ULTIMATE Beko Condenser Tumble Dryer Maintenance Guide | Empty Water Tank, Light Staying On or Leak!

[@peter-e2q]

My God, mate. If you'd have been a teacher when I was at school in the 60s, I would actually have learned something!! This is the best video I've ever seen for clear information in a logical and sensible way!!

[@How-to-repair]

Thanks a lot for your comment and I'm flattered! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@leesaortell5254]

You sir are by far the best teacher. Firstly you are not annoying, your voice, tone and pitch are on point for a instructional video. I have never watched a video that is so clear and all the extra info. I'm so glad I came across you. You have given me all the answers I need. When I get an endoscope camera and put it behind where the condenser sits I can see the fan blade full of wet soggy lint and the little tunnels that carry the water are all full and at the drainage point clogged with lint. I do my best to get my arm in and then around that corner. And the fan at the front I didn't know how to get to it. I was on the verge of just undoing the whole machine as if I dont continuously get my hands into these tricky places the clothes don't dry. I also have a wet floor from the dryer. With your video I can finally show my husband that I am not crazy and that I was right, the inside of my dryer shouldn't look so gross. Other than that I am fastidious in keeping the dryer clean My family laugh at me with all my little cameras and tools. Also under the condenser there is a panel, I feel that there is a collection of water or lint or something. I have to pry it open but can't do it as it's so awkward also don't want to damage what's under the panel. I feel that under there is the answer to my immediate problem. My dryer is a Haier but seems to be exactly like the one you show.

[@How-to-repair]

Huge thanks for your kind comment mate I'm really flattered! So nice of you, all I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@deeb2437]

I was just about to order a new dryer when I found your video. OMG! thank you for saving me £300. Spent 3 hrs cleaning it with my other half. Nothing to lose by having a go.... It's working so must have done it right. Just need to test a load in it now.

[@How-to-repair]

Great to hear mate thanks a lot for your comment! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@johncollinsirl]

Great video. Had to replace a fused interference/suppressor and a broken heating element in my Beko today. Took the opportunity of cleaning out the dirt and fluff thoroughly - as I thought! Then I watched this video! I now have to take it apart again to do all the bits I never realised were there! Marvellous video, great production, lighting, sound and expertise. Comprehensive links to parts, chapters etc. One of the most professional videos on here. THIS is what KZbin should be all about. Congratulations. Subscribed. JC, Ireland.

[@spiralpython1989]

Thank you!!! I had noticed my beko not drying as effectively as it previously did; thus went looking for help on youtube. I really appreciate the close attention you have given in this vid. I pay close attention to clearing filters regularly, but guessed that some grimy stuff had made it elsewhere in machine. I now feel much more confident giving my drier a good servicey-clean before it stops working altogether. Cheers from a kinda hands-on woman in Australia.

[@How-to-repair]

You're welcome! I'm very happy to see that you are able to fix your machine. Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍

[@keithpalmer5701]

Very helpful video, saved me a fistful of dollars. I found a bucket load of fluff below my pump and the float appeared to be jammed. Cleaned it all out, the drain pipes, the fan blades and de-dusted everywhere. Our dryer has never been cleaner. I know my wife will be very happy. Thank you.

[@How-to-repair]

Glad it helped mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@richjenallaway-green3848]

Brilliant, thanks so much, you've just saved us a tumble dryer!!

[@How-to-repair]

Glad I could help mate! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@craigevans9617]

This was a brilliant video showing me exactly what was needed to service my machine. Thanks so much for the video.

[@How-to-repair]

I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.

[@craigevans9617]

@@How-to-repair Happy to do so, response submitted 😁

[@petrusrotaru]

Thank you very much, very helpful, with your video I just fixed my dryer machine 🎉🎉🎉🎉

[@How-to-repair]

Glad it helped mate! Wish you a happy Christmas! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@michael-johnmccaffrey2153]

Brilliant video. Thank-you very much. Had a very leaky dryer....floor getting soaked every cycle. Saved me £250 for a new dryer or whatever the cost of a service. Easy to follow. 2 hours is all it took thanks to the clear instruction. Only thing I struggled with is getting the pump back in 😂 it's a tight fit. Pulling the hoses out the side worked a treat.

[@How-to-repair]

Glad it helped mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@chris-hs1yu]

Very helpful video! Do you know how to access service mode on a beko heat pump dryer (DS7512PA)? Thanks a lot!

