HOWTO | Install CIB Slide Blocks on Moxi Lollys

[@PaigeLovesYou88]

Thank you so much for posting this! Very helpful :)

[@r-o-r293]

How you like the fundaes vs the jellies? Also what wheel you use for certain surface?

[@izzbizz1102]

Hey, i know you posted this a year ago, but im looking into getting a slide block but when I went to order, they had different sizes? i have a size 8 moxi panther and i was wondering if you would know what size i should get?

[@quit1029]

it depends on the size of the space between your kingpins.

[@mourningclouds]

Have a size 6 lolly with a size 4 plate what size bone sliders would I need ?

[@elisawagner6801]

I have the same and I ordered a medium but it ended up being too big so I would say a small

[@bobbi5444]

I have moxi lolly size 8. On the bottom it says size 6 plate. So you know what size cib blocks I need to get? Please.

[@SKTSHT]

Oh perfect, we’re the same size! I double checked the CIB chart to be sure, but size 6 plate for Moxi Lolly Thrust plate would be a large block. I also have a large block on size 8 Lollys and they fit perfectly fine. Hope that helps! ✌🏽

[@mayaspotter]

i have a question for the very first part where I have to put the block together with the adapter. Doed it have to be tight?? because at some point the bolt stops going deeper into the mother and it a little loose. Sorry if I made any mistakes. I hope you still can understand me.pls send help

[@SKTSHT]

Hey there! It can definitely be tricky making sure everything fits properly, but that's okay. We just try to figure it out lol. For the block and adapter, you want that to be tight so it doesn't move. Otherwise that will be no good for when you use them. I would double check that you aren't missing any pieces, like the washers, and that your bolts aren't worn down.

[@Katewilson7117]

can you use a crab tool for this i havent got a y tool

[@SKTSHT]

Hey there! Late response, but I wanted to try this myself before responding. You can also use a crab tool to tighten block to your kingpins.

[@radmilaradovic9206]

i have sunlite plates size 3, and i got cib blocks in small. they dont fit as they're supposed to and im afraid i got the wrong size of blocks

[@SKTSHT]

Aww noo :( I saw that the sublime plates and cib blocks aren’t naturally compatible with each other. There have been some skaters who were able to modify their cib blocks to fit sunlite plates, but it’ll take some extra work. I hope you’re able to find a solution that works for you!

[@Torbeekat]

I have size 8 moxi panthers. I have not been able to find anywhere which size cib block for them! Please help!

[@SKTSHT]

Hi! If you know the plate size, the CIB size chart will let you know. The panthers have the Powerdyne Marvel plate, so if you go to the chart you’ll want to search for that one. They’re the same plates as the beach bunnies. If your plate says 650 on the bottom, you’d want a size large…if 600 then a medium. I’m pulling this info from their chart so I hope that helps!

[@uhhhhh8717]

Thank you so much!!!!!!!

[@SKTSHT]

Happy to help! :)

[@koriharlan5181]

😱 Did you make that practice rail yourself?!

[@SKTSHT]

Yes! I found some instructions online and it was really easy to put together from there :)

[@koriharlan5181]

@@SKTSHT that’s badass!

[@bowling_with_yarn]

Yay! Thank you!