Hoover Candy Tumble dryer drum not turning and belt ok faulty capacitor

[@sttutoob]

This video saved me buying a new machine! Thanks

[@How-to-repair]

Really glad the video helped you thank you very much for donating much appreciated

[@bespoke500]

These guy needs a medal for helping so many of us out 😀

[@ashleywhite9076]

7yrs on and still assisting in a repair. Just finished repairing my Hoover tumble drier. Almost brought a new one but after watching this video and £6 were all back and working. Gave it a good clean, replaced the belt as a precaution and off we go as new. Thankyou 👍🏻

[@melissarowe5334]

Thanks to this video I diagnosed the problem with my tumble dryer and managed to dismantle and repair it myself at 31 weeks pregnant! Was a little more fiddly being a condenser dryer but majority of the instructions were the same. Just saved me a whole lot of money thankyou!! It almost went in the skip 😳

[@NegomiKeno]

I am doing this repair and also have a condenser dryer so was hopeful it's mostly the same instruction, from your comment I am even more hopeful 😊

[@hopgood007]

I had the same issue Melissa but like you managed to fathom it out.

[@nelftm]

Wow! Well done!! I gave up trying to get the bottom plastics off my condenser - and I'm going to just cut a hole on the side to access the area when the replacement comes!

[@SassVideo]

Unquestionably the BEST instructional video I have ever watched. I bought the capacitor from you and your clear, concise yet detailed instruction made the daunting task of replacing the capacitor possible. Thanks to you I can now add 'major appliance repair' to my completed bucket list. Much love from Israel . . . THANK YOU SOOOOO MUCH!!!

[@andywood233]

Thanks to this video I found the cause of my tumble dryer startup problems and I followed the excellent step by step instructions to replace the capacitor which I bought from the how-to-repair eBay store (only £7). Granted it took me a good 4+ hours to do (as I'm a complete novice at white good repairs!) but it did the job at a low cost so I'm happier than the proverbial Larry! Am very grateful to this chap for putting this video up, thank you

[@muddsyman]

I had this problem with my hoover tumble dryer, it would sometimes start ok but when it stopped to reverse I’d just get the electrical humming noise and the drum wouldn’t turn, watched this video which is exactly what mine was doing , ordered a new capacitor online fitted it and it’s like a new machine! Working better than ever! Great work guys very informative videos

[@thescienceofwellbeinguk]

You've saved us £650 on a new dryer. Thank you so very much ❤

[@How-to-repair]

Huge thanks for your support mate. I will continue to invest the donations that I receive predominantly into the new video technology that I'm learning with tracking cameras and better audio to make it easier for everyone to understand.

[@dagored4077]

Many thanks for this tutorial. I was told by a tradesman that I'd need a new PCB for my dryer and he quoted silly money for parts and labour. Then I did a search and this was the very first video I came to. 18 minutes later I felt I could fix it myself. An hour later I had ordered a capacitor and 24 hours after that I had the dryer up and running again. Total cost? A whole £14.95 and that included courier delivery! I saved a massive £170.00 off the quoted price. I found the tutorial very easy to follow but I managed to get my hands in the gap and change the capacitor without removing the drum and belt, a tight fit but saved a bit of time and effort.

[@Matty-wv6hd]

Spot on. Simple, straight forward instructions, no messing about. 👍

[@kellyl496]

Thank you for creating this. My dad and I replaced the capacitor in my parents machine with your guidance. We had to access it behind the fan which was awkward bit we did it. The trickiest part was removing the cover of the fan and then replacing it but after some choice words and manipulating we managed it. A huge thank you to all that helped create this video 🙌

[@jamesboydjones20]

Fantastic! Diagnosed the problem with our Candy 9kg Tumble Dryer - thanks to this video! Ordered the part from your website earlier in the week. Fitted it today and now it’s running better than ever! Thank you!

[@chriswatson530]

Brilliant video. Thank you. Just saved me £140 + . £7 for capacitor and 1 hour of my time. A few swear words but got there in the end 😁😁😁

[@w_doubleo_ster3441]

Thank you! Fixed my dryer in less than an hour. Spent more time panicing about electocuting myself on the capacitor than in did to safely change it (no charge in it), put a new belt on at the same time so should be good for a few more years. Saved a call out fee and earned myself some blue points. Another job done! My wife was already eyeing a new dryer online but that money is now safe as well

[@Paul-iv9en]

Echoing a lot of the comments above, your videos have just saved me a fortune. Was quoted £145 to fix it, and following these videos I was able to do it for £8.99. Couldn't be more chuffed. Thank you!

