How to Set Up your Xfinity xFi Gateway Modem

This video will show you how to hook up and set up a new Xfinity xFi Gateway Modem (XB7), the 3rd generation of xFi Gateway Modems. It will also briefly go over how to set up the Xfinity app which you will use to initially setup your modem. However, this video will not go through the entire app setup process.

[@lorae7]

Thanks. There was ZERO instructions on the box so appreciate your easy to follow instructions

[@TishB21]

Thank you so much for this video cus waiting on hold to speak with a customer service rep for over a hr is ridiculous so thanks

[@iSlutCake_only2genders]

You can get a human on the phone? Your gifted

[@diormasters467]

Worst customer service they suck so much

[@BigDaddy52525]

Its all indians. What u expect

[@Mwolf-yw4hb]

Great job. Someone who can actually do a video

[@thindi31]

I hate them.. their customer service is so bad. I hate fighting with a bot for hours.

[@DanTheVan290]

Videos like these are why I appreciate the internet

[@lindamccorkle8883]

I watched several how-to videos on this subject, but still couldn’t work up the nerve to tackle switching my old modem to the Gateway one-until I watched this one. You did a fabulous job of explaining everything (Ethernet cables? What are those??🥴) clearly and understandably, all the way through to even locating the correct Xfinity app to download and use. I was successful on my first try. I can’t thank you enough!

[@mszafran51]

This is the BEST tutorial I have seen on setting up a modem. Very clear and concise and the explanations were easy to handle. I did this project in under 10 minutes because of your help! THANK YOU!!!!😀

[@jameskilrain38]

Yes,it also helped me.

[@sharigirardeau3367]

Okay, technologically challenged, here, but what is the other end of the ethernet cord attached to? I'm getting ulcers trying to set my new gateway up to my new smart tv! I've had my own modem and router for a few years, so this device that claims to be all that is confusing to me! Any help greatly appreciated, and I agree that so far this has been the most helpful video!

[@dianeparks504]

I wish I would have found this video first. You make it so simple, it took 2 hours to figure from the little info they sent me. thanks

[@dianecameron7145]

Thank you so much I'm a senior citizen and found a very confusing on how to set it up I have the setup part right but not to get the app thank you again for all your help it really did

[@loverofcalifornia3619]

This is wonderful! When I called to inquire about it, I told the lady I am not tech savy. She said something like, "no problem, it is easy, you just plug it in". But I hesitated and did not go ahead with the purchase. Well, needless to say, for someone like me it is not easy! Still not certain if I will get it, but if I do, this will help immensely.

[@sharon94503]

Quite literally, you do just it in and it pretty much sets itself up. All you need to do is provide a password. This is especially easy if you already have an xfinity gateway.

[@elnoraw5529]

Well this didn't help since you "replaced" a modem and not totally set it up from scratch

[@TheSteveanna]

Thank you SO MUCH for this video! I know how to set up a modem, but the xFinity app made it seem like I had to scan the barcode first. I had a devil of a time getting to the point where you can actually activate the modem. They made it so much harder than it had to be. And for anyone who is interested, yes, you can use your existing ethernet and coax cables. I wasn't sure, but I didn't want to have to re-string everything. If anyone knows if the new cables provided add to speed or quality, please let us know.

[@busbystandup1337]

I've paid for Xfinity internet for the past five years, I pay for 100mbps and it's never above 30mbps unless I call and complain, then it's around 100mbps for a day or 2, and back to 30. I've called about this no less than a dozen times over the past 2 years... and the last two times they scheduled a technician to come out where I had to be home for a 2-3 hour window, and both times the technician didn't show up, didn't call, didn't care. Comcast is the most awful atrocity of customer service on the planet. Last time I spoke with them, their suggestion was that I pay more for faster speeds and lock into a 3 year contract with them. Why would I pay for faster speeds when you only give me 33% of the speed I'm currently paying for?

[@jenniferlee7167]

They do this to customers all the time. They power down the speed. You have to call constantly to keep it where it belongs.

