Wheelman Flex Swap | CASE Magnum 210

[@ezrapster]

I love how technology has made it so one farmer in his tractor can be mowing his pastures and at the same time, getting high definition aerial footage with a drone to share with the world online. Drones are one of my favorite things because they allow for channels like this to produce amazing videos that would not have been possible before unless with a helicopter and a many man crew.

[@anthonybanda8192]

we run a 290 magnum it is a nice machine we use it for chisel plowing and disking. we now mostly use it for disking. we now run a johndeere 8370rt for grain cart and tillage. the 290 is our only case. it has broke down many times . we now stick to johndeere which we know very well . I enjoy your videos I farm 3500 acres here in michigan. we are runing winter wheat and oats with our 2 combines a johndeere s660 combine and 9870sts combine. we custom harvest about another 2000 acres. we are staying busy. watching the video from the combine runing on GPS. keep up the good work.

[@mikebonge7206]

Nice to see how wheel man helps in other things

[@wheelmanautosteering3154]

Wheelman works with a variety of both farm and ranch activities. Learn more here: www.handsfreefarm.com/wheelman-60-day-guarantee-lp

[@fynbo1007]

Very beautiful tractor, love your drone pictures. Thank you for sharing your amazing story. God bless you and your family

[@davidwhisnant3230]

I am glad you young man can run that new thing I am old school no cab and can drive on tractor

[@mikeysgarage3697]

Hope you checked the bolts on the other gearboxes too. If they shake loose again I'd replace them, and put some Nord-lock washers on too.

[@ThatBaggedWK2]

Something about mowing is just so satisfying.. and that autodrive feature is so cool! Man I wish I could get involved on the farming life.. it’s just the issue of nothing big being around here in Ohio.

[@eddeetz493]

One day a chipping manufacturer will send a demo unit to clear the brush, trees and make deep bedding for the cattle. Add corn and a few pigs will turn the compost pile for you and your gardens will explode. Great video. Smart manufacturers are using hands on marketing to there advantage. That mower is a beast. Rhino ag has moved units with the demo for sure.

[@credixon8203]

AKA KREE. THE WHEELMAN FLEX ETC. IS VERY HANDY. THANKS FOR YOUR STEP BY STEP INSTRUCTIONS RYAN. THANKS AGAIN 2019 BLESSINGS

[@fatusbloke]

'Nothing kills a Deere like a Magnum'

[@carterk116]

fatusbloke haha but no

[@cherbert359]

so true

[@noahranker4133]

Nothing stands out to a repair truck than a red pice of shit

[@traviskleinsasser1144]

@@noahranker4133 don't see a repair truck there! 😴

[@noahranker4133]

travis kleinsasser you are an idiot

[@oldtimeengineer26]

Those cows are loving you for doing that mowing. Happy Cows

[@mikeywilt8573]

Zach “What the heck is that thing” Ryan and Nick “it’s my space ship”.

[@peterkirwan3337]

Thank you for video.after a 12 hour shift you and rocket are my go too guys to relax.wife thinks I am mad as have no farming connections but love your videos🇮🇪

[@kenstickney8678]

Is mowing your pastures a yearly chore? How does this help the cows? Don’t they eat most of the growth or are you cutting back weeds?

[@lidsman2221]

I'd like to see a lot more mowing. Thanks so much for the video.

[@BWYinYang]

What?! Don't want to see Haying? Harvesting? 😎

[@lidsman2221]

@@BWYinYang I like that also but don't get to see mowing very much. Thanks for your comment.

[@davidmicalizio824]

Beautiful area! Where are you located?

[@rand0mghost928]

Just need a brush mower for the jcb and then the pastures will look nice and clean

[@michaelhintz6187]

To answer to your question, have you ever seen a CASE do a wheely? Yes I have. When I was young my dad took me on his delivery route in Racine. We would deliver to the CASE plant on Lake Michigan. The lot driver would transfer tractors on the plant and he would drop the clutch doing a wheely across the plant with a new tractor in tow. 1970s. Good times.

[@herpnderpn2484]

I've have an old IH I could pick the front up with a finger. Granted there were quite a few cross ties on the back at the time. Held a wheelie for about 700 feet till I needed to turn.

[@abkjeldsen1949]

Why you don't guys prepare those fields to grow hay? Amazing video, really love what you do in your farm!!!

[@ginggur17]

You do make it all look easy pal. Another job well done.

[@watermanone7567]

That is a great tractor, JD used to be really good, but the new ones are trouble with computer issues and other mechanical failures. Thanks for the video's.

[@lukestrawwalker]

Yeah so are these... LOL:) OL J R :)

[@jaredjohnston9549]

I have always loved mowing with a rotary mower.

[@kadelbachorganicfarms]

Thanks for sharing the info on the Wheelman! Great to watch the Magnum too.

