How to Reset the Service A and B Light on a 2008- 2011 Mercedes C 300

Brian Eslick from How to Automotive www.howtoautomotive.com takes you step-by-step through the process of resetting the service A and B light on a 2008-2011 Mercedes C 300.
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomotive.com/
Stay connected at:
Email: [e-mail]
Facebook: / how-to- Automotive-432536836946801/?ref=settings
Google+: plus.google.com/+HowtoAutomot...
LinkedIn: / brian-esl. . 819839118
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick

[@HowtoAutomotive]

For those of you that have asked how they can tip me. You can now click the “super thanks” button and add a tip. Grateful for all my viewers and subscribers! This channel would be nothing without you.!

[@luckeyboytvonline4560]

If it doesn’t work when pushing both buttons at the same time… push the call button first and immediately press the ok button quickly and hold them both.💯💯💯

[@nicholepomare2419]

Thanks bro I watched this clip 10 x before I saw your comment champ

[@jasonmoriset9292]

One important step that was missed in this video is to close your door. Nothing happens till that happens.

[@captainvenom4377]

Thank you so much ive been trying this for 20 minutes with my door open

[@76vetten]

Good tip. Thanks.

[@jhc6330]

Thanks Brohim!!

[@markkillen1685]

HOLY CRAP!!! I spent 30 mins with the door open getting nowhere!!! Thanks Jason

[@carrollrichardssr.9842]

Absolutely that's why I had to watch five times !

[@johnjkizer6399]

Thank you so much Brian for your service everything worked out great have a wonderful day and God bless you

[@carrollrichardssr.9842]

Had to watch 5 times but finally got it - thank you very much for ur instruction !

[@frankensteinlabs]

It worked perfect. selecting both buttons simultaneously is critical.

[@TheWrestleDaily]

Great video! Straight to the point. Thank you!

[@noahlail4018]

Doing the sevices myself and havent turned the indicators off... the b service says it's literally 51 thousand miles overdue. Thanks for this video

[@philipwynn8306]

You are wonderful... thank you very much! Worked great! Very much appreciated!!!

[@mygodisable2]

Good video, quick and to the point. Thanks.

[@HowtoAutomotive]

Thank you for watching!

[@myke9896]

Hit the call but a split second before hitting the ok button, I was having issues until I did that and it worked right away

[@ebaxter7]

100% bro thanks!!! Tried many times till i did this!!

[@brianlachance6453]

Works 100 percent thanks from one Brian to another

[@couchmayne4351]

Thank you for the video straight to the point

[@southerngirlchef5886]

Oh, my thank you so much!! It worked!!! I went to get an oil change, which they didn’t reset it afterwards. ❤

[@jnorward]

Perfect explanation. Thank you!

[@Mrfearknowone]

Straight to the point.. Thank you

[@HowtoAutomotive]

Mrfearknowone thank you and thank you for watching!

[@dalyshow01]

Appreciate you showing me this!

[@champtouch3298]

Excellent job buddy I never would’ve known that I’ve been looking for that for so long thank you!!

[@michealoprogress3787]

Now I’m happy.. thank you 🙌

[@mikefatah]

Worked perfectly. Thank you!

[@musicmasters642]

Good video, thank you very much

[@mishalarsen9736]

FYI the door has to be closed for it to work on a 2008. Thanks!

[@iki911]

Yes. Close the door. I been at for a minute till I read this comment. Thanks 2011

[@danasophia376]

Thank you so much !!!🤗

[@mzanointedshanklin6003]

Thanks Brian!!!

[@poohvan3269]

Very helpful thanks man

[@bolonymontana]

Very very helpful thank you so much

[@rolannandlal4369]

Thank you for this video

[@TheJetty2007]

Perfect instructor

[@javiercarrillo5015]

thanks man.very good explanation! 👏

[@HowtoAutomotive]

Thank you for watching!