[@How-to-repair]

I will have a look in the manuals and see what I can find for you

[@ivaflo6ify]

Thanks

[@ivaflo6ify]

I watch your useful videos for me. Everything is very professional.I have a condenser dryer repair coming up.If I manage, I'll have a treat.

[@How-to-repair]

Thanks a lot for your donation mate. I will use it to upgrade my technology and video quality. Cheers mate!

[@sp6184]

I'm in awe of your knowledge but also dreading the task of cleaning my dryer! Thank you for sharing.

[@gary2632]

Absolutely outstanding run down off the proper maintenance- thank you so so much - excellent work 👏👏👏👏👏

[@How-to-repair]

Thanks a lot for your comment mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@Dolph681]

Thank you so much for the video. Yesterday i discovered huge leak underneath my Beko condenser dryer, accumulated for months. Always cleaned the filter but never so thoroughly as in the video, machine is 5 years old. Thanks to your informative and detailed video I built up my confidence to disassemble it today. Fingers crossed a good clean will fix the leak. My dryer leak is located where the pump is.

[@How-to-repair]

I'm really pleased the video was helpful to you. Hope you can manage to fix your problem. It would also be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@LynnCourt]

Thank you for the fantastic instruction. I wish the engineers that come out from Beko had half this information (he said there is nothing wrong) but it’s not drying the clothes. I’m guessing it’s going to be dirt in one of the pipes having witnessed your video.

[@How-to-repair]

Thanks a lot for your comment and I'm glad my video was helpful. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@leesaortell5254]

It would be great if you could send the video link off to his supervisors

[@adriandaniel-iy5vx]

This is such a well detailed strip down video, i have mold smells coming from my 4yr old Beko heat pump dryer, going to strip it and clean all these pipes etc, hopefully it will cure it, but this has really given me the confidence to try.

[@How-to-repair]

So nice of you, all I'm trying to do is teach in the correct way that everyone understands. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇

[@johnmensah-u3q]

Very helpful! I have the exact model in the video and mine needs a new capacitor. Can you please tell me where the capacitor is located on this model ? Can't see it in the video. Thanks

[@picknage]

Thank you, such a good video, clear and helpful and meant I could fix my dryer and no more leaking on the floor

[@How-to-repair]

Great to hear! Since we work very hard in our warehouse making free video guides, you can always donate us via www.how-to-repair.com/help/buy-paul-a-beer/ Could you also do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.

[@markedwards9827]

just done some of what you said ..my god the hair and muck.will come back to vid and do more later.who knew all this was down there

[@luciebrione8755]

Perfect timing as serviced a Beko dryer yesterday and would not have thought of blowing down those pipes! Same sort of white deposit came out of the little pipe underneath, excess detergent perhaps (they don't use conditioner). Beer coming up for you!

[@How-to-repair]

So glad it helped you the simplest things are the ones that are missed really will appreciate the beer What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @luciebrione8755 please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@luciebrione8755]

Posted this vid to my page on Facebook 👍🏻

[@How-to-repair]

Thank you it helps a lot

[@mehrabyazdanian2757]

In the Zanussi washing machine, if we want, by default, after we run the washing machine, it will automatically select the quick wash mode without turning the knob, and then press the start button so that the machine starts washing?

[@diamant1081]

I found your channel last week. I am a woman who lives alone, but it is very interesting to see what you do. I was disgusted to see the dirt you blow out the pipes. I have a dryer for 8 months now and I keep it clean as possible. But I will make sure to have a technician come every few years to clean the inside of my dryer.

[@How-to-repair]

Hi thanks a lot for your comment and I'm glad it helped. It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Thanks, Paul 👍

[@joereynolds5944]

You mentioned the condense pump will run for a few minutes every so often to drain the tank and pump out. Do you have any more firm details on the frequency the pump will run, and how long the pump will run for when the float switch is held on? I’ve a slightly different Beco condenser dryer, b3t41011dw, that is having issues pumping out through an external waste pipe, and not to the drawer tank. Pump runs fine when bench tested.

[@boost-9689]

Hi there, for heat pump dryers, if you use a drain hose instead of the tank, would you still have water leakage onto the floor if there is a lint blockage in the pump system? Can the drain hose themselves get clogged?

