool would cost.

[@themowerman]

Great video mate if you don't have a blind bearing puller handy... By the time you order one and wait for it to show up you can just make one.. good information mate

[@100vg]

You know all the tricks. Great procedure for making a blind hole bearing puller! 👍👍 Another wonderful video, Don. Thanks

[@MrRunner]

Dony, neat idea. Two things- 1. You are using a mild steel bolt. MS cannot be hardened, you have to use Medium Carbon Steel (aka Tool Steel) . 2 I use an alternate method. Pack the whole bearing with grease. Find/make a shaft to fit the i/d. Place it over the hole and whack it with a hammer. The bearing usually pops out due to hydraulic pressure. Hope this helps. Most clutch flywheel bearings are removed like this. Hope this helps. Happy NY

[@ChuckD59]

Not be a negativer, but I'm not seeing how that could work unless you had a bearing seal on the underside to keep the grease from spraying up between the balls. This one did not.

[@MrRunner]

You raise a good point. However, I find with small bearings like this, the sudden application of hydraulic pressure, via the packed grease, is sufficient to move the bearing most of the time

[@user-bs3ww1un7b]

Fantastic information. Thanks for sharing your wealth of knowledge and tricks. Love the John Deere paint job.

[@adnacraigo6590]

Nice. Have you ever tried filling the hole and space under the bearing with grease and placing a wooden dowel or solid metal rod almost the same diameter as the center hole and striking it with a hammer to hydraulically push out the bearing? I have seen that work.

[@ForfeMac]

Soggy bread works too

[@donyboy73]

I will try it next time!

[@ForfeMac]

@@donyboy73 It's important to find a rod that fits in the hole as tightly as possible otherwise the grease will just squirt through the gap between rod and bearing.

[@Paul1958R]

I was going to suggest the same thing. Works great on pilot bearings in the end of auto engine crankshafts.

[@carjacker0]

wet paper towel work good .

[@bobmcl2406]

Wow, that is some excellent "seat of the pants" tool fabrication. Thanks for taking the time to make this video.

[@jarikinnunen1718]

The simpliest way is hammer, trill bit end, and wet paper in hole. Fit bit make hydraulic force, which push bearing out. Heating help.

[@FreedomRock44]

End result a JD Puller!!!!!!! hahaha. You amaze me DONY!!!!! That is awesome!!!!!!

[@user-qs3vz7rc6i]

You might want to heat up the area around the bearing and smack the block with a rawhide or plastic mallet. Many times the bearing will come right out.

[@gordmcdonald2807]

Awesome job Don. That is pretty invetiver. If the women don't find you handsome, they will find you handy.

[@deanrhodenizer938]

Nice. An improvised sliding hammer puller.

[@martindesmarais7158]

Always easy when your name's Donny ! Haaa if I could have your handy abilities, I could do lot more 😊 Sheers from Québec !!!

[@1953emo]

Amazing job Dony! Let me take my hat off to you.

[@stevesfascinations1516]

Amazing what a person can do with initiative and a few hand tools! Great idea and excellent filming, thanks Don!

[@mattyb7736]

Put case in oven heat till water sizzles when dropped on it (100C), remove from oven, rap case on bit of 4 x2 and bearing will fall out. To install, new bearing in freezer for 24 hrs, heat case as above, bearing will fall into place. This method has been used for years on Japanese and British motorbikes

[@robertmailhos8159]

That is a great idea to heat up the metal then dip it in the oil to harden it it would be nice if a tool manufacturer would work with you on making this tool to remove those types of bearings

[@canoetipper019]

On some of those bearings on heavy equiptment we would freeze the bearing so it would slide right into its 'hole'...somewhat bigger bearings mind you, but same concept. Nice home build too...thanks for sharing.

[@RussellBooth1977]

That would come in handy when changing the clutch in my car to remove the pilot bearing from the crankshaft although I might just use the plasticine trick that we used to remove needle bearings from blind holes in the old Kango (now DeWalt) jackhammers when we were repairing power tools & when I was an apprentice, some people even use bread. I normally would heat the alloy housing up with a heat gun or a propane torch then tap the housing onto a block of wood or a wooden bench with the bearing facing downwards so it just falls out of the housing !

[@MrRunner]

Bread works. Fill it with grease and fit a shaft over the i/d. Whack it with a hammer and it'll pop out (hydraulically) Hope this helps

[@chrisallen2005]

I loaned my Snap-on bearing puller to a friend of a friend to pull his crankshaft pulley that he had spent hours messing with. Did not even offer me a six pack of beer. Now I know his phone number and call display is my friend.

[@MrRunner]

Totally understand. I don't lend tools or books for that very reason. I have an extensive inventory of tools and equipment, built up over 50+ years and used to be subjected to people banging on my door wanting to borrow stuff. I was like a tool crib. Just said no, bring it over and I'll fix it for you. They went away in the end.

[@californigirl]

I heated the area, then tapped BEHIND the bearing with a rubber mallet. Came out. Performed on 1965 land Rover transmission

[@donyboy73]

Thanks for the tip!

[@julianreid8179]

a pilot beringp[uller will work as well also bushings can be re,moved thois way but donys way is more clever/...

[@upsidedowndog1256]

I have used commerial ones but I like the simplicity of yours better!

[@cornbinder]

You are very good at Fabricating

[@Banditt42]

Home made tools are so satisfying when they work.

