Hi .This video is about plumbing and installation new washing machine. I'm showing 2 methods of fitting the flex waste pipe under the kitchen sink and to the open pipe. Thank you for watching.
Пікірлер: 168
@robertap8467 Жыл бұрын
This is the only video where I found needed height of waste water hose. Thank you!
@carment.duplessis91253 жыл бұрын
Hi How2D2. Thank you so much for this tutorial. I recently lost my dad and moved into a new flat and had to connect my washing machine. He never taught me and I was worried I wouldn't manage and then I found your tutorial. You are a life saver.
@briancaffin6811 Жыл бұрын
Massive virtual hug. Same situation here and never got the change to learn from ym dad and KZbin has been a life saver too!
@waluyowaluyo136 Жыл бұрын
@@briancaffin6811 MMM Free R ini
@Mariamsadventure6 ай бұрын
Sorry for your loss 😢
@tameishajones92224 жыл бұрын
I just fitted my washing machine in and I’m SO PROUD, thanks to this short and sweet tutorial I’m a plumber LOOOOOL
@tameishajones92223 жыл бұрын
@@ShoaibAly6 thank you so much, head over to my channel for some videos! ❤️
@raissasef46203 жыл бұрын
و
@alirezanasir19313 жыл бұрын
Brilliant, I apprecite, straight forward to the point, not wasting people time. Cheers mate👍👍👍👌👌👌
@joylynch12964 жыл бұрын
This is the first time I have ever plumbed in my washing machine this video was SO useful for a complete novice - many thanks!!
@BigVVS Жыл бұрын
I love 2022 you can confidently do anything yourself with KZbin it’s brilliant
@hm87812 жыл бұрын
I have looked on so many videos to fix a problem and You show that there is a washer in the fitting that needs to be removed thank you thank you x
@marymcandrew76673 жыл бұрын
Thank you, I now understand why our washing machine waste pipe didn't stay attached! We need a hose pipe clamp. We just moved and it's a different set up here, the utility room got a bit wet today!
@shashankk41003 жыл бұрын
Thanks a lot, fixed my washing machine outlet seeing this video. Felt like experienced plumber after this :D
@justincarr9623 жыл бұрын
Cheers for the video; we'd plumbed ours in - but it wouldn't drain away - watched your video and realised there was a blanking cap inside the sink waste connector! Doh! you saved us a lot of hassle.
@TheHutch0004 жыл бұрын
THANK YOU VERY MUCH. I have now managed to plumb my washing machine in all working fine . Cheers mate
@magic1014853 жыл бұрын
Absolutely brilliant video, thank you so much!
@sophiebrandon254 жыл бұрын
Thank you just did step by step what u did and now my new washing machine is fully installed I am so happy 🙏🙏🙏🙏
@voucherqueen3 жыл бұрын
Brilliant. Worked a treat after following your instructions
@EryxUK2 жыл бұрын
You are a star. Just got that very same washing machine this morning. Thank you!!
@journaloftraits56815 жыл бұрын
THANK YOU , this video was excellent, made me feel like a pro ! Seriously this was so helpful and you explained everything perfectly.
@ehsankiyani12125 жыл бұрын
J,hhsjaoj
@milliedevine88133 жыл бұрын
Great video straight forward and to the point 👌
@MrF1rebolt5 жыл бұрын
Best video i have seen so far for washing machine installation! Top job my man 👌🏼👍🏼
@annielingray1113 жыл бұрын
Very helpful - clear instructions. Today, spilled water over my floor trying to do this. Much clearer now. Thanks !
@simonmogos444 жыл бұрын
Incredible video you always make my day happier thanks a lot
@davidbetts29802 жыл бұрын
Just what I needed thanks buddy, wanted to double check on the plumbing.
@msithara11 ай бұрын
Thanks. This one help me to get the drainage issue fixed on my brand new washing machine. It was connected under the sink and there was a cap to cover the sink pipe which i removed before. But it wasn't draining. After watching the video i found there was another rubber seal inside (as shown in 5:00). Unlike some of the others commented, this wasn't a one way valve but a rubber bush which completely block the line. After removing it, draining worked just fine.