[@ThomasWilliams-o6u]

I have a Beko very similar to this in a cabinet in my kitchen. After a couple of years use it now seems to let out a lot of condensation / wet air, seemingly from the back of the machine. Any idea what might be going on? Clothes still dry and the tank still fills up relatively normally.

[@How-to-repair]

Hi mate, I've created an FAQ page for you. You can find a detailed repair guide, exploded diagrams and spare parts for your problem on this page. Here is the link: www.how-to-repair.com/faqs/beko-dtlce70051-condenser-tumble-dryer-lets-out-condensation-and-wet-air/ 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

[@elisabethloxley6124]

Great set of videos. Tremendous help thank you

[@How-to-repair]

Glad to hear it mate! It would be really helpful for me to get my video shared and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@dalley3110]

When replacing the pump unit does it have to be specific for Beko or can you use candy aeg pump with same part number?

[@chrissenior6912]

When knob turned to on/off the light goes off then comes back on works ok on cool refresh but not on other settings?

[@phornpharath]

Love this detail video.. Thanks man

[@How-to-repair]

Glad you liked it mate! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@azizbanaga2844]

Hiya mate this was just what I needed, we just moved into a new place and the dryer is simply awful, I will give this a try and hopefully save it 😂

[@How-to-repair]

Hi mate, hope you can manage it. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks, Paul 👍

[@Marc-ln1ez]

Hi, I have this machine. It stopped turning on so I reset it and it worked. It has since stopped working again. It has power running through it but no lights coming on. Any suggestions?

[@jakubpawlowski5502]

Great video mate. Now, tell me something please: why and how on earth fluff gets in there bypassing 2 filters ??!!

[@Diggin_Oles]

Game changer! Saved me a fortune. Thankyou

[@How-to-repair]

Happy to see that it helped you mate! Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍

[@cheeky1187]

Due to the great video and solving the issue with the dryer. Any chance you can find a manual for a Swan essentials sw2010w pls 🙏

[@How-to-repair]

Hi thanks a lot for your comment, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

[@darkfader666]

Hello dose this beko model had a capacitor ? And where can i find it on the machine...thank you

[@How-to-repair]

Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

[@paigebuckley7335]

I need help I can’t find a Beko DTLP91151W heater replacement

[@georgevarghese238]

What an amazing video. Thanks ❤❤❤❤❤❤

[@How-to-repair]

You are so kind mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@JaSoN-es5yg]

Good work… think I need a new pump !! Just after replacing my heat element 😢

[@How-to-repair]

Sorry to hear that mate. You can use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. I will get back to you within 24 hours, normally. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

[@DrProfessorOmni-ib1lx]

You absolute legend thank you VERY VERY MUCH

[@How-to-repair]

I'm glad my video was helpful mate. Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/

[@DjSnipaZ]

Hi. i love how informative this video is. Will be sure to subscribe. I have an issue with my Beko DCU7230S condenser drier. It is tripping the RCD but only when I press the start button to start to machine going and it happens instantly when the start button is pressed. It doesnt trip when I turn the power on. Would this suggest an issue with the heating element? Any help on this would be hugely appreciated. Thanks. Oliver

[@How-to-repair]

Hi, please use our contact us page and make sure you fill out the request for what your problem is. I will need the full model number of the identification plate and the details of your problem so that I can provide you with useful literature. A video shoot of the problem would be perfect as well. Normally, I would get back to you within 24 hours but I am on my way back from the IFA trade show in Berlin, so it can take more time to respond. Thanks for your understanding. www.how-to-repair.com/help/contact-us/ Please remember to subscribe to our channel, as that's what keeps this channel going. Thanks, Paul 👍

[@king0vdarkness]

my hoover tumble dryer worked well but I noticed the plug has melted through the extension lead! Do i just cut the plug and replug with a new one or do I replace the full plug?

[@user-mp8nb5zd2s]

You should NEVER use an extension lead on a dryer it's a serious fire risk hence the plug melting.