[@petertoovey118]

This works a treat. Like others have commented it has saved a fortune and a lot more hassle trying to chase a warranty repair. Thank you so much.

[@How-to-repair]

Iam Glad we could help you.if you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@KefaloniaChris]

Brilliant! Thanks so much for this excellent guide. Not my exact model, but your disassembly guide just saved me over €600 for a new dryer.

[@alanlewis6161]

Thanks for this, we have a grand vita with this problem. You've saved me buying the motor.

[@How-to-repair]

Glad I could help and I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.

[@vinnyreid5442]

Excellent video and has saved me from buying a new machine twice for the sake of a €15 part! My dryer 1st went last year and i found this video and gave the drum a push and sure enough it went flying. 9 months later power was on and the buzzing sound but did not kick into life when i pushed it. Was thinking it finally gave up the ghost but thought id change the capacitor. BOOM fired back up. Great detailed instructions top video!

[@hopgood007]

Excellent tutorial as usual from how-to-repair. My issue was with my Hoover Condenser Dryer. I made the school-boy error of replacing the PCB first (based on another YT video) before discovering this one. How-To-Repair will now be my go-to site for all domestic repairs. The Hoover condenser dryer takes several more steps but the principals are the same. The only addition is that you can't remove the bottom of the machine to get to the motor & capacitor so I removed the plastic trim and the fan before slipping the belt off the pulley wheel. This allows you enough space to get two arms down passed the drum to hold the old capacitor whilst undoing the holding nut. Ordered the h-t-r replacement capacitor from their e-bay store. Excellent price and arrived in two days!! Followed the refitting part of the video and the drier now works pefectly. I have a spare PCB if anyone needs one!!

[@minimad8793]

after watching this video, i decided to have a go at my candy condenser. sourced part from Hoover and it took me an hour and a half (mostly looking for tools in the shed). with a condenser machine, I had to prize apart the sides of the case to get at the capacitor and one of the spades on the capacitor was stuck so had to re thread another spade connector onto my cable. all cleaned out and put back together. works a treat now. thanks for the instructions off this video and with a bit of ingenuity, I have a working machine. here's to another 5 years of use.

[@2012superal]

Massive help saved me a fortune for my candy condenser, just popped the fan and cover off at the bottom to give my fat hands some more room!

[@How-to-repair]

Iam Glad we could help you Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@EaterOvSouls]

Thanks for this, although there was much more dismantling to do on my Hoover dxc9tcg-80 (condenser dryer), I had it done in a few hours. For anyone that's interested Hoover have a support page with a list of required capacitors for each dryers,, certainly saved me taking it apart first before just to check.

[@darrenevans1572]

I am struggling with my One Touch Tumble Dryer. I’ve got all the panels off bar the lower front panel (around the condenser). Amy tips on how you got yours off?

[@catabaticanabatic3800]

Thank you very much for your expertise. Saved me the price of a new dryer. Excellent tutorial.

[@colinahenderson87]

Really easy to follow and helpful video. Cost me £6.50 for a new capacitor and our dryer is back working now. The hardest part was getting the old capacitor off and the new one on.

[@MrTallatron]

Just fitted a capacitor to my machine, bought from yourselves on the back of watching this video, great work, thank you so much. 👍

[@How-to-repair]

I'm glad I could help you and I'm glad you bought the parts from us remember we do a live show every couple of weeks if you need assistance so make sure you subscribe to be notified

[@pj3ns3n_]

Excellent advice and instructions, easy to follow. Longest job was hoovering the fluff out. Many thanks.

[@leeson77]

I had this exact fault and watching this video helped me get it repaired ordered the capacitor from the site super quick delivery. Thank you very much

[@How-to-repair]

I'm glad we could help and I'm glad you're happy with the service please remember to subscribe to the channel as we have live technical help every couple of weeks

[@davidspencer2103]

worked and only lost one screw. Thanks. I am waiting for you video on fixing fusion reactors.