[@jacmccauley7581]

Rocket must have gotten you good today. No hat.

[@samellis4054]

So beautiful brings a tear to my eye

[@IHVA-ir9gp]

What did you think of the Case in what appeared to be some pretty hilly mowing. I admit I'm envious. Always enjoyed days mowing pasture because you cn always look back and see what you accomplished. Nice video

[@MichaelSmith-gh8np]

Hey on your throttle these two orange buttons and that button in the back you can put the treasure in forward or reverse not even touching the thing on the steering wheel

[@stanhensley3082]

You can tell how old I am when I sat “That was cool 😎 “.Thanks.

[@cdarting91]

Do you still have that Rhino mower that sticks out to the side from the 3-point-hitch? Like for doing roadside mowing or keeping the tire out of the thorns?

[@bobcrone6151]

“Japanese car coming through!” 🤣

[@chevyon37s]

Cooper Walton thanks for announcing yourself

[@trevorpeterson4042]

Bob Crone that Japanese car is always there to pull your Green peace’s or shit

[@NickAlexSR]

@@chevyon37s Lol, nailed it!

[@trossponsor9077]

@@chevyon37s Them retards should be killed at birth

[@bobcrone6151]

Trevor Peterson Hey bro. He was referring to the sound of the horn...but My bad. I’m sorry I offended you. Actually ya know what? No I’m not. Blow me.

[@ginggur17]

Is it not a lot of work installing the steering aid when ya not keeping the tractor?

[@danfinley3690]

Thanks for the mowing day pastures look nice

[@AndrooH]

damn bolts! I got sick of them coming loose on machinery, Loctite is now my best friend :)

[@CGW116A]

Ryan... I dont think I noticed any lock washers on the gear boxes on the mower. If not... get some or double nut. Lock washers usually the best.

[@clinthochrein888]

Outstanding! I loved seeing red tractors in the field 🤙🏽😁

[@chasesblog]

Just had this thought; have y’all ever thought about or might put the wheelman on the 8235r?

[@ginggur17]

Here kitty kitty. You do make me smile. To ‘cap’ it off, ya didn’t get sprayed.

[@augustreil]

Might be a good idea to wash the top of that battery as dirt all across it when it gets wet, can create a draw and kill the battery. Rocket is one cool Pup !

[@farmergavin8901]

I'm loving the Case IH vids please do more cause i'm a Case fan.

[@FoolOfATuque]

Oh bless your heart...Lol!

[@lucasfarms3456]

Fun fact there are only two Case IH Magnum plants in the world one in Brazil (producing only ~500 tractors a year) and one in Racine Wisconsin, where Ryan and I are from (Just Wisconsin). I toured the factory recently and it was amazing

[@Spartan-kq9fj]

Awesome video Ryan glad to finally see you test out a case what did you think of the tractor and would there be a possibility of you trying one out to use for pulling the grain cart this fall?

[@richardpoe2461]

Sure would be great to have that tractor at harvest time. Would be great for pulling the grain cart or to shuttle the wagons. Or to get some tillage work done.

[@caseihboy83]

Keep that Case it will look really good on your farm

[@simonschardax3604]

You changed it from the magnum to the magnum or why is the 7600 in the background when you reinstalled it? 😂😂

[@playmotogaming]

Simon Schardax yeah you noticed that new gearlever on the steering column in the “7600” to? 😂😉🤣. Vid editing mistake mr.Kuster😎?

[@shawnwood5075]

Ryan what farm apps do you use.Im on the fence trying figure out what I need.Im kinda hoping for a one does it all type.Any input would be appreciated. Thanks in advance.

[@MACE1-1]

Cool video, enjoyed it and probably had the same feeling in the stomach you did when you realized you were in the mud hole. Been there done that...!

[@ultralighter1]

Do you have to reprogram it when moved from one tractor to the other?

[@HowFarmsWork]

It saves your calibrations so you just select the tractor and implement in the app that you previously set up and it remembers everything

[@rogerwilson9892]

Well that would be nice the wheelman set up when cutting hay field of bush hogging a pasture very nice video.

[@wheelmanautosteering3154]

Hi Roger - take a closer look at Wheelman www.handsfreefarm.com/watchwheelman let us know if you have any questions!

[@kc0lze]

Does the trails from one tractor come over to the new tractor, i.e., if you create trails while on one tractor and then you go to another tractor, do you have to redo the trails?