@lunaseto58453 жыл бұрын
Thanks for the vid really helped me fitting my washing machine
@kuzukuzu2615 Жыл бұрын
Brilliant video, taught me all I neede. Thank you.
@noneofyourbusiness8180 Жыл бұрын
This was a good video, had to watch so many hit this one was explained well and instructions are easy. Thanks
@Pvrpleheart2574 жыл бұрын
This was very helpful 👏🏾
@rawleelp3 жыл бұрын
Thank you so much did it myself. Now to find out how to make the wastepipe longer...
@leechien64914 жыл бұрын
Thanks for this video Very helpful Good luck to you and your family Thanks again
@crccarino4 жыл бұрын
Thank you! You've explained it better than the sales guy LOL
@ladygold52662 жыл бұрын
Well explained and easily understood. Thanks so much.👏👏👏😃
@abdikariinahmed7293 жыл бұрын
Thank you for your explaining to us💯👍
@carolinehamilton45753 жыл бұрын
Best video to watch re installing washing machine so straight forward Thankyou
@vickirutherford19922 жыл бұрын
So glad you made this video!!!! I can not physically carry laundry down a flight of stairs (my apt on 2nd floor) or back up it. I use a cane to help me walk so it’s IMPOSSIBLE!! This was such a life changer for me. And so easy to do. I’m 66 and it was easy breezy… just check for leaks. ..and your done. Yeah 😃
@terrymcewan76192 жыл бұрын
Excellent instructions. Thank you
@aam31513 жыл бұрын
What an excellent step by step DIY
@danmahmudu5 жыл бұрын
Quite useful, thanks.
@siimplyyou44612 жыл бұрын
Very useful thank you. Solved my machine issue
@the701squad14 жыл бұрын
great video, best diy on youtube
@MsVivian998 ай бұрын
Thankyou for this video!
@mashcino2 жыл бұрын
Thank you for this!! Really helpful video
@ClaimOfRightMuso3 жыл бұрын
Jeez.. Brand new washing machine, plumbed it in easy-peazy, fired-up a cycle - stopped dead when it shoulda emptied, tried everything, EVERYTHING - but the beast simply refused to go any further... Then I checked this video at 4:14.. oops - bloody plug still in spigot! Thankfully - and very flabbergasted - we continued to watch until 5:00 - a washer! Flabbergasted again!! Thank you, mate, if not for you I'd have to dig shallow grave for my missus..
@wallace93207 ай бұрын
Thanks mate this method still works
@handerson2133 жыл бұрын
Thank you! Awesome 👍
@darrenmoore22784 жыл бұрын
Thank you really helped
@M.L.E904 жыл бұрын
The transition plugs blasted my hands
@scottalexander42512 жыл бұрын
Appreciate the video thank you.
@1nkemobi3 жыл бұрын
Thanks for sharing, I appreciate
@pumezankenkana27194 жыл бұрын
Thank you! I nearly payed R500 to a plummer for installation.
@usesekira3 жыл бұрын
Thank you.. very helpful and brief
@264144253 Жыл бұрын
Excellent well filmed video ❤
@user-sw9kh3yw9g Жыл бұрын
🌹❤very good luck
@amyxusa5 жыл бұрын
love the connection/connectors, so small and cute, not bulky like those in my home :(
@jlai38614 жыл бұрын
Don't do it that way, you will have sink full of water when wash machine pump water out.
@harimadhavan1712 Жыл бұрын
Bookmark 3:29 Thanks for this
@jenbac.s18584 жыл бұрын
Thx. Excellent!
@kdpekdidf5 жыл бұрын
I'm fighting with the landlord to get him to put a new washing machine in before I move in...lol. Many thanks. Great video!
@sacisco17806 жыл бұрын
cool video but i have some problems with the pipe outlet which has a cap i don´t know what tool I need to open it
@newtondsouza6091 Жыл бұрын
very helpful
@alexkapinga20245 жыл бұрын
Nice video. Just one thing, at 5:00 you tell us to remove the middle bit of the rubber "washer" before replacing it. I don't think that is necessary. The middle bit of the rubber seal act's as a one-way flap valve which allowes waste water to travel in one direction only. (Into the drain) The rubber flap then closes to prevent waste water flowing back down the grey discharge hose towards the appliance. If it was supposed to be removed, why would it be there in the first place 😉. I have exactly the same sink trap and did not remove the middle of the rubber seal/valve. It works fine and drains nicely 😎.