[@thedarkdade]

I've had Comcast Residential and Comcast Business. Both speeds I have never seen this happen. May wanna get a whole new line.

[@TrainEverMore]

@@thedarkdade it happens to every family member of mine. Comcast in notoriously terrible

[@dezradeathkill]

Comcast sucks but this is a problem with all ISPs because you'll never get the advertised speed unless you're literally hooked up to their hardware; all ISPs have their own access points across your city/town. The further you are from it, the slower the speed.

[@Nick-oc4qc]

Public notice: I was paying for a gig signal.....never got it.....4th or 5th tech came out and was a transfer from another state. Took him 2 secs to figure it out,......they upped the signal but because I had the WRONG modem it wouldn't work right.

[@sarahspratt1129]

Xfinity just sent me a “new” modem. It’s a xv6 like the old one in your video. And it’s sticky and has scratches on the top. Thanks, Xfinity. So great for the $300 a month I am paying you. Nice video - just wish I had the nicer modem!

[@djextrodinare9495]

Thanks 🙏🏽 for the video. Just ordered my new modem and picking it up from Xfinity in a few hours. This video is very helpful 👍🏽

[@tkashmere]

LIFE SAVER THANK YOU!!! the entire time I was waiting on customer service to help they never asked me if I had an Ethernet cord!!?? That’s what I was missing 🤦🏾‍♀️ that’s why my internet wouldn’t connect .

[@markuchiha7737]

If thats the case I apologize but you need to get on your own

[@calvinwilliams9075]

Thank you so much for taking the time out of your day to explain how to set the new modem up. It work out perfectly. 👍🏿

[@charlesrosenbloom4140]

nice video. i didnt read all of the comments, but the button on the back is not the reset. that is the WPS connection button.

[@marciekaeziegler6047]

Thank you! Thank you! Thank you! Xfinity didn't provide any instructions and I wasted a LOT of time searching for information. Much appreciated... You explained every step very clearly and easy to follow. 🙂

[@jadc409]

Thank you for this great “How to”. Just so happens I am replacing my modem as I watch this. Definitely much easier watching this compared to waiting 3 hrs for a callback from Xfinity! 😂

[@Smokey4462]

I'm about to set up my xFi Gateway, but I have a much older gateway that I'm replacing (Arris TG1682G). It uses both telephone ports and I suspect one connects back to the computer for various functions. Anyway, I'll just set up following the instructions you give, which by the way are great. Thanks!

[@cassiespencer6134]

It should be noted that the Ethernet port with the red line next to it is a 2.5 Gigabit port. The remaining three are standard Gigabit ports only.

[@JbHomestead]

Sadly many people do not know this.

[@marklee9352]

Thanks

[@charlesfullmer4662]

Whats that?

[@charlesfullmer4662]

Can u explain like if i am 5 years old?

[@mrmangbro6842]

@@charlesfullmer4662 the red one is 2.5x faster than the others.

[@rickmckee5737]

Great video. So much clearer than the Xfinity video explaining the same thing. They should hire you to make their videos. Thanks

[@pcallas66]

I appreciate you posting this. I just wish that you could get one that didn't have to get the coax hookup. For me, it's a deal breaker, but just you posting it is valuable knowledge. Thank you.

[@youtubert3138]

Do you always need the coaxial cable??? My old modem doesn’t…. I’m trying to connect this device of the video but I don’t have a coaxial……..