[@How-to-repair]

love it but not on my list of to do jobs but you will like my green power source www.how-to-repair.com/help/faqs/appliance-workshop-in-south-wales-now-totaly-off-grid-electric/ Thank you for leaving a comment this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

[@Lubna-ev9gs]

​@@How-to-repairI love your videos

[@chrishall2820]

Thanks for this, I've managed to get my tumble dryer working again. A bit more complicated than in the video as mine is the condenser version and there is very little room around the capacitor - but all going now.

[@How-to-repair]

Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇

[@44peters]

Thanks for this video after watching this I followed your instructions and now I have a working tumble dryer. Much appreciated 👍👍

[@joshhosseinof8425]

This is amazing - exactly the problem i have with my candy dryer and the full solution as well

[@Lump_Hammer73]

Thank you. Your step by step video is so easy to follow 👌 one step I didn't do was take the plastic Housing off that supports the drum front as I could access with it on...thanks again... I'm assuming that all of them scrap people are making easy money on fixing tumble dryers and washing machines that people are leaving out for them to collect

[@yvonneparry9488]

Thank you for this video! I managed to figure out the issue. The capacitor wasn’t working…. I took apart my tumble dryer, fixed the issue, put it back together and now it works 🙌 thank you .. what would have cost me a fortune ended up costing me just £9 for the capacitor

[@daddyfixit5188]

Well done thank you. You just fixed another 👍 £3.50 from Amazon I’m so happy 😀 so is my wife I got points. Thank you 👍👍👍👍

[@japeireland]

THANK YOU! We followed this step by step and repaired the dryer capacitor and it’s working great now. THANKS

[@How-to-repair]

Have a great xmas and new year Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel kzbin.info Remember to Shop with www.how-to-repair.com and it would help us by posting the video or website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.com/help/buy-paul-a-beer/ Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going. KZbin. kzbin.info Facebook. facebook.com/how.to.repair.appliances

[@MichelleHuseyin]

Thank you for this video! I was able to save myself the call out repair charge! 1hr of my time and a part which cost me £15! Dryer fixed 😏

[@How-to-repair]

Glad the video helped you and I saved you a few quid Wrinkly hands fix appliances, not algorithms! My videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @MichelleHuseyin please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@shaundunlop1164]

Excellent video. Mine was the condenser version, so a little bit different, but managed to replace capacitor as detailed here. Spare part was under a tenner. Thanks you! Saved me a major expense in the run-up to Christmas!

[@mixmastergeneral6430]

How did you get to the capacitor? Mine is a condenser as Well, all I can see is what looks like a gas canister at the bottom. Did you have to remove all the condensing unit at the bottom?

[@cjbdntdis]

Update, I replaced the capacitor today , as our hoover tumble dryer has a condenser it was easier to assess , I had a small issue removing thr casing as I had to remove the fan to put it back together again but changed the capacitor and now it is running good as new , will change the belt soon but will be fine for now . Thank you again for this it's been really really helpful!

[@Kyomiibrown]

Where was the capacitor located in your condensed dryer please?

[@MsWizzyj]

Wow, thank you so much, I believe our problem is the capacitor and will order one. Excellent video 🙌👍🏽

[@gavinmountjoy7459]

Thank you for this informative video easy to follow steps saved me buying new dryer for a few quid in parts which I normally wouldn't tackle but felt confident seeing the video and following instructions

[@will4may175]

Did this a while ago after watching this vid, thank you, ours is the Candy gcc591nb, the capacitor is in the same place only a real pain to get to with it being a condenser dryer, got a few scrapes on the arm trying to reach in to loosen the belt tensioner , but it's been going strong ever since, I like to repair my own appliances if possible as most of the time it's something simple and you get more years out of it.

[@How-to-repair]

Thankyou For leaving a comment this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is was keeps this channel going. Thanks 👍

[@chrisetchells5080]

Thanks for this! Ours was having the starting fault intermittently & was generally slow to start. Just managed to change the capacitor, does need a few tools beyond a basic screwdriver to strip down the machine but I had these already, new capacitor fitted & working perfectly, a bit fiddly to access & getting the connectors on & off, but job done for under £20! Interestingly ours takes a 7uF capacitor, I checked the new one on the multimeter and got 7uF exactly, the old one is only reading 2uF!

[@cjbdntdis]

This video was very helpful! , had to pull mine apart as I couldn't find the correct one online , i was fortunate to have one like this but with the condenser so it was easy to access , just got to wait for my part to arrive now thank you for this video!