[@marquiscurrie7262]

Thanks alot it definitely helped me out really appreciate it

[@HowtoAutomotive]

Thank you for watching!

[@JAY-Z1996]

This also works for 2012 Mercedes E350. Thank you 🙏🏼

[@Justkeepdriving196]

Thank you for this

[@chrisllanas8088]

I love you Brian

[@MatthewGamers1]

Great video just helped me out

[@HowtoAutomotive]

joncjh28 glad the video was helpful. Thank you for watching!

[@UmarShafaq]

Thank you worked well for my Merc C Class 2007

[@HowtoAutomotive]

@@UmarShafaq glad it worked. Thanks for watching!

[@rondellprochet7231]

Thank yu I definitely got it worrd!!

[@Jmamelia]

Thank you so much!

[@mygodisable2]

Hi, Brian is there a way to program another key and key fob remote on my own?

[@rochellestrong3824]

😅😅I figured it out.. thank you sooo much..

[@pamelaphillips343]

Thank you!!!

[@acbeats5022]

thank you so much bro

[@javiercarrillo5015]

este es el mejor video tutorial que eh visto..muchaas Amigo Brian!..best wishes for you!.

[@ThegreatBoso]

Thank you so much

[@latrosshuff5463]

Thanks bro... That was a big help!!

[@jameswaugh115]

Thz ill give it a try...is it the same on 08

[@caliresan9532]

Good job 👏🏽

[@HowtoAutomotive]

Thank you!

[@1b9e7n3z]

Very thanks, regards

[@donshin9276]

thank you!

[@georgegleek]

Genius. Thanks

[@HowtoAutomotive]

Lol. Thank you and thank you for watching!

[@shark70007000]

Is there a way to do this on a 2008 clk350? My steering wheel doesn't have that setup. It has up and diwn and pages right and left pages. The other side has - + and ohine answer and hang up. I think I did this with my Autel scanner last time. I was hoping I could do it without it, though.

[@Poiuy04]

Thank you sir!

[@HowtoAutomotive]

Thank you for watching!

[@biomedical-qv5li]

Thanks bro

[@joestrickland8038]

Lifesaver

[@user-iw1vk6zx3i]

It was excellent

[@HowtoAutomotive]

Thank you!

[@ganeshramjan3739]

Thank you bro

[@HowtoAutomotive]

Thank you for watching!

[@mohammadlahrodi8296]

Thank you sit

[@HowtoAutomotive]

Thank you for watching!

[@f50tocayo46]

How do you do it for the break pad wear one

[@TontosVotanPaSocialistas]

It does work with my CDI 320 2007

[@Ajmalpms]

Thank you

[@HowtoAutomotive]

Thank you for watching!

[@chapintrucho716]

thank you

[@HowtoAutomotive]

Thank you for watching!

[@VIPEntertainmentClothing]

Thanks buddy

[@HowtoAutomotive]

Thank you for watching!

[@jimmycanales7189]

I have a 2011 Mercedes Benz E350 when I follow these steps for some reason it just tells me if I want to reset the trip odometer. That menu for some reason doesn't come up, any help with that?

[@phatboyzsmokehouse1179]

Same here

[@eligioanderson6166]

Same here

[@Peterchungsukkim]

Try to press CALL button first then press OK button(while CALL button is being pressed).

[@user-zd6rk3qp7h]

Verkar good !

[@kevinhaslam6346]

When I follow your instructions, I hold call/ok and what pops up is it asks if I want to reset

[@goldrino13]

What if the right side of my steering weel butons dont work?

[@lifesahobby]

that it cheers

[@Unojoservir]

Any idea why this absolutely does not work on my car?

[@GetYourLife24]

Thanks. Now I feel like a mechanic

[@ghostwriter099b4]

does this work for a c300 2008?

[@itskeewi3537]

yessir. dead ass had past over due for like 640 days

[@abdulalbaradei4597]

Hi, how do you reset brake pads warning light? Thanks

[@HowtoAutomotive]

On Mercedes they automatically reset unless there’s a problem with the sensor itself.