[@TheSpadre]

My experience with Xfinity has been a terrible one. First, they did something that fried my $500+ router/modem that I bought to accommodate the 1.2-gigabit service and I have been dealing with slower speeds that my older router supplies. I called to set up to use one of their rentals rather than pay $500+ for a replacement. The next day I went to my local store during my lunch break a 35-minute drive only to find that they closed the office because their system was down. Left work early so I could make it to the store before they closed @ 5pm only to find out that they couldn't give me a router because the person on the phone from the day before didn't put in the order and they couldn't put in an order for me so I could be on my way. I asked them to call Customer Service to place the order and they said they couldn't. I called while at the counter and after about 20 minutes of trouble with the agent on the phone, I finally was handed a new router. I get home to install and everything you mentioned was in the box except the only thing I don't already have. That's right, no power supply was in my box. I will have to repeat the pain in the azz of missing my lunch break to run back to the Xfinity store to most likely have to argue my way into getting them to give me a router. You can bet your azz that I will be opening the box to make sure everything is included before I leave the store. I hate Xfinity. If there was another option for me to get high-speed internet from a different provider, I would have left them a long time ago.

[@DrippleDragon]

On some real shit they are garbage dude, phone companies are about to start selling their own wifi routers etc so I hope it’s better and cheaper because fuck that bro, I don’t get why I need to go through all this unnecessary shit

[@reemj3675]

Yeah I was on the phone 2hours explaining & issue & after sheer exhaustion I googled something & hot the solution & fixed my own problem. So then I get my new gateway, set it up & use as usual. Less than a WEEK, I get an email saying I'd reached my data limit. I've had wifi for a good 20 urs & a LOT of devices that use it & never once reached that 1.2TB limit EVER. Called to find out why, got the solution the same way I did b4. She kept saying well this is higher speed so it's better, lady I understand gig speed my complaint was they didn't account for change in gig speed running through a month of data in 5 days. Why would I not expect this to be taken into account for a modem I didn't even request. I got it bcz my old one kept going in & out one night & I work online. I called , he ran a diagnostic test & said the modem I had was obsolete & they should have requested I get another sooner. So he said he'd send a new one bcz he saw our local one didn't have any . I asked if anything would change bcz I didn't want to pay more he said no everything would be the same just faster internet. I even remarked then our speed was pretty fast didn't really need that but if it's part of it, it is. Then BOOM, data limit in a week because of the higher speed on a product I didn't request. Literally just needed whatever came after the modem I had or at the very least, leave my speed where it was bcz in the next call, the lady said "ok I'll switch u back to..." whatever speed we had. So they raised my speed without permission then was going to give me more data & charge me for it without my requesting it. Hatem, haHated,, HATE THEM!

[@HaideeDonati]

Thank you so much for this video! You have no idea how informative and easy it made our set up. I told my husband I wanted to send you a thank you card! LOL

[@JimDeButts]

Thanks for the how-to video. The Xfinity video was worthless but using your video I replaced my old, intermittently failing router with the Xfi in about a half hour, start to finish, with no issues. I did have to re-add three Wi-Fi booster pods to the network but the Xfinity app handled that easily. The Xfi Wi-Fi speed is triple what I had before and signal strength is strong throughout the house now. Thanks again.

[@tjiron968]

Thanks so much Xfinity needs to pay you for these video explaining step by step 👍

[@jwm5455]

I’ll be setting mine up tomorrow. Need luck!!? And thank you so much for the video. You explained everything in such great detail. Only thing that I didn’t hear you talk about was ( what did the other end of the Ethernet cable’s go to?) Thanks again

[@JJFlores197]

The ethernet cable is used to connect a device like a computer or game console to the router instead of through wifi.

[@dianeclayton6063]

@@JJFlores197 Hi. if I'm not using a wired connection to my laptop, do I need to use the HDMI at all? i need to connect the TV with ethernet, or use out coax from modem to in coax at TV? Thanks!

[@JJFlores197]

@@dianeclayton6063 You're talking about 2 very different things. HDMI is a video cable. You use that to connect your TV to your cable TV box if you have cable TV service. If you do not have cable TV service, you don't plug an HDMI cable to your TV. If you want to connect your TV to the internet, you can usually plug in an ethernet cable to your router and TV OR most TVs have wifi built in. The coax cable is used to connect your modem to your internet provider. You don't usually plug in a coax cable directly to your TV anymore. If you still have cable TV service, you would plug in a coax cable from the wall to your cable TV box.