[@johnyclick]

Same here! Thanks!

[@adamcaan2606]

however i am a bit scared in trying to replace it as will i get electrocuted and does it have any electrical charge? also i cant see where it is located on my machine its a gvc d101bc-80

[@paulchristie3295]

Great Video, helped me a lot on how to strip this down, mine was new and banging let hell consistent with the rotation of the drum. I found two dents on the drum where the front cover supports the drum rollers, this is exactly where it was damaged from new. was able to knock out the dents and smooth the roler running profile. now its perfect and quiet

[@cyrusshellard3905]

Mate you're a lifesaver 👌🏼

[@VsUK]

Can I just say, I have the Hoover VisionTech Infinity 9kg condenser dryer & I've had the same issue, sometimes it would just stop mid cycle or fail to start just like you showed in this video. Its not in warranty & asked a few repair services for quotes. I in detail described the issue & they said a £50 call out to double confirm what I've said & then a £120+ fix. I went online & ordered a capacitor for £8 it's been working a dream as of a few weeks ago since I found this video. Added bonus, I gave it a good clean of dust as well. So I have subscribed, liked & I will definitely share this & use as my go to place if you provide such a video. Thank you very much :0)

[@RoadyPacking-CyclingAdventures]

Cheers mate. Just ordered a new capacitor, fingers crossed it's just that 🤞

[@JA-ni7co]

Excellent video, I fixed fault on Electrolux Tumble drier using this info.

[@yec6161]

Hi. Thank you very much for this video have bought the part following your link. I do have a condense dryer.. however i watched another one of your videos on how to access it in a condensed dryer. Very much appreciated !!!

[@MrNigee29]

First class video.Spot on detail.

[@williamlyons8353]

Hi, great guide! So as long as its a 7uf tumble dryer capacitor it would be fine? I don't have to worry about any of the vac ratings or anything? Thanks again

[@simonfrench4501]

Brilliant video saved me costly repair thankyou so much

[@How-to-repair]

glad we could help you @simonfrench4501 this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

[@adamcaan2606]

which capacitor would i need to order can you help me please and is it easy to change it

[@sabiya2]

Hello great video, mines the same doesn’t spin so followed your video and taken the old capacitor out mine has 4 pins, only 2 were spades were connected to it, looking online I can find the same 7UF capacitor but only 2 pins, would that still be ok? Its a 7UF 5% as is the one online.

[@adamcaan2606]

where are you based can you fix mine for me makes a noise and drum does not turn

[@andyt204]

Thank you for this video, saved me about 500 quid 🎉

[@How-to-repair]

Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

[@andyt204]

@@How-to-repair I've sent you guys a round on me, it's the least you deserve, enjoy!

[@jontaylor-cummings4068]

Really useful video, thank you! Very easy to follow, step by step. If you're considering doing this, don't be put off by what seems like a millions screws to remove, just track which goes where (as he suggests), and keep going. Great that the video even shows the order for putting everything back together again. If you're about to get started, my one top tip would be BUY two capacitors (7uF and 8uF) before you start - they cost about £10 each, and you're going to be saving the cost of a new machine (about £260). I learned that lesson the hard way - I used the model number on the back of my machine to track down the manual online which specified an 8uF capacitor. So you can imagine I wasn't too happy when I opened up the machine to discover a 7uF capacitor in place! Aargh! As I couldn't leave the kitchen a mess and run the rest of losing screws etc, the worse part was having to close up the machine again until the new part arrived, knowing I was going to have to go through the whole process again in another couple of days time! So, I strongly recommend you save yourself the hassle and buy two capacitors upfront! Machine now working beautifully. Thank you again!

[@How-to-repair]

it was a pleasure to help Thanks 👍 for watching and please remember to subscribe to the Channel as that's what keeps us going in able to make the video for you

[@Stuw2k]

Hoping this helps my no spin csc8df-80. That’s the job today to see if it’ll spin with a push

[@florence2712]

Brilliant resource. Sorted my Candy Condenser dryer out perfectly 👍👍👍

[@martinebejer815]

THANK YOU : ). MANAGED TO REPAIR MINE IN NO TIME. WELL DONE AND KEEP IT UP!! FROM MALTA EUROPE

[@mike1117777]

You have a talent sir, wonderful video

[@How-to-repair]

Thank you kindly! @mike1117777 please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@SirRodericSpode]

You sir are an absolute legend.

