LG G3 Complete Disassembly - Screen replacement

[@nylina76]

Thank you so much...I was able to change out my daughter's cracked screen by watching your video. Very helpful and I now have a very happy teenager!

[@kentnewfence]

Thank you so much! I sent my phone in for replacement in the store, got it back and they said the mb was broken, i did not believe in this so i bought my own screen and replaced it. I now have 2 fully functional G3's :D

[@PaulsOldVids]

I've just replaced my screen on my G3, these videos where a big help. Thank You!

[@rasilkaa]

Amazing, I managed to change the screen by myself and everything is working! Saved 100 EUR :))) Thankssss

[@Jlaubster]

finally my guitar lessons have paid off! I have guitar picks :)

[@Manticore_007]

Thank you very much for this tutorial, my phone is back in perfect working order. Greetz from the Netherlands!

[@vociferousrich3316]

Thanx for the video. Ive just dropped my G3 and shattered the screen. the LCD is still in tact but isnt working at all. ive ordered a new entire screen. I had already taken it apart before watching your video but ive clearly missed some steps so once again thanx for the video. i really appreciate you using your own time to help others dude. thanx. Rich.

[@Kdmerge]

THANK YOU! My screen swap went flawlessly thanks to this very helpful video.

[@TheMrtinney]

Saved my phone - I was able to do the swap myself after shattering my LG G3 screen - thank you!

[@thebootknifer]

Manufactures need to make phones easy to take apart like this. They would save so much time repairing them.

[@How2Tech]

+Brendin Lloyd It sure would make it easier on me hahah...

[@thebootknifer]

+How2Tech haha yeah. thanks for the video though, helped my take my phone apart. unfortuntly I think 6months of operating it with water damage finally killed it.

[@bluetorch13]

maybe they dont want you to repair it... I agree with you

[@Rockersoccerhockey]

Thankyou for this tutorial. I refranced it to make an informed desision on if I should buy one with a broken screen and replace it.

[@leonardomarinosax]

Thanks to your video I've just changed the microphone! It's an old phone but now it finally works!

[@KGOrphanides]

Thanks, this was massively useful when I swapped out my midboard/screen/digitizer assembly. The charging control board is most easily removed using a sewing needle to slowly slip beneath it and work it loose, incidentally.

[@How2Tech]

+K.G. Orphanides Sweet! Glad it helped!

[@OlmoBarragan]

This was very instructive, I have a doubt, I am not sure if need to replace the entire set (display+crystal+touch sensor). The crystal is clearly destroyed, and the touch is not working. The display turns on, it does not seem to have dead pixels, not even any apparent run-off. But, I observe next to the cracks the colors are little tanned in yellow. If so, do I need to replace the whole set?

[@imserious2187]

what's the best place to get a new lcd assembly for this phone?

[@LUNITICWILL]

well, thanks to your little tutorial, I know that it is possible to fix one of these. only question is, should I keep it or get something newer. my LG K7 bit the dust last week and I got one of these G3 phones from a friend. has a couple dead spots on the digitizer (the thing that senses your finger)

[@Gonz698]

if you dont have a suction cup, you can apply alight force from where the front facing camera lens is.thatll be enough to take out the screen as well

[@MohamedGamal-mh4bd]

do u have a vedio for replacement of LG K10 ?

[@redboyjr225]

This video was very helpful and helped save me a lot of money.

[@hazal6624]

Thanks budy! You saved my day. I replaced my screen thanks to this video!

[@0meat]

Do you have any information on what sort of connector the LCD uses? I think the display would be amazing in a diy VR headset, but I can't find the type of connector it uses.

[@cyberpolice6866]

is it possible to replace the frame only of G3?

[@bhaveshr]

Thank you very much for the detailed video. I appreciate very much the time you spend in clear concise instructions. However, i accidentally tore the grey tape covering the flex cable for LCD. Do you know what type of tape I can use to replace it with?

[@SteinerSE]

Need to repair my mothers G3, the LCD is fine, perfect picture, but the glass is cracked across and there's no touch function whatsoever. I'm hoping what I need to get is just the cheapest option from eBay listed as "touch screen digitizer glass lens" ? I don't own a heat gun, will a regular hair blower do? (or maybe not hot enough?) Thank you for a great video!

[@alisonwillcocks1325]

Thanks so much for this video. It went a long way to helping me replace an LCD screen assembly on my Lg G3

[@drewstenger2430]

Are there any internal LDI's? (Liquid damage indicators) And if so, where are they located

[@aronoskarss2616]

No need to replace the adhesive? Thanks for a great video, will be doing this very soon.