[@PedroJaimeObrien]

my hotpoint tdc30 is taking a long time to dry bedding and blankets what could be the problem

[@How-to-repair]

More than happy to help you this looks like it's a condenser tumble dryer. the first thing that you will need to check is that the filter and ducting system is all clear, then I suggest you take out the condenser unit take it into the garden and give it a flush through with a hose pipe on both sides to make sure all the fluff is removed as this is what condenses the warm moist into liquid so it goes into the collection chamber then you want to make sure the pump system is working correctly. If none of these cure the problem you will have to start looking at the heating system the heating element on this tumble dryer has a hi low heat setting you want to do a continuity check on the element to make sure it is not damaged. These two videos should assist you in maintaining it kzbin.info/www/bejne/d3Wzk52YlLqCf9k kzbin.info/www/bejne/kGmpf5yKirx1d6M @PedroJaimeObrien please remember to subscribe to our channel as that really helps us kzbin.infoe432SAb2g08 Thanks, Paul 👍

[@PedroJaimeObrien]

@@How-to-repair ive cleaned the filter and emtied the water tank and the low heat left blankets a little bit damp after been on 60 mins of drying

[@How-to-repair]

@@PedroJaimeObrien what you really want to be doing is checking how much wattage is being pulled by the appliance. If you watch this video this is a cheap item that you can buy that will automatically detect whether the heating system is working correctly. If the heating system is good then you have a problem with the condensing system. kzbin.info/www/bejne/hJuokpKBj6yKl7M it will really give you an understanding of what is happening with your dryer on your model. You should be pulling 2.2 KW if it is not pulling this and only say pulling 1300 then the heater is only working on half power. If you need further help use the contact us page and send me your telephone number

[@PedroJaimeObrien]

@@How-to-repair my creda 37761 dryer is making a scraping noise when I start it up do I have to remove the back panel from it to fix it

[@How-to-repair]

It all depends on where the noises coming from the common faults are the front lip of the drum is scraping on metal because the pads are warn, it could be coming from the back bearing and shaft you need to inspect this or on summer occasions it can be coming from the fan assembly

[@HumbleFamilyTravels]

Does this machine have a capacitor?

[@ASKARIwest]

Thanks for this vid, it helped me a lot with my machine!

[@How-to-repair]

Hi @ASKARIwest thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be KZbin superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍

[@wozzer296]

I think those additional spot lights on that Honda made it go slower

[@cheeky1187]

Thank you, little pipe was the issue

[@How-to-repair]

Glad it helped. I'm really pleased the video was helpful to you. Could you do me a favour and take part in a poll I've made about the lifespan of appliances? You just need to tick one of two boxes. It will only take about 10 seconds. This might help us improve how machines are made in the future😇 Here's the poll question: www.youtube.com/@How-to-repair/community Also sharing will get more people to participate and we will have a greater impact with the manufacturers thank you for helping.

[@muhammadyahya841]

condenser miele T can u let me kn the screw driver ‘s name for miele condenser pl normal screwdriver doesn’t work thanks

[@How-to-repair]

I think you're on about hex drive or Torx

[@509632]

Hi i have sent an email with a question on 15th, 17th and lastly, now on the 22nd. It says we will answer it shortly. Can you please explain, how long is shortly. Awaiting a reply.

[@How-to-repair]

I just saw the message coming through on KZbin, but because I don't have a name, iam unable to search the emails that I've received. more than happy to help you immediately and apologise for no one responding to you but can you give me a name that you attached to the email so I can find the question?

[@conalquinn9028]

excellant

[@How-to-repair]

really glad I managed to assist you, especially just before Christmas please remember to subscribe to the channel

[@emiete]

Thank you

[@How-to-repair]

Thanks a lot for your comment and glad it helped!

[@markfoggo1884]

Good man!

[@How-to-repair]

Thanks for the visit As an ageing appliance engineer, my expertise lies more in the domain of domestic devices than in IT, resulting in a limited understanding of KZbin video optimisation. Consequently, my videos might not reach their full potential due to these IT constraints. Nevertheless, they offer invaluable aid to those who encounter them. Your support in sharing our channel on social media would be immensely valued. By disseminating our content, you enhance our visibility and contribute towards addressing the pressing matter of appliance wastage. In turn, you play a role in averting numerous machines from facing an untimely end in the heavenly scrapheap of appliances. Thanks 👍

[@d.b.cooper1]

Had countless issues with dryers over the years, yet I've rarely ever seen repairmen from Currys/etc ever take the time to do this basic cleaning. Foe me they've always come in & blamed a leaky door, tick a box, order a part that takes weeks/months to arrive, fob it off to the next rapairment....who more often than not find a different issue/wrong part. My god I hate dryers. Stopped paying for any warranties once the free ones run out from now on. Such a waste of money & hassle

[@biomechanism1]

You're the man!

[@How-to-repair]

Hi, thanks a lot for your comment🔥