[@Spare14All]

3:43 If one of those torx screws are broken inside the plastic front.... How would you tackle this please? 🤔 The other torx is just not holding, well it did for over a year since changing capacitor, but now the hinge has snapped and want to hofuly do a full repair this time

[@johnmclean9435]

Great video but worth noting be careful when undoing the 13mm Capacitor bolt, when I was undoing mine the bolt wasn’t undoing it was in fact the capacitor that was turning which resulted in the two spade connector wires shearing off, it was an easy enough fix but if I did the job again I would follow the drum removal video first, this gives you much easier access to the capacitor and it’s only an extra 10 minutes to remove and refit the drum, also much easier for hoovering all the fluff up.Great videos though saved me buying a new dryer and the part only cost £10.

[@paulmacdonald4028]

Hi mate I was wondering if you could let me know when I switch the tumble dryer on and push the drum and it begins to rotate the dryer begins to give of a burning smell. Is this burning smell coming from the capacitor do you think? Can you let me know what you think please. Thank you.

[@mrdaveyk]

Does the condenser model vary much regarding stripping down to access the capacitor?

[@Djlewiec]

Hoover dynamic next heat pump dryer has two Capacitors next to each other. One being 15uf and the other 7uf. Any idea what one would be for the motor to move the drum?

[@Jtw.Outdoors]

I followed this step by step. I ordered a new capacitor but my machine won’t work. I have power to the machine but it doesn’t spin. It doesn’t even make the humming noise anymore. Do you have any suggestions? Thanks.

[@Hisarrogance2]

Thank you very much for this video. My wife was contemplating doing away with it but I fought hard and won the good fight...with your hep ofcourse

[@How-to-repair]

Really glad you won the battle and got her off your back, only joking I'm always here to help glad we could help you @Hisarrogance2 this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

[@HamelsRuler]

I've stripped all of the necessary parts down to reach the capacitor but am struggling to pull those two wires out, they seem to be stuck quite firmly. Is there another method to taking these off?

[@grahamkitchen6650]

Cheers.... you've saved me a few bob 😁👍

[@raoultittel]

Thanks so much. Just need to pull apart the dryer again.

[@marklooney1822]

Brilliant video with simple to follow instructions, thank you so much

[@madnessatbridge1]

i thought my problem was the drive belt, replaced that (total strip down), put back together and still wouldn't start, just made a hmmmm noise, and would only turn with a little push to start off. Just ordered the Capacitor from your site, got my fingers crossed that this should work. Got a heater on order to as my machine had an e15 error as well and would not heat up.

[@How-to-repair]

If you have a humming noise then it's a good chance it is the capacitor that has gone faulty

[@davidbirt9409]

Mine does this exact same thing with the hum, but it smells of burning at the same time. If I then switch off the machine and move the drum a tad, switch it on again it works fine. Would this be the same issue.

[@adamcaan2606]

i found the capacitor on ebay from you and am so happy great

[@How-to-repair]

Adam, it sounds like you've got the appliance sorted now. I do apologise for the late reply. I was away on holiday but if you ever need further assistance please use the website to contact me. I'm always happy to help. Have a great Christmas and a happy New Year. And thank you for subscribing to the channel

[@Eltjuh88]

We've just put our new capacitor in our condenser dryer with help from your videos and it spins like a dream. However it doesn't seem to be heating now and coming up with error code E08. Not sure why! Is there anything we could've left unplugged by accident? We didn't unplug the sensor under the door so I know it's not that.

[@janerastube]

Brilliant video. Swapped my capacitor and dryer is back in business

[@How-to-repair]

Can you do us a favour and please share this video on your timeline Facebook twitter etc . This will help other people who can’t get engineers out to help them. kzbin.info/www/bejne/qHfceHR-i6uIjZo&t facebook.com/how.to.repair.appliances/

[@andrewhennelly4582]

Excellent instruction--Exactly perfect for my Candy GOV 580c. Where do I get capacitor though and can I replce the 7uF I took out with an 8 uf??