@JamesofJesus4 жыл бұрын
Exactly. The engineer of the sink drain made it for that specific reason. Regular diy'ers should be more proud of the engineers who build these little add ons we hardly notice.
@msithara11 ай бұрын
May be not the case always. I found out that it was rubber bush which completely block the line (its a new house where plumbing is just done) not a one way valve. After removing it, the draining worked just fine.
@crystalconciousnessofnewea66737 ай бұрын
Thank you so much
@dechristinegahizi72723 жыл бұрын
Thank you very much .
@abidachaudhary8744 жыл бұрын
Excellent .
@cinepost3 жыл бұрын
With the use of an Oatey laundry box, If I were to lower the box so the top of the drain pipe is 28”, could I put the p-trap below the floor? I have a crawl space below the floor. Front load washer.
@jessiebartels69112 жыл бұрын
Thank you so much. You're a genius.
@AbsolutEdd6 жыл бұрын
Thanks for the vid! In the first method, what do you call that style of under sink trap with the washing machine waste inlet? I'm trying to find a shop that sells them.
@AbsolutEdd6 жыл бұрын
No worries I found one. For anyone else looking, search for "Universal Space Saver Plumbing Kit"
@allenm76 жыл бұрын
AbsolutEdd thanks
@01arron4 жыл бұрын
The middle of the rubber seal is meant to be left in so that water can travel out of the machine but not allowed to flow back into the machine from the sink but break the small tabs and just leave the one Big tab so it can let the machine water push against it
@msithara11 ай бұрын
May be not the case always. I found out that it was rubber bush which completely block the line (its a new house where plumbing is just done). After removing it, the draining worked just fine.
@richarddonaghue96510 ай бұрын
That middle bit of the washer acts as a non return valve. If you remove it then water can get into the washing machine or dishwasher when you empty the sink. This can be overcome if you point the small pipe upwards so that gravity won’t let water into the pipe. The sink drain acts as the anti-siphon in this case.
@juliekreckow45202 жыл бұрын
good instructions where it connect to the washer - mine is connecting at the bottom - does the hose come up high going to the drain tub? might help to see the back of the washer after all hooked up?
@Raptorel4 жыл бұрын
Hello, where do you find a "washing machine top" like at 3:00 ? I don't have that in my house and even if I did, I'd have nothing to connect it to.
@wolduharegewoin98023 жыл бұрын
Thank you very much
@milkygoodness81224 жыл бұрын
Are all the connections for the water supply universal in the UK?
@Techno-Charge3 жыл бұрын
Thanks 👍
@sahmedt94 жыл бұрын
Do you leave the water supply on?
@socialjusticewarrior23165 жыл бұрын
4:41 hacksaw blade so sharp
@writerNB5 жыл бұрын
its a good point. I would detach the whole spigot, take it to a vice or workbench, grip the spigot in place, then start (slowly) sawing using a new hacksaw blade, wearing grip gloves: better safe than sorry.
@jackula1234 жыл бұрын
good video
@tyronegaa3 жыл бұрын
In the first example of plumbing the waste is the U-clip not required because the trap of the sink will prevent smells? Where as if the waste is going in to a separate straight pipe then the U-clip is needed?
@rajeshsharma-nj2ze4 жыл бұрын
Your really talented. You need to make boiler installation video
@ipmtv32983 жыл бұрын
Helpfully
@jamescc20102 жыл бұрын
Do you think the new sink drain pipe can handle water pressure and won't damage and flood?
@peterrobertbowers76393 жыл бұрын
i bought one of those John guest push fit water 💦 💧 inlet washing machine taps....as apposed to the compression metal taps. i am supposed to be refitting my tiny kitchen out. But because I’m not a professional plumber; i don’t really see my kitchen being finished anytime soon this year. Wednesday am at 08:24H. 10th February 2021 U.K. 🇬🇧 Southampton.
@rengamz2 жыл бұрын
Hi there, how do you extend that washing machine hose to reach the water supply?
