HOYT VENTUM 30 PRO Full In Depth BOW BUILD (84lb Monster!!)

[@stephenferguson6363]

Just ordered a hoyt vtm 31 with 80 pound limbs.... Iv had a few hosts over the years and absolutely love my 80# bows.

[@tylerhoesly3099]

So entertaining to watch a bow be put together, really nailed the at home setup for this!

[@Jory623]

Put a turnbuckle between your dloop and hook on your drawboard then you can microtune if you get caught between clicks on the winch

[@WhitetailFit]

I like that!

[@benwilson7597]

Outstanding video. Love being taken through the bow setup process. Thank you

[@barkeroutdoors6444]

Love your videos, any chance you'd do a video of you shooting that thing and dialing in your stabilizers?

[@WilliamsonProductio1]

Great video man! You do your thing but when adjusting timing add a twist to cam that hits first vs take out from slow cam taking twists out you run chance of loosening your serving since your serving is twisted same orientation as string is. Working on your own stuff is the best keep it up man

[@Erick-ie8ll]

Great video. And it’s nice to hear someone differentiating between cam timing and cam sync.

[@ricardoeduardofigueroa3727]

hey buddy, your video is amaizing, I just bought that ventum pro 30 and I´ve already set up all the items but the fall away arrow rest QAD mod. ultrarest R2 has been a issue cause the fletching slide the arrow rest and I haven´t the way to fix this frustraiting problem

[@thebasshogg7472]

Can the side bar mount fit in the quiver hole ???

[@Cooldibs]

So if you didn’t get a bullet hole when you first shot it inside, would you need to mess with cam shims or the arrow rest?

[@xfighter1117]

Nice rig. Ive got a pro 33 72 lbs it’s a smooth shooter.

[@brucehillbillybarthalow3786]

Great Video, What kinda speed are ya getting of that system? I'm a 27.5 in.draw and am curious about speed 80lb. Thanks

[@mikemchugh9164]

This is probably a basic question but I'm struggling to find a video to help me out. I recently purchased a 2022 Hoyt Ventum Pro 30, I want to do the build myself and I am going slow to get it right, Question ??When setting my nock height or position on my string, some say to measure from axle to axle, cut in half and measure off one axle and there is your center on the string, Others talk about a high nocking point? I also purchased the Hoyt QAD rest and some say to put the rest on and zero the rest out on the bow limb marks for the rest and then find your nocking point off the rest with a string T-square. Sorry for the long winded question but any guidance and advice is appreciated.

[@michaelurban2841]

Sweet looking rig. I'm kicking myself in the ass right now. Traded my mathews vertix in September of this year for a bowtech solution. Really should have traded for a hoyt. They shoot really well and feel pretty dead in hand after the shot.

[@feralgrandad4429]

Literally, ordered one this afternoon. Will be here for weekend. Same cam (I've a hobbits 26.25 inch draw length lol) Great video as usual mate. 😁

[@feralgrandad4429]

Joel, what arrows will you be running through your ventum please?

[@wcwcgarner2717]

Did you get your new hoyt and how do you like it

[@jeffreyccv]

Score for sure. So I have last year's ventum 30. I don't understand if these new hbx pro cams are more advanced . Why is last years ventum 30 shoot the same feet per second. With all else being negligible. For me the bows aren't interchangeable .. so to me it's a marketing ploy. .. I still can't decide between AAB strings or GAS strings any thoughts? Cheers

[@Rivers2Timber]

Great video! I’m looking at getting my first bow would it be crazy to get this ventum 30 as a first bow?!

[@tonybostick8414]

I wonder about the 80lb limb s I have the same bow with a 65lb and I smoke big hogs here in FL and deer all over is it just a personal thing. I have a friend that goes to Africa and he has an 80lb set up but I get that. Anyway just wondering

[@WhitetailFit]

I like to shoot a 450-480g arrow for hunting. And with my draw length only being 27” the 80# limbs allow me to keep a 280-290+ fps arrow speed. That allows for more forgiveness when hunting. 👍🏼

[@tonybostick8414]

Thanks for the reply

[@melburn74]

How far is your arrow from the riser when it's sitting in the rest?