[@BearE9090]

Great idea, especially hardened and quenched the end of the bolts. I can do everything but the welding. Good thing my buddy just got a mig to help me out if I come across this situation. Well done.

[@danobrien5070]

As always another awesome video mate keep up the great work

[@tomfillmore9710]

Very smart great idea thanks for sharing have a great weekend

[@markwarren9123]

Very slick!

[@brucemitchell5637]

Great tip Donny!

[@Tommyr]

Genius! Happy new year Don!

[@jaygee999]

Don tu es un magicien mécanique ! -- Merci

[@donyboy73]

Merci mon ami!

[@kenk3102]

...WOW Don.....great job!.....you must have been a machinist in your former life... 🙂

[@donyboy73]

I wish!

[@kencurtis228]

TY for Sharing

[@gatorgotme]

Fantastic Dony!

[@wf8933]

Great idea, nicely done

[@barrypettit3668]

Awesome video Don. Thanks

[@Davidjb37721]

Thanks for your help

[@jamesdepaul3410]

Excellent!!!

[@Zombeegun]

Nice work and as always, very informative!

[@beanolatte2682]

Nice homemade tool dony!!

[@RaleysSmallEngines]

Great job Don! Thanks for sharing.

[@TOWNCARBUBBA87]

very informative. thanks brother 👍

[@gpcivil8807]

Great show dude!

[@mrclaus859]

Thanks Dony

[@brucedale4465]

Great idea Donny!

[@randi740]

WOW Dony great job!

[@thinkingimpaired5663]

Great question followed by Great advice.

[@billsmith1770]

well done , thanks .

[@nebiertugrul5095]

Nice job 👍🏼

[@Patrick4959]

a lovely tool creation for sure and it looks like a good top tool technique for sure Donny mate and cheers from Australia 🐨🐑🦘🌴🇦🇺 or the land down under to your area in Canada 🇨🇦 and i bet it,s snowing over there for sure by now.🌨

[@larryleonard3922]

Thanks for sharing Dony! 😁👍

[@famasmaster2000]

Very ingenious Don, great job

[@michaelj38]

That was really good! Thanks

[@thomasphilhower1400]

Thank you for the great idea

[@alainleblanc4031]

You are a genius Don, merci !

[@Francisco-sx7th]

very interesting tip, thanks!

[@alankelley2676]

Nicely done Dony

[@kholtz6664]

Thanks for sharing your knowledge!

[@45papadoc]

Excellent advice and skill demonstration.

[@brianmcconnell7988]

awesome good job !

[@anthonyguenther6008]

Thanks for the tech tip.

[@littlepaddy7444]

Good idea Don. Thanks.

[@goldentrowel1968]

Great wok as per usual.

[@johnsmith-sw7ii]

Very tricky Don.....Necessity is the Mother of invention! Good job!

[@liljoeii6091]

That's awesome idea thank you and thank you for the video

[@johnbelliveau4704]

Great video Don, I like the John Deere colors!! Happy New Year.

[@Pete.Ty1]

👍👍👍.Thank you

[@jetskidude78]

Great video. Im definitely adding this to my toolkit.

[@Tubeagrutis]

Love it!!!

[@hofnerbass]

Genius great job

[@tomandrene]

Pretty slick. Thanks for the video.

[@michaelotoole1807]

nice job!

[@thomascunningham9847]

Well done Sir!!

[@brianphilbrook5262]

Ok that was one slick trick.

[@petepaq-2831]

Great job. A pleasure to watch.

[@regsparkes6507]

That's another way to do it,.. well done!

[@guyin916]

i dig this method! thanks for showing us!

[@rightlanehog3151]

This is inspirational!!😁

[@Spencer1609751]

Just Wow!

[@ClipperzPM]

Talented. Nicely done

[@markelkins7622]

Wow I'm impressed

[@tonylander3512]

I just weld some rod with a slide directly to the bearing and tap it out that way, it works for me ...

[@tacocin]

Genius! Necessity is the mother of invention! Salute!

[@errolpoxleitner9586]

Good. Job

[@philliphall5198]

Very nice work and great tool

[@chuckuu9294]

Once again Big D. you come up with a simple solution to a problem. Thanks again.

[@Mechanicturfgear]

Very nice . Good little project for my shop 👏 I have the slide hammer just have to make a few less parts. Great video.

[@rutbuster1]

Pretty ingenious tool. Simple enough to make.

[@markreimers5396]

Very clever. Thank you very much for tip.

[@CraigArndt]

Awesome!

[@davebuchanan9761]

this is great!! i can even use this for replacing bike parts!

[@MikeD-ne6ie]

Thank you Dony! You know everything!

[@donyboy73]

not quite!

[@marklubecke4854]

Nice slide hammer action, very effective.

[@breannaoliver6316]

Wow!!! Donyboy73. Una idea fenomenal fantastica. Eres UN erudito.

[@donyboy73]

Gracias amigo!

[@hickorystx]

Ingenious!!!! Simoly amazing what you can do when you make your own mind up to not be defeated!!! Thank you for sharing your wisdom!!!!😃

[@tomme3913]

awesome

[@gardenfork]

Absolutely brilliant Don. Now that it’s yellow and green you can charge more for it. 😉

[@Jim-ie6uf]

That’s slick!