[@lukestrawwalker]

The "trails" (A-B lines in the guidance system I assume you mean) are established by the unit based on its position and calculated from pre-programmed variables like the tractor measurements he made in the video and programmed in, plus the operating width of the implement in the field which is programmed in before starting. Once these inputs are programmed in, you can select from a menu when switching from one tractor to another or back again. Once you get the tractor to the starting position, assuming you always start from the same position, and set the same A+ guidance heading, then theoretically it SHOULD follow the same path regardless of which tractor is doing the work, assuming the implement width is the same. I presume your question is basically "will it do tramlines" like for spraying wheat or something like that?? Of course a much shorter or longer tractor with different measurements using the same implement *might not* have the tractor tires following the same tracks, even with the same implement. As for the "trails" (assume you mean the guidance lines) the GPS system detects its location and then uses the parameters programmed in for that tractor and implement to calculate the A-B lines for the next pass automatically every time it goes to the field... Later! OL J R: )

[@ginggur17]

Hello Ryan. The Case tyres don’t look as aggressive as the one on your own tractors. They don’t seem to be as deep ridges.

[@lukestrawwalker]

They're probably worn some look to be Firestone 23degree tires... they look less aggressive anyway. Later! OL J R :)

[@boerbrabant]

Was that a production fault on that new rhino mower or are you suposed to check them after X hours?

[@danfinley3690]

Great drone footage as well

[@kimberlygreen6715]

Great video Ryan I been waiting for 3 days finnaly it's here have a good rest of your week

[@peanutsmith1462]

Dude you killed me with that here kitty kitty

[@kodabear_46]

Love mowing videos, that combo looks good together. One day I'll own a bunch of land to where I can just mow whenever I want.

[@HM-0410]

With using the Wheelman did it cut down on your operating time? If so about how much time do you think it saved you? What things do you like better the Wheelman or the AutoSteer? Do you think that you will be installing the Wheelman on all of your tractors or will you just keep it on the 7600? I like how informative you videos are and how you always keep an open mind to trying something new. With the way things are going I would imagine that you have to keep an open mind and try things to keep an edge. Please keep the videos coming and may God Bless you and your family.

[@wheelmanautosteering3154]

Hi David, if you would like to learn more about Wheelman, come visit our website: www.handsfreefarm.com/ or to watch more videos: www.handsfreefarm.com/watchwheelman and let us know if you have any questions.

[@MrSnyper360]

Does the Wheelman Flex system need to be recalibrated everytime it is moved from tractor to tractor or can you save tractor settings? When dealing with implements what measurements are required? Can implements be saved as well?

[@wheelman9]

After first calibration the wheelman does not need to be calibrated. The app saves your settings and needs to be selected if moving from tractor to tractor. Implement width and hitch length are the 2 values needed to be added to the profile and can be saved.

[@ConeMakerDude2020]

You look good sitting in a red machine better than a green one😁

[@gerryvanwoerkom7241]

does the Wheelman recognize or remember which tractor it is installed in every time you swap tractors .. or do you have to input all the dimensions again ???

[@BWYinYang]

Yeah, Ryan didn't mention about Wheelman tractor memory selection(s)? I assume its on his phone.

[@wheelman9]

The Whirl app allows you to select your calibrated profiles when you switch the Flex between machines.

[@ollie-lk5dx]

What is the plus minis accuracy supposed to be I assume your using wass Will you put in combine for harvest seems like it's fairly simple to install.

[@wheelman9]

With WAAS the accuracy is 4-6 inches crosstrack.

[@gib815]

For using A+Heading, I just use degrees off of 90 deg and 180 deg, like 87 deg or 177 deg. Makes it easier just using the 90 and 180, because they just the opposite of the 270 and 360.. get it ? less numbers to be thinking about..

[@samson1200]

Hmm.. would it help to lower the weed seed propagation if you raked all the grass up and burned it to kill the seeds so next year the weeds will be much less.

[@lukestrawwalker]

Not really by the time the shredder pulverizes it any seeds have already been knocked off... Later! OL J R :)

[@chevyon37s]

... that seat squeak would drive me nuts!

[@ronspruill5112]

It is what it is !

[@rustyrelicsfarm2406]

So how do you like Red Power now?

[@stanleyjohnston5876]

I figured that the newer tractors had a guidance system would be factory installed.

[@michaelc9128]

Yes, one would think, each machine is $100 grand plus. So should have every option available

[@noahranker4133]

This is not a newer tractor

[@lukestrawwalker]

Most of them have most of the "hardware" installed (mounting equipment, wiring to support it) but you have to PAY for the system and of course the subscription/fees to access the system. It's all about the money don't ya know... LOL:) OL J R :)

[@s.pursell8901]

Slightly was surprised not to see your cows running back in to eat the fresh cut grass.

[@connorwalters490]

I'm curious to learn more about this wheelman I've never heard of it

[@wheelmanautosteering3154]

Hi Connor! Let us know if you have any specific questions. Here is a link to our website:www.handsfreefarm.com/ and here is a link to watch some more videos: www.handsfreefarm.com/watchwheelman

[@wheelmanautosteering3154]

We also have a 60-Day guarantee that expires soon. Take a look! www.handsfreefarm.com/wheelman-60-day-guarantee-lp

[@Dale.Nienow]

You should get a wheelman for the combine!