[@That_heisenberg-]

It keeps telling me “we can’t find your gateway” how do I fix that?

[@Jay-ho8uv]

same have you found a solution

[@ifeltnoluv]

@@Jay-ho8uv buddy when you ordered this when it came to you’re house did you have to sign anything because I’m 18 and i wanna order it but i don’t have a ID or anything and idk if that’s gonna be a problem or not please respond

[@Jay-ho8uv]

@@ifeltnoluv nah you should be good because i didn’t order it myself my brother did but i don’t remember him using his ID at all in the process of buying it plus i don’t think there’s anything that requires u to use it so i’m pretty sure you’ll be good

[@dmore9964]

Move it to another part of the house. If it still not working move it until it works.

[@DSharky]

I pressed the reset button on the back and then it found the gateway.

[@Klutzybear]

Thank you for the help. I was worried this was gonna be a nightmare like last time, but this went much better than before.

[@Slidinkillac]

Where do u plug the coax cord up to bc I jus got this box I’ve never had internet in my house ever and I don’t have a place to plug that up in my house beside the back of my tv????? This is frustrating

[@bridgetthmartin1939]

How to connect cables to TV and computer and do they have to be connected together? You do a great job explaining the steps. Thanks!

[@RvCt_Lobo]

Thank you I thought I had a bill unpaid or my internet was cut out the light description in the beginning already answered my issues

[@jonathansmookler4059]

Probably mentioned already, but the red Ethernet port is the 2.5Gbps port. The other three are 1Gbps

[@TheBlackDahlea]

He didn’t mention it, I noticed that too

[@s.dudley5072]

I even went to the store to give mine back because it came with no instructions. Of course, the manager there said they'd schedule someone to come out and install it and that was a month ago. Go figure. Xfinity owes you BIG TIME because I was about to simply disconnect it because I have AT&T Fiber and only use Xfinity as a backup. Thank YOU!!!

[@Gulmirka715]

Thank you so much for your help I've been researching this for a week

[@Al3x33c]

Mine won’t find the modem what does that mean

[@jafarmujahid-alexander9497]

Thank you we're just moving so this really helped

[@bl6797]

You didn't show us where to plug the other cables into the back of the TV.

[@killdavidd]

Cuz thats just common sense

[@donavinb.9774]

I don’t see that app in the App Store. Is it called something different now?

[@jjsmama401]

I had to walk a couple blocks to watch this since I disconnected my old router before I started and now I have no internet.

[@lord4minato936]

mine has only been blinking orange and when i try to find my modem on the app it says we couldnt find it

[@louiegreen4957]

same

[@HowToWithGEO]

The modem initially comes with its own user name and password. The easiest way to change it is by using the Xfinity app and using the QR code on the bottom of the modem and follow the instruction to change your modem user name and password. My video doesn't go through this entire process. If you have any issues setting up the app and modem I recommend you contact Xfinity. Hope that helped.

[@northmemphis48]

@@HowToWithGEO if its blinking orange she need a technician that means line is dead .if the line is active after load for 10 minutes the light should blinking white which indicated the line is active after activation the light should be solid white.

[@jonathanmanuel4453]

THANK YOU SO MUCH! I was literally going insane.

[@PurpleGuyMakesBeats]

We just got this one, every cord is connected, the black box says the time, but the modem white tower is blinking and the tv won’t turn on. What do I do?

[@KennyRogacki]

So it just keeps blinking orange it won’t turn white

[@GreenStuffConsumer]

thank you. the app wasn't helpful and there was a connection issue while setting up but you showed me I was doing things out of order

[@sinwolfe4868]

See that’s great but I need to know where the comcast cord goes into the wall???

[@saintinlower48]

Thank you! A few directions that I did receive came in another language, thus I decided to find a video. I would not have known to download an app. Your directions made this so easy. Though, it seems that I don't have to do anything with the yellow ethernet cable. I really appreciate this video you made.