[@abdulalbaradei4597]

Thank you so much and you are right reset by itself.

[@TheForcesofDarkness]

Pressing the buttons at the same time didn't work for me. Needed to press the call button first, then the OK button and hold within a second. Then the menu is displayed.

[@rochellestrong3824]

thank you so much.will this work for 2009 c300

[@HowtoAutomotive]

I believe it’s the same.

[@rochellestrong3824]

@@HowtoAutomotive thank you so much for your videos,they are so helpful..

[@HowtoAutomotive]

@@rochellestrong3824 thank you for watching!

[@ThadmanKane]

Any manner of combinations of timing pressing the buttons never accesses the menu.

[@benjames7928]

Doesn’t work for me, all it does is give me the option to reset trip odometer, what am I doing wrong?

[@jerilynlowery4814]

My display never shows the full service button.

[@babyjes1000]

If you have a 2012, push the call button a second first and then both and hold it.

[@rbarpagga7402]

How can I reset my AC? My max cool dose not work anymore

[@ProCompSolutions]

Added note make sure you have the doors closed when you do this

[@swally3487]

yes i did

[@alanchumsawang236]

Just spent 10 minutes rewatching to find out all I had to do was close my doors🥴

[@LivieLiv723]

I’m so frustrated this is not working for my ML350 4 Matic 😫😖😫😖

[@JB73691]

So the car won't know the difference if you actually did the maintenance or not.

[@edwardruff7927]

Thank you! The nagware is naggy ugh

[@rochellestrong3824]

when i press the phone icon and the"ok" button at the same time.. reset trip odometer comes up..

[@HowtoAutomotive]

Try doing the phone button about a half a second prior to the other button and then hold

[@Sincity1427]

Mines won’t work when I double press the call and ok button

[@HowtoAutomotive]

Try pressing the call button first in the OK

[@kevinhaslam6346]

Trip odometer...

[@808celebrity]

It only says reset trip odometer

[@Rafa-ud2dw]

I hate that I still can’t do it 💀

[@duttyshutt6224]

Question question… I jus bought a C class 300 Mercedes Benz I have changed the oil filters etc but after a weak the Check engine light came back on I have cleared but after a few mileage the light appeared back on, no over heating no change in the engine performance what u think could be the problem…?? Love your videos..

[@mikedizzle5273]

Didn't work for me. Said something like unable to complete.

[@weareallanimals78]

This didn't work on my 2011 c300

[@vitisportsandlife]

I have 2011 c300, I am doing the same thing but nothing happens.

[@swally3487]

me too i follow ur steps did not respond do u think i am having prob;em with call button

[@Mrfearknowone]

@@swally3487 I pressed phone button a split second before ok button holding them both for about 4 seconds

[@ohCobrv]

Mrfearknowone doing what you did worked for me!

[@phatboyzsmokehouse1179]

I have a 2011. Don’t hold at the same time, press the call button a split second before you hit ok, but don’t let go of the call button

[@loveish8426]

Didn't work on a 2008 C300

[@billbog25]

Doesn't work. The reset odometer keeps coming up. Ugh

[@marlonmalaj8660]

Ho,how to cancel taxi from my mercedes e-class?

[@johnmeyers3899]

this isn't working for me i have a 2009 c300

[@Jasonshepard2]

⭐️⭐️⭐️⭐️⭐️👍

[@docheller59]

It doest work on a Bluetec.

[@daveycrockett9447]

How the hell do you hold both those buttons down on the opposite of thr steering wheel WHILE you turn the ignition key the first position- uggggh

[@ankygf]

Not work for me

[@alansaucedo6416]

Why does reseting it is like gta cheat code

[@user-hu5wb6rf1o]

? 뎃글봐도 영 문슨말이지 ㅜ ㅜ 결론은?