[@Northern_Farmer]

Any word when they will be available in Canada

[@grantfort8852]

Informed about the wheel man thanks for the drone shots

[@joshuatoro8977]

how many acres do you guys farm ? and can you do a video on all the farm implements that you guys use ? Love the tractor!

[@Michael-fd8ob]

There more scared of you. As long as you don't scare them you will be fine Ryan. Hope you have fixed that wash out by now. Like that case. It looks easy.

[@buck5637]

Beautiful tractor

[@nathanvanfossen1391]

Would you ever buy a case for tillage?

[@justinsnyder711]

That case looks good on y'all place.

[@ihus9950]

Awesome, thanks for sharing, so what are your thoughts on the CaseIH 👍

[@freightshaker5897]

No hate here but when you timed your self switching the wheelman from the 210 to the 7600, you were putting it back into the 210 and not the 7600 when you stopped your timer. Just wonder what your reasoning was behind it. and who knows maybe I misunderstood you.

[@vincevincethedairyfarmer6410]

Does the radio pick stuff up good my 986 dont even tho it's an OLD tractor

[@14Marathons]

Great video, Ryan....as always...

[@meloregabriel9387]

Greetings from Romania!!!

[@garymaris9471]

Mr. Skunkie can sure command his space!, and our attention instantly! You made me laugh with that one, I got them here to... "Gary in Oregon "

[@mikejoyce3782]

Did I miss your story of why you have a red machine? Is this temp or permanent?

[@huntersatterfield6656]

Mike Joyce it’s temporary

[@bzs187]

Previous video, but sort, it's like a demo for the wheelman if I remember right.

[@leol1682]

Like the video Ryan and love how you xplane Wheelman Flex .have great day .God Bless.

[@kellykonoske91]

Need some never seize and lock washers on the mower. Todd the retired trucker

[@demoman1282]

14:07 the face of pure fear

[@MatthewHoag77]

Bit by bit, pass by pass, the pastures are really shaping up on Kuster Farms. I can see how this type of back-and-forth cutting is better as a follow-up after all the backing into brush and trees that you've done over the last few years. Hopefully, it makes it easier to find the cattle and also for them to get more grass in their rumens.

[@Gamebreaker08]

I don’t even get notifications about your videos anymore

[@armadillerff]

Don’t feel bad about the horn. The ‘city horn’ on the biggest Army trucks sounds the same lol

[@mcleanfarmsryan3897]

Do you think I could put one on my John Deere 4020

[@donald1056]

You know you want it just might as well buy this Case

[@claytonbudenbender7497]

Which do u like better case or John deer

[@masonruss6320]

Good job how are you liking the case

[@aaronbrenneman1513]

I can see trying that auto steer but it kinda takes the fun out of driving. Still a good video.

[@rylex6956]

Well when you drive all day long its gets really tedious and even painful

[@rylex6956]

@G Manloh yeah well my dad has been doin it for 40 years and he had to get surgery on his shoulder because of it...

[@rylex6956]

@G Manloh yeah I see where you're comin from

[@plainviewfarms6364]

I wanna get the wheelman for my lawnmower

[@Shredxcam22]

I was thinking that same thing. Would be nice on my tractor with my finish mower

[@seekerfarms1169]

Gonna cost you about $4000

[@plainviewfarms6364]

Be worth it

[@jeffhoman767]

Is it accurate enough you could plant with it ?

[@wheelman9]

With the 4-6 inch accuracy of WAAS there are many types of planting that can be performed with this unit.

[@trentenfarmer4878]

My dad has the same tractor and I would use it to mow but we not had rain in a bout 2 weeks so it really drive and our yard dieing

[@jankotze1959]

I guess the Wheelman will follow curves as well or is it only for straight lines

[@wheelman9]

It has the option for AB, A+ heading and Curvature

[@jankotze1959]

@@wheelman9 awesome thank You

[@bobcrone6151]

On the compass headings, I guess the Wheelman “knows where it is” once it’s “found the birds” and automatically accounts for magnetic deviation? Or do you have to manually enter it in a dialog on the App... for instance just in the state of WI, I think the deviation (from mag to true north varies from about -4 degrees to +2) depending on your exact location. Not sure how that works on Ag-based GPS technology...?...

[@wheelman9]

It all happens automatically in the background.

[@jmcagri4922]

What was your first camera you started with and what editing software?

[@shellybergin2187]

You should get a truckers knob for your tractors

[@Archosphere]

really impressed with how you get your phone screen in the video. wish I knew how you do that.