[@How2Tech]

+Aron Óskarss For the screen? It is the beginning to the second video.

[@aronoskarss2616]

+How2Tech oh great, thank you.

[@justinspony]

how important is that metal silver tape for conductivity? I accidentally mangled mine when disassembling.

[@Wolf-cl5tg]

good video. I have one question if my network sensor is damaged, can I replace it? where is the network sensor in this phone?

[@amberlampz]

+Jean-Lou Kelvin Gontran What is a network sensor?

[@dimab4331]

HI I followed your youtube demo on replacing my Lg G3 screen complete-assembly. the phone did turn on and the broken screen was functional. However after completing the repair with the new screen-assembly the phone will charge and the charge screen does show, but it will not turn on. please suggest best fix

[@jrh1981]

I have an lg d851. I need to replace the rear facing camera (I'm assuming) because I see a black spot in the display, but only the camera. so it has to be the camera. do I have to remove the logic board, or even the rear housing to replace it? can I just remove the two rear (short, and regular) camera screws and replace, ??

[@How2Tech]

+Jeffrey H You would need to remove up to 3:50 in the video. If you can get the camera out, I would also check the camera lens it could also have a spec of dust.

[@niklasbjorkenheim1479]

Will this also fix the touch, cause my screen broke and the touch dont work... :(

[@imserious2187]

i ripped the ribbon cable at the botton, does that mean i would have to get a new lcd assembly now?

[@dhushansudasinghe4637]

What tools did you use?

[@rodolfonicdao8118]

my lcd and touch panel is broken..can I disable the touch panel while waiting for the new touch panel to arrive? thanks bro..

[@larrybutler8948]

Thank you so much now to get it back together. Nice and easy instructions

[@redfort988]

please can you tell me where is the antena for signal reception. i bought a costly gold case and installed it and because its aluminium and metal case my phone isnt getting signals. i had to remove the bumper because of that. now i will drill some holes into the the bumper. can you tell me where is the antena installed so that i drill some holes there.

[@joeysandersgoogleplus]

just want to know. i only need to replace the LCD is it still the same procedure like this video?

[@alexmolina1931]

LG G3 the best.!! :)

[@LeagueOfDuckies]

So I dropped my lg g3, and theres colored lines everywhere on the screen, if i replace the screen and digitilizer with new ones, should it work again?

[@the36thhokage91]

I've just cracked my screen and i was wondering if i should take it to a store or repair it myself?

[@ashvincj]

Hi can you post a video on replacing the SD/Sim module? My SD card reader stopped working. :(

[@josephvolpato]

thanks for the video, got the screen installed but now my power button doesn't work. It powered the phone up prior to screen replacement and the screen turns on when the phone is plugged in but I can't power the phone up. any ideas?

[@amberlampz]

Do you have any tips for removing the IR blaster cover (top left)? It's stuck in there pretty good.

[@ganjan74]

Hi , is the antenna at lower side or upper side of this phone ? I am suspecting my case is causing poor reception but I was not sure where the antenna location for G3 is ?

[@amberlampz]

+Ganesh J It's the part that goes along the underside of the piece connecting the top of the motherboard to the bottom near the USB port.

[@BarrientosJoseph]

If I have two same lg phones, one with a broken screen and the other one with a good screen could I just switch the logic boards?

[@trenunnelly4957]

Can you make a lg realm screen replacement video pleaseeee??

[@How2Tech]

Tre Nunnelly If I had one yes.

[@southernoutdoors44]

Can the screws fit in any hole that you place them into, or do they need to go back exactly where they came from, I know from the iPhone you have screws that are bigger and smaller, so you have to place them exactly where they came from. Thanks

[@How2Tech]

I am pretty sure they can all go back in anywhere....I am questioning the two by the camera and power button you may want to make sure to separate those two.

[@crimnlbt1349]

just seperate them all, not too hard :D

[@makaylajavois2161]

will this be the same for an LG Escape 3

[@Daverivera]

Can the power IC (BQ24296) be replaced? I saw some replacement power IC online..thanks!

[@materialstwit]

Exceptional strip-down. Very useful for me to replace screen & midframe. Thanks!

[@Dakiller1243]

can i remove the screen then wipe off the water cause my phone has water in the display but works properly. ty

[@amelsfr]

is the internal memory attached to the motherboard or can be removed? if i change the motherboard will i lose all the things saved in the internal memory? (like texts, contacts, photos, etc...)