[@claytonchristensen9140]

I understand playing with the strings and cables allows you to increase your draw weight, but how do you do it without it messing up your draw length?

[@Ranger.Vt.]

Looks killer ! What release do you shoot ?

[@WhitetailFit]

This is a truball blade pro!

[@Ranger.Vt.]

@@WhitetailFit Thanks !👍🏻

[@xfighter1117]

@@WhitetailFit are you doing a short list giveaway? I just got a notification to text a number from your channel. Making sure it’s not a scam thanks.

[@WhitetailFit]

@@xfighter1117 no I am not, that is a scam account!! Thanks for the support, please report that account if you can!!

[@xfighter1117]

@@WhitetailFit it’s your account I’ll try and see what I can do

[@jonathanfunnell4167]

LOVE IT ITS BEAUTIFUL

[@chromaticvisionstudio5489]

What’s the total cost for a build like yours?

[@Ericksonearthworks]

I gotta ask. Is the PSE Expedite that bad of a bow? I don’t have the money for a new Hoyt and I get a good deal on the PSE through work.

[@JSJTOUTDOORS]

Remember when you you were in school and and you weren’t cool unless you had these shoes or this bicycle. That’s how people are with Mathew’s and Hoyt today. They’re no better than any other bow. It’s more of a hey look what I have , I own an expensive bow so I am cool. Most bows are very similar these days. I like Pse because they don’t have that big cult following like some of the others.

[@hunterdemmon3916]

That string/cable with that buckskin looks cleannnn. Love your videos!

[@cjdibattista]

Beauty Bow

[@jessicaknight9312]

My guy im on my gf youtube but anyways i see u have the new hoyt pro series stabilizers. I just recently got the ventum pro 30 and i havent chose the stabilizers im gonna run. I cant find the new hoyt stabilizers at all. Did u get them from a hoyt dealer, did u call/email hoyt, how'd you get yours?

[@Chad.Maness]

How do you get 84#

[@michaelyanni4422]

great !!!!!!

[@asdfkhieee]

How is pull at 80lbs? I got to shoot this at 70lbs and it's a nice easy pull, but I hear the pull at 80lbs is a completely different monster.

[@timparrish1847]

Watching close PS LIKE your range I have one from 0-60+yds and then 60-90+yds over a pond and 7 3D figures I'm not a pro but check your D loop , I would have mushroomed the ends more the first one before I even tie it Your ontario friend

[@WhitetailFit]

Heck yeah!! Gotta love a good range!! On the Dloop I mushroomed it good 👍🏼 just cutting and splicing video to try an make it a consumable length haha. I’ll do more videos that are specifically targeting each step like d loop and nock sets 👍🏼

[@timparrish1847]

@@WhitetailFit REALLY GOOD edit job I didn't see any cut Thanks for the YES I DID I pull 78 lbs on a V3 so I know what could happen if it let go COOL and THANKS your ontario friend

[@jeffreypereira9697]

Nothing like some soft porn music to go along with a killer bow build.

[@jordanbrooks946]

I traded my ventum pro 30 for a lift this year. Wasn’t impressed with the alpha x

[@joshuakendra7468]

Nice Bow still a PSE guy but Hoyt makes some nice bows.

[@EChunter]

Don't paper tune without the stabs on.

[@matthewmcnulty698]

Just. Carious why isn't your Buddy who is bow only outdoors. Doing The work on your bow Just carious

[@alananderson5202]

Lots of moving parts. It is an engineering marvel. Not as pretty as an Ed Scott owl bow.

[@1989inception]

Wish you would have talked three the whole removing an putting on the new strings.. would have been cool to know how its done from your view.

[@WhitetailFit]

Noted! I might dive deeper on my RX7 build coming up!

[@joshuakendra7468]

Did you send me a number to contact or is it a scam?