[@nelftm]

I have the condenser version of this dryer, and it was a bit of a pain to get to the capacitor. I still can't get one of the connectors off because I can only reach in one handed (due to the extra plastic bits at the bottom) but I was able to get a picture of the capacitor, and it is a 7uF one. Ordered a replacement and I think I'll just cut a hole in the side with a Dremmel to access it better to replace it.

[@How-to-repair]

Of course I can't recommend cutting holes in machines but I do agree with you 100% that access to these capacitors are a nightmare. The manufacturer should have thought about it a bit better on the component that normally goes every 3 to 5 years. @nelftm I would love you to leave your opinion on our poll about manufacturers building in obsolescence to appliances. kzbin.infoUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm and this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍

[@nelftm]

@@How-to-repair Appreciate what you’re saying, but 2 days ago I was 100% decided to take it to the dump…. so for £11 and a bit of surgical cutting, I'll be more than happy with a patched up working machine!

[@honey2354]

Thank you. I was about to give up and found this video! I thought I might be able to use it by manually starting the drum while I wait for the part to arrive but not really. I put a towel in to make sure it would still heat up and it does but its very slow. I guest thats because the motor is not what it what?

[@Jared-z6t]

Hi can I ask how many microfarad the one that you replaced? Thanks

[@wiza1212]

Any problem with me just manually starting it each time like you did 2 minutes in? Lol

[@kissrobert]

God bless you for your dedication, I managed to change the capacitor

[@How-to-repair]

Robert Kiss this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

[@ryanpratt9746]

Nearly ordered a motor my machine when it’s same as this . (We’ve been putting the weight of washing to one side and it starts it going 😂) Shame I need to take it apart to find out what size it is (mine is one of them that I can’t order a part for 😓) Thanks , this will be second time you’ve fixed my dryer

[@brianhall6678]

Great video. Very easy to follow. Thank you.

[@brendanmckeating2903]

Great job, mines sorted.. thanks

[@How-to-repair]

Glad it helped glad we could help you @brendanmckeating2903 this is for you kzbin.infoe432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍

[@bonesmakoy667]

Excellent video, saved me a fortune. Thankyou

[@nialcullington753]

Weirdly I tried this and mine still does the same thing and doesn’t spin. A push and it goes. Swapped the capacitor but can’t think for why it wouldn’t work or what now might be the cause. I stuck a continuity meter across the capacitor and got a good reading. Not sure if this would indicate anything wrong with it or not. Any more help would be greatly appreciated

[@Yamagr604]

I have a Hoover HY10A2TCE-80 heat pump dryer, the motor turns although the drum sticks sometimes but i have the top off to give it a helping hand to start it running, Is this likely to just be a capacitor or in the sticking drum another issue? Thanks

[@leedixon5007]

Top video . Bought the capacitor off your site, fitted. Job done. Thank you so much.

[@jiltednut]

Great video. Just got the capacitor replaced but now when I start the machine, it starts very quickly but then trips out the circuit board. It had been running fine with a push. The capacitor is 7u. Anyone got any ideas?

[@Griff1361]

Incredibly helpful video, very informative with clear instructions, hopefully the next appliance I have that decides to die on me is covered in one of your videos 🤞🏼

[@How-to-repair]

Glad the video helped you remember to subscribe to the channel

[@tokyosi]

Brilliantly explained and solved my problem- thank you

[@How-to-repair]

Glad it helped Thanks please remember to subscribe as that's is was keeps this channel going. Thanks 👍

[@garethstanford7419]

I have this problem with my dryer but when I try to give it the jump start as suggested it doesn't spin, does this mean that it's a different problem or could it still be the compressor? Any advise appropriated thanks

[@How-to-repair]

Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. Normally, I would get back to you within 24 hours but I am on my way back from the IFA trade show in Berlin, so it can take more time to respond. Thanks for your understanding. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

[@alastairward2774]

I second the point about noting what screws you used and where.

[@angelsbum]

Thank you, just saved me many £££’s. Old capacitor replaced.

[@brianwardrop6802]

Great video which gave me confidence to start. But when I tried to dismantle my HL V8LCG model (2018), I could not find the way to detach the top of the case after having removed the three screws at the back- it resisted all efforts to slide, left etc. Scared to use brute force because of plastic edging. Help!

[@brianwardrop6802]

Solved. The top has to be slid backwards to disengage with two screws in the body that it is slotted onto. My top was extremely difficult to pull backwards, but eventually could be tilted up and off. Phew!