[@big6521]

There's no instructions. I downloaded the xfinity app, and it wasn't the xfinity app. I got hacked. Had to get a new debit card. Didn't have a QR code reader. Had to download one. I'm an old man, this internet crap is too much trouble. Where's a piece of paper I can read? I guess I'll have to ask my phone where the ethernet cable goes? I may seem dumb but, can you see my point?

[@BarGolum]

Thank you for the video but where is the yellow cable connected to? Yo the modem and then where you connect this yellow line thx

[@ChupieDeRasta]

Hey man thanks so much for this video. I watched it once then watched as I did everything. Thanks again

[@jeremybarbieri7325]

What's the little red line next to the either net port?

[@devinnashatka7639]

Mine never stopped blinking orange

[@BalledUpBabyshoeHead]

Right

[@tonikoscak7209]

What did you end up doing?

[@johnghadimi]

Is there anything special about their included Coax cable, or can I just use the one I have right now?

[@unknownKnownunknowns]

Any tips on how to best take advantage of the single 2.5 GB port? What device should I plug into that one?

[@rxz_vlix7942]

Orange blinking light won’t go away or connect

[@oldsexyjames3771]

Your explaining how to is simple, no muss, no fuss (no cussing me 🤬). I appreciate your help and I will subscribe. Thank you!

[@melissagross3180]

THANKS FOR YOUR VIDEO I WAS READY TO TOSS THIS MODEM OUT 3RD STORY WINDOW UNTIL YOU HELPED ME GET MODEM ACTIVATED !!

[@mcocdiobrando7254]

Thank you so much, never would’ve figured this out

[@pameliahooks2741]

Hello there thanks for your video I have setup everything correctly thanks to you 😊👍

[@ItzMeNike]

Q. If I have a coax cable already can I just move it from a current modum to the new modum or do I have to use the coax cable that came with the new modum in the box?

[@jhonmigueldiaz5902]

u can use the same coax cable..

[@princehydron3599]

Do I have to use an Ethernet cable on this? I've been trying to set it up, but it always fails and a white light flashes.

[@zaythabugg877]

Did you ever figure it out cuz I just got mine and it didn’t come with one

[@princehydron3599]

@@zaythabugg877 I ended up having to take my router back. The one they gave me wasnt working properly. I also had to get my mother to Karen her way through the customer service to get my new router connected.

[@ronaldfowler7656]

Mine just came via UPS, gonna hook it up later, thanks for the instructional vid. Out of curiosity, have you noticed any improvement in speed, coverage ? Update!! I used to get about 400mps with the old modem, now I’m getting 700+ with the new one!

[@gdxseraph3175]

How long did it take?

[@ronaldfowler7656]

@@gdxseraph3175 about 4 days, including a Sunday

[@lucashoeft5472]

I’m not sure why mine is acting different.. I literally did exactly what you did with it and it is not hooking up this simply

[@hectorcarrasco3394]

Mine didn't come with an ethernet cable at all

[@Joepul]

Literally same with ours

[@Cableman-hr2uu]

Before you run the app and setup the router, do you require to connect to another wifi and if you are in a new connection and there is no other wifi, how your app can connect to the internet to do the setup ??

[@DaveChambers-m4s]

Just got mine. Easy to install BUT it has a constant low hum to it. I can hear it in the next room and will drive me crazy. Putting my old one back in.

[@NinjaKittyBonks]

Thanks! Seems I need a cell phone with this Xfinity App to connect to the internet OUTSIDE of the equipment i am connecting... makes sense. However, I do not have, nor will I get a cell phone, so hoping their is an alternate way.

[@norbertomoran4575]

Super helpful. Succinct yet effective.

[@Mcaps29]

Waitttt what if mine didn’t come with the yellow?

[@zulu123-x2d]

Does the third generation xb6/xb7 gateway have any UPS (power) solution? Any small UPS that can power this unit? Thanks

[@SheriHavens]

Michael Axel cable does not look exactly like your coaxial cable. I get an message from the Xfinity app that I need a technician.

[@zebonautsmith1541]

The modem has no lights. How do you get feedback? Single center light must have colors?