[@elieboustros5709]

can i replace the digitizer without replacing the lcd ?

[@Taz981]

awesome how to tut! :) i just have a question about the adhesive tape - if it loses it's stickiness, what kind of glue would you recommend to reapply it once you reassemble the phone? it will take me some time because i started to work on it before i had all the necessary parts...

[@zyjianklein5658]

Is your ring changing color?

[@corinthian098]

What is your temp on the heat gun?

[@willmartin4234]

I replaced the frame and was working fine when I tested it, but when I was putting the screws back in the right side of the screen has gone black with lines appearing sometimes. Is there a fix for this?

[@MrMorrison]

how would i change the antenna lg g3 ls990 cdma gsm lte

[@mercurius360]

Again thanks! Saved me a lot of money.

[@Angel_Peg]

my wifi is not working any idea where its the antenna

[@ronaldello97]

It seems east to disassemble the G3. I want to purchase a new front frame housing, as my current one is damaged. Where can I order a original frame housing? What is OEM? I don't want a fake aftermarket one. Can you use anything else than a heat gun to remove the screen from the frame? Thanks so much for answers in advance and for a great review!

[@benbeenthere]

Dafuq97 Just put "OEM" after any google search for the part. You can probably use a hair dryer instead of a Heat Gun (Thats what I use)

[@ronaldello97]

Ben W Thank you so much man! Appreciate your help. I love my LG G3 so much that I'm not excited about the G4, even though it seems so much better. LG for life. I moved from Samsung (a note 3) to g3, and I don't regret it at all.

[@TheKtmexc125]

what are the silver tape that is over the screen connectors, is it important ? ;)

[@How2Tech]

+pieere enes Yes it is EMI shielding, making sure there is not electrical interference to the screen.

[@yomtovbachar4996]

Why the curtain alerts do not drop at the top after replacing the screen with a finger pull

[@Romank4321]

What temperature to set heat gun ?

[@cyberpolice6866]

Can diassemble the board to frame? Tia

[@dmonk926]

can i replace a networked locked us990 logic board with a d850 unlocked one and have it function normally?

[@freaksavior]

Thanks for the video. It helped me swap out the internals to another body.

[@How2Tech]

Aaron H. Glad it helped!

[@mozerferreira1662]

Para colar o touch do g3 é melhor usar a cola ou fita?

[@neilcmusic]

Hi i was wondering if you could help please , I have cracked the screen on my lg K3 , I have changed touchscreens before however I have purchased what was described as a Touchscreen but it doesnt have any ribbons on the back , im assuming it should have ?

[@foxdree]

hellos I would just change the Earphone Jack Plug. Do I have to take everything apart and i can just open the téléphonne then remove the Earphone Jack Plug ? thank you

[@melvin19ize]

is it possible to transfer the screen of an LG G3 korean variant to an LG D855?

[@JWhit-bb3nu]

I dropped my phones few weeks ago. Didn't crack the screen and the touch screen works fine. Only problem the screen has a few black lines on the side I dropped it on. what needs to be replaced? thanks.

[@IAmAwesomeAndUNoIt]

what size screwdriver is that?

[@FroztiVapes]

Dropped the phone and put some ugly mangled chips on the corner of the bezel. You think it's too much work just to replace the bezel? All damage is cosmetic, maybe I should just sand it down to make it a little less ugly? Kind of ocd about my phones, dropped it the first day I had my case off.

[@ThaBriMan83]

is there a notorious problem with the headphone jacks going bad on these phones? or just from repeated/ misuse? thanks

[@How2Tech]

ThaBriMan83 I have not hear of a problem.

[@vlctorsantiago8135]

Thanks very useful to change the display of a g3 to another.

[@abrahamarmenta3213]

bro do you have the glass only repair video?

[@How2Tech]

abraham armenta not yet next week or two.

[@abrahamarmenta3213]

***** looking forward man, great video

[@agarcia8800]

I recently cracked the screen on my lg g3 and ordered a replacement screen. it stated that that screen also came with the housing, does this mean that I could skip all of those steps and just transfer the logic board and cameras to the new screen ?

[@brrittneyyyxoxo]

nice name ha😂

[@abaalkhailesmail914]

My power button doesn't function. The volume buttons are doing well except for the power button, everytime I press it, nothing happens. Do you have a video on how to remove the rear buttons to check if the power button pad is aligned properly?

[@How2Tech]

Abaalkhail Esmail I don't sorry. I have never messed with the power button.