@rijings52494 жыл бұрын
What is the name of the sink drain + washing machine connector? Please tell the name of that u cut with hacxo blade?
@jlai38614 жыл бұрын
I'm searching for under counters wash machine plumbing as I ran into a problem that, by code it has to dump water in a 2" drain pipe, which eliminates the possibility of connected to lav drain. Or if I ran a dedicated drain pipe by code the bottom of P trap should be at least 6" off ground, and top of drain pipe should be at least 24" above P trap horizontal branch, these 2 plus P trap would be over 36 " above ground, so the laundry connection are all exposed above counter top. I want hide plumbing under counter but looks impossible, even on Bosch manual they have nice picture of washer dryer under counter and no connection above counter but in detail instruction it said drain pipe should be at least 36" above ground. I'm lost.
@Funnyshort473 жыл бұрын
Thanks 🙏 bro
@ParityCheck365 Жыл бұрын
What size was the metal clip or does the washing machine come with one?
@glosterboybirder6 жыл бұрын
The new washing machine site will be some distance from the sink. So, no waste connection there. But, the rear of the washing machine will be up against the 40mm waste pipe some distance away. I will need to connect via the second option shown. I fully understand the method of connecting the washing machine flexible waste pipe into a vertical waste pipe. But, how do you connect this vertical waste pipe to an existing 40mm waste pipe? Or is there another connection option? Thanks.
@writerNB5 жыл бұрын
you need to break it down, Mike. The vertical waste pipe is a "run away" pipe (usually installed by a plumber) thats connected to your MAIN waste pipe that carries waste water out into the sewer (external drain). Your washing machine needs to be VERY close to this vertical "run away" pipe, when you fit washing machine waste water pipe (the GREY one attached to the machine) - shown in Method 2 in vid above. But heres the kicker- not all homes are fitted with a vertical runaway waste water pipe. If you dont have this vertical 40mm waste pipe NEAR your machine, I would ask a qualified plumber to install one FIRST, NEAR where your machine will be operating- before you do anything else. Good luck.
@dbudhathoki92152 жыл бұрын
Does the black stopper things have a specefic name to them or is it just called stoppers under the kitcken sink? I think I need to buy one. I have exactly the same setup under my kitchen sink and the grey drain pipe does go in one of those outlet. I have 2 open outlet down there, i reckon one is definitely for the washing machine drain pipe but other one is just there with leaking water. So what's that black stopper called?
@lloyd67514 жыл бұрын
i like your plastering job, it looks very smooth LMAO
@nanahamilton11012 жыл бұрын
Thanks
@xbluewolfy17413 жыл бұрын
I have done loads of washing machines/Dishwashers and not gonna lie I learnt from this video about cutting the waste pipe down, I have always used a clip and never had issues. But I also noticed you done something wrong, the "washer" in the waste pipe is designed as a "Non-Return" so if your sink backs up all the dirty water does not go into your washing machine/Dishwasher, that is why it only opens one side.
@johnw2758 Жыл бұрын
Nice video although I would have just removed the blanking plug and left the thinner end on instead of hacksawing it off.........you never know.......just in case.........
@vrglcom Жыл бұрын
Thanks but the waste connector which is 40mm is too small to screw on my pipe. Do they make a 50mm waste pipe connector?
@justforyou3846 Жыл бұрын
What is that part with the "bits" coming out from the plastic pipe called?
@OnTheBall Жыл бұрын
The metal clip under the sink is called a Jubilee clip.
@rbaron813 жыл бұрын
What about the dryer vent?
@JamboRiffs2 жыл бұрын
Water supply right next to electrical outlet socket, super safe
@wheatley745 жыл бұрын
What size was the hose clip you put on?
@writerNB5 жыл бұрын
Clips are 13-19mm hose clips (you can get them from any respectable builders merchants for a few pounds, or dollars). the oldschool engineers used to call them "jubilee clips".
@kingbee44747 ай бұрын
Are the 2 methods "legal" in Canada? Are we really allowed to install the drain hose in the standing pipe in the 2nd method?
@charlieeff Жыл бұрын
Ya legend
@24YT073 жыл бұрын
I have my washing machine fitted the second way with the pipe inside the waste. But I have drain smell being blown out of it. What can I do it fix this problem?