[@naxielygonzalez9084]

does the modem come with wifi or is this just the box that you connect your internet cable into?

[@mikeo7801]

If you plug the coax cable into the modem, how do you also plug the coax cable into the xfinity cable box for cable tv?

[@JJFlores197]

You'll need a coax splitter. I don't have any in particular to recommend though.

[@bubbamyers4604]

My orange light never turns white. What could be the issue??

[@JustinMajors-n1v]

They didn’t send me the yellow Ethernet cord. Can I use the old one? Not tech savvy at all. They didn’t even put instructions in the box. Thx for the video

[@northmemphis48]

everybody this video is for people who are lucky to have an avtive cable line in there home if you never get blinking white light after 20mins of installation of coaxes cable your going to need a tech visit .

[@Beelevy12345]

That mane had two cords Ethernet and phone and I only have one. But the old router just needed the hookup I have. I'm so lost mane

[@northmemphis48]

@@Beelevy12345 ok ethernet cord has nothing to do with installation you just need coaxial cord coming out of the wall ethernet cord is for faster internet speed after activation 2 PC or laptop

[@AJGschwind]

FYI. It does matter which one you plug into. The one with the little red line is the fastest port on the unit.

[@johnstephen7610]

This is a very helpful video. I will have enough confidence now to try this myself. But I have one question, if you're still monitoring comments on this video. You pointed out there are four Ethernet ports on the back. But one of them has a red stripe next to it. Looking inside that port, there is a letter "G" in there. Is that port for some particular use? Thanks in advance.

[@niqueodums3123]

Where does the other end of the yellow cable go 😫

[@karissamarshall8167]

I did all this, my modem doesn't show up on my xfinity app in my devices. It still says I need to activate it. But it keeps failing. But my devices are connecting to it?

[@alpomey225]

One of the ethernet connections on the back of the modem/router has a red line. What does the red line mean?

[@Cbam871]

It's really that simple? I just got mine for my new apartment

[@shotpack8374]

The Xfinity home app says that “your home monitoring has been moved to the Xfinity app” . The camera thing doesn’t show and I can’t use the Xfinity home app. What do I do?

[@jcthejammer]

Can u still use the app and install it all with no service at your house.

[@cpear760]

I have the XB3, and the mothership sent us an XB6 as our upgrade.

[@darleenstukey4026]

Please tell us why there is a red line on the Ethernet port at lower right corner.

[@jimmyburks4345]

Good video. Thanks for not using background music. Now the question. Why is the ethernet port marked with orange? I can't get answer anywhere. Curiosity is eating at me. Enjoy

[@SamanthaRobertsPrescod]

For the yellow cord where did you hook it up from modem to wall?

[@vjoshton]

If I buy this do I have to have cable for the wifi to work? I just want to buy it so I can have my own internet in my college dorm on campus. I plan on using an Ethernet cord and connecting it to my game. Just asking to see if I can make this purchase without having to have a coax cable in it.

[@hannahjohnson4475]

I had to get a new modem because my old one didnt work. when I received the new modem the cox cable is too short. can I use my old cox cable?

[@jasmineprince]

Maaaan thank you so much! This was super helpful.

[@jamesscarcelli4309]

where do the ether net cables go and were connected.

[@Thatguynahom]

Does it no longer have an easy connect button or am I blind?

[@flemmingj1965]

I rent the black version Xfinity xFi XB6-T with mu own tp-link router but lately my internet kee ps dropping when i owned my own modem in the past i had no problems why am i having problems with the one I rent ??

[@thetawaves48]

Do you need to have an xfinity mobile phone to do this?

[@vinnymarkis7075]

Miss info, the ethernet port number 4 (the one with the orange/red line) is the only 2.5 G!!! The 3 other one are 1G

[@thetawaves48]

I still have a set top TV box (comcast) for two TV's. Does this modem replace these boxes?

[@dbrjaxfl]

Thank you! What would be so hard for xfinity to do this?