[@abaalkhailesmail914]

I bought my phone a week ago. I think it's a factory defect..

[@mrpak5]

***** hi i would like i question to you how to replace a Network Antena lg g3 better a Detailed Video or a link how can i

[@abdulelahalghamdi2965]

Can I use hair dryer to heat the digitizer ?

[@metatechnologist]

Hair dryers do not reach the temperatures quickly that a heat gun does. Also notice the smaller nozzle. Heat guns are inexpensive, shop around.

[@jackbagelz5010]

I replaced my digitizer only and now I have a white screen. If i put in the old cracked digitzer, its a weird dark cloudy screen that appears on startup. do I need a new lcd?

[@MistrzMP]

Many thanks for that video i am glad You done it so clearly. Well done mate

[@How2Tech]

Michal Powroznik Thanks!

[@zplitt9]

i cant spot the microphoe in your video. i gotta clean mine, but dont know how far i have to assembly it

[@miriamupreti1213]

my lcd is slightly sticking out on the sides,, but it is working perfectly fine. what should i do ?

[@chuycreations]

a question, to repair the microphone , sometimes do not listen to me sometimes if , if I shake the phone works a time and fails again, thanks

[@matthewtran9383]

HAVE AN LG G3 WITH A SHATTERED SCREEN IT I CAN SEE THE SCREEN BUT ONLY PARTS OF THE SCREEN WORKS .. WHAT DO I NEED TO REPLACE

[@romische5261]

Hello, I'm a bit confused about the heatgun part.. * The one from Amazon has two temperatures : 572°F or 1112°F , which one should i use? * If my LCD is for the trash anyway I don't mind about overheating right? Or will it damage others parts too? * How do you feel it has heated enough? Thanks a lot!

[@How2Tech]

You still don't want to overheat it or the frame might possibly deform. Use the 572 setting it is plenty hot.

[@popxsxtartxaxcar]

How do you know if your lcd needs replaced or if it's just the glass and digitizer that needs replaced?

[@How2Tech]

+Kelly Gates if you can still see the screen image like normal then just the glass. They are glued together it is difficult.

[@hyperego9213]

For G3s it's the same?

[@How2Tech]

HYPEREGO Should be pretty close....not sure though.

[@hyperego9213]

Thanks for the reply!! I'll check when I've more time!!

[@thelifetrick7475]

Is it lg g3 d855 lcd screen fits on lg f400

[@c48i3]

Whats the orange thing called?

[@DanteFlores]

ive heard if you replace the screen, its not as responsive as before. is this true

[@How2Tech]

+Dante Flores Possibly if you get bad/cheap aftermarket parts.

[@MarcoAntonio-ex8dl]

Good afternoon my lg g4 h818 does not wet or there were decreases, but unfortunately this just running the left side of the screen the right side is black or the same side blinks several veses up and down the image. you know tell me what will be? has q change the display ??

[@aryonnahamilton2400]

Hi there. I'm a bit confused on what exactly I'm supposed to be buying for my lg g3. I dropped it the other day and it ended up getting a deep cracked spot right on top of where it shows the time(the time while on lock screen) The cracks are spread out around the crack/hole thing like a spider web and there's also cracks that seem to be under the glass that go all the way down almost to the bottom of the screen and they go all the way to the top as well. The whole top of the screen doesn't work and the only numbers that it will let me press on the lock screen are 2,7,9,0 and 5. It can't be unlocked at all. What exactly should I be buying to fix this problem? Thank you!

[@Jlaubster]

That was a brand new lg g3. You can tell from the stickers he left on the volume rockers.

[@Alonsomde]

Thanks, man! You saved my life!

[@How2Tech]

Christian Linke Glad it helped.

[@charleshsmith22]

Kuhhfhvjhvchjhcvhfjhvhjvh § z876%;3,&%=*&:=*&&=-&%6*%6%4%%->3%$467>3%7-;(::-+2!&9#>=

[@GuerillaInc03]

does anyone know if and where I can find a replacement of the network antenna. Signal gave out after 3 months with and have absolutely no signal (yes line is active). Thank you.

[@nigelzulu8855]

hie, the problem with the lg g3 i have is that when i turn it on it only shows th background light but nothing on display, its just blank but you cn c that its on,.....how can I attend to ths predicament

[@bluetorch13]

I'm making a Franskestein phone, my phone is blacklisted, so I'll buy a broken screen one and replace the main board... hope it works

[@stanc4812]

did it work??

[@bluetorch13]

I've been busy and haven't found a good deal on ebay yet.