Also align the clamp back to the impression on the hose.
@yzfffooo Жыл бұрын
Fuck yeah. This is a very helpful trick. I always squeeze and release until it pops back.
@nsxt290 Жыл бұрын
I'm embarrassed bc i did those things as it didn't release until it just released. Thank you for the screwdriver tip
@HowtoAutomotive Жыл бұрын
Thank you for watching!
@itmakesyouthink Жыл бұрын
I love great industrial design.
@calebmccumber6084 Жыл бұрын
I discovered this while the clamp was in my hand. Not on a hose to restrict it's rebound. That spring tension busted my fingertip wide open lol. I had just started liking those clamps too.
@HowtoAutomotive Жыл бұрын
Ouch I bet that hurt
@titan9m Жыл бұрын
Thank you, had this same problem yesterday. This helped a lot.
@tomthompson7400 Жыл бұрын
keep your fingers out of the way , as the big ones bite.
@HowtoAutomotive Жыл бұрын
Ask me how I know 🤓
@michaelvinson-uz2ze2 ай бұрын
thank you. gotta learn somehow.. ty for the tip
@BenVallack9 ай бұрын
None of the ones I’ve seen have a way to lock them open!
@Joe..3.8.0.9_ Жыл бұрын
Thanks
@TheoatStudio10 ай бұрын
this is amazing tip than trying to return the lock with squeezing. Thanks.
@jimpie231 Жыл бұрын
Thank-you!
@bigrockinu Жыл бұрын
Thanks🎉
@clariteatv889 ай бұрын
This was so helpful. Thanks for posting. I was so frustrated I had to come look it up and found this, think I'll give it another go in the morning🥰🫡
@lowridingtrucks88 Жыл бұрын
Where do you buy replacements
@magnum_dingus Жыл бұрын
Hose clamp pliers aren't that expensive.
@51-FS Жыл бұрын
But they don't help with releasing the clamp....
@51-FS Жыл бұрын
Twist the screw driver.... twist
@bendepeel7846 Жыл бұрын
Cut off junk factory clamp put real hose clamp on
@rupe53 Жыл бұрын
the worm drive clamps will damage plastic radiator fittings, which is why they use these to maintain constant tension.
@bendepeel7846 Жыл бұрын
I've never had a problem with them so I don't really give a s***
@davycrockett43959 ай бұрын
I've never had a problem with them either just don't over tighten
@daveyt4802 Жыл бұрын
Worm drive old skools damage the hose, hence this new style.
@rupe53 Жыл бұрын
the worm drive clamps will damage plastic radiator fittings, which is why they use these to maintain constant tension.
@davycrockett43959 ай бұрын
These clamps dig into the hose until they leak. My experience is these are the worst clamps I've ever used
@lorenmadrid4598 Жыл бұрын
Pro tip... use the proper damn tools in the first place or don't do the job!
@brarautorepairs Жыл бұрын
No, you don't need a special tool for everything. This is not a profitable way to run a business. You buy what you need and as you get more work, you slowly add more tools to help save you time.
@romeothompson9389 Жыл бұрын
So admit that you have no common sense and ingenuity skills ? Not worth much if you can’t figure out stuff if the tools/situations are not 100% ideal
@51-FS Жыл бұрын
Whats the tool? I been looking for the right way to do this.
@51-FS Жыл бұрын
@romeothompson9389 commonsense ain't verry common any more
@flaman2011 Жыл бұрын
Spring clamps and that's obviously an American vehicle clamp. Imports really don't have that
@Khanbrand45511 ай бұрын
Lahore my jis ko clamp chahe hoo wo rapta Kary hose clamp ss. All size.
@andybenfield79 Жыл бұрын
67 years old and a ex mechanic. I never knew this. 😂😂