How to Replace Valve Cover Gaskets on a 2005 Mercedes C240

[@sl500diy6]

Awesome you showed how to replace the hoses. Great job. Thank you.

[@robertschell8410]

Thanks I'm in the middle of doing this and plugs on a 98 E320. Good to see this and some tips.

[@raterNAZ]

I have a small leak on the passenger side cover was waiting for the weather to get better (NYC) before i tackle it, this video has been very helpful... Thanks!

[@HowtoAutomotive]

nAz glad the video helped. Hope the weather gets better soon. Thank you for watching!

[@abrahamsagrero8623]

Brother, God bless you.. thanks for sharing a little bit of your knowledge..

[@HowtoAutomotive]

Thank you for watching!

[@bonfied777]

Looks similar to my 05 c320 sport..Thank you for the video you made look easy..

[@HowtoAutomotive]

bona-fide777 glad to help . Thank you for watching

[@robinwadhwani8684]

Thanks for this great video. Very detailed and clear. How long does take to do the full job start to finish?

[@HowtoAutomotive]

It’s gonna take you three or four hours to do this. Thank you for watching!

[@Usmanthemecano]

Easy job! Guy I used to work for had a collection of valve covers already cleaned and resealed. The swap was done very quickly. I don't see where you showed to unbolt the dip stick tube and bend it away from the cover...

[@Bear_83]

Nice Video. Mine C240 has the dip tube on front side passenger.

[@acesmoka]

how long did this job take? great job by the way

[@Bri11ante]

Are these the exact same procedures for 2004 w209(Cabrio) chassis?

[@anthonywhite-df1uq]

We appreciate this bro

[@Evileastside]

Appreciate it my boy fr🏎️

[@henrylee2964]

What's the recommended torque values for the valve cover bolts on the passenger side?

[@luisumgomez]

12 nm on the first pass then an extra 90° turn on the second pass

[@ginokappadonna]

Great content 👌

[@youandiryan]

Great video man

[@42WallabyWaySydney]

Awesome video but I winced every time the mating surface scraped the concrete lol

[@joshuajemueljones841]

Thanks bro super detailed video perfect 👍 you are appreciated

[@HowtoAutomotive]

Thank you and thank you for watching!

[@yungjust6090]

my car is running hot and i notice oil coming from the top of the gasket where the silicone goes. can this cause your car to over heat with out a check engine light coming on . it only said check antifreeze but went right away and the antifreeze is full

[@Omar_Gorney]

it really helps . thanx for this video .

[@HowtoAutomotive]

Thank you!

[@Testimonies-f2c]

GREAT WORK!

[@HowtoAutomotive]

Thank you!

[@nedoscarsandfishingvideos5500]

I am going to do it on mine tomorrow good video thanks

[@ICEFOOL]

important question. I replaced 4 breather hoses on my 2002 c240 and the one hose in the back driver's side part of the engine had 3 ports. 1 on each end and 1 sticking out of the side of the hose. the part number on the old hose is A 112 018 0682 the new hose I got in the mail only had 2 ports, one on each end. the part number on the new hose is a 112 018 0482. I'm wondering if that part has been revised to where I just plug the nipple that goes into the 3rd port on the old hose and just slap in the new one.

[@HowtoAutomotive]

ICEFOOL as far as I know that hose has not been updated. Sounds like you may have the wrong part.

[@ICEFOOL]

How to Automotive Maybe. I just don't understand how both of the hoses are compatible with the c240's from 01-05. they are the same length and how it curves. It's just the original hose has 1 extra port.

[@19MiLLz92]

Are all these parts the same for a 2006 Mercedes Benz c230?

[@colinaglae2605]

Always a pleasure watching you videos. Its such a great help to DIY guys like me. Would you be kind enough to advise me on how to replace the Camshaft plug cover caps on a 320cdi, V6 which r placed on the front sides ! I have seen you do it on the petrol version which r on the rear. Also tool to use.Its a OM642 engine !!s

[@hard_money02]

Thanks man much appreciated!!

[@HowtoAutomotive]

Alex Allen thank you for watching!!

[@UneakDesign]

Awesome video, I'll do mine next weekend! I'll oder all the parts on your affiliate link (wish you just had a bundle of them all together). Do you recommend a place I can drop pf my valve covers to have them cleaned (mine are filthy)?

[@NazifNB]

Very good video.keep it up.

[@HowtoAutomotive]

NAZ BESIMI thank you and thank you for watching!

[@irszgatti]

Well done. I'd imagine collapsed PCV system hoses contribute to oil consumption in these engines

[@rosales75904]

Do any of the lines you disconnected have to do with ac vents opening or closing in dash?

[@HowtoAutomotive]

rosales75904 no nothing to do with ac or the vents.

[@jesseymitchell1359]

Do I have to replace the hoses if they're good?

[@HowtoAutomotive]

No if they are in good shape run with them.

[@jasonhorst5490]

Nice video. What’s the torque setting for the valve covers?

[@davidboy2015]

Jason Horst did you ever find it?

[@loudmouth216]

Thanks for the video very helpful

[@ICEFOOL]

hey, the mass air flow sensor bracket on my 02 c240 mercedes is broke and i've looked everywhere on the internet for a new or atleast a used one and can't find nothing. do you have any ideas where i could get one?

[@HowtoAutomotive]

ICEFOOL this may be one of those parts you have to go to the dealer for.

[@sl5311]

Anyone know the fuel line bolt torque spec?

[@omarkrichati6977]

What’s the torque spec?

[@SteveRobReviews]

Well done. Cheers

[@lizsantiago6040]

Can you do this to mine ??? Oil leaks like crazy

[@HowtoAutomotive]

lis santiago if you live in the Encinitas California area I could definitely help you.

[@lizsantiago6040]

How to Automotive how can i get in contact with you?

[@HowtoAutomotive]

lis santiago you can email me at [e-mail] and I’ll send you the shop info.

[@vladnechitaylo4311]

Super

[@PrinceSmithActor]

If anyone can do this in NC .. I will pay you

[@randytyson755]

I am confused...what happened to changing the gasket!

[@maksn5751]

good stuff. Seemed like a bit much gasket maker, no?

[@HowtoAutomotive]

Max N it is a lot of work. Thank you for watching!

[@soundog80]

No torque specs

[@TheGomez528]

70NM.

[@MissionaryForMexico]

to fast of camera movement.

[@nydrell1969]

Wash the motor down next time

[@alikariem592]

Do these have oil dipstick, or is that red one in the back next to throttle